Bike-Lift CFL-500 User manual

Operating manual No. 057-2-6-0008-R0 Page 1
Version 2018
EN
EC Use and Maintenance Manual
Central lifting platform
CFL-500
Model
Version

CFL
-
500
CUSTOM VERSION

CFL
-
500/Q
QUAD/ATV VERSION
Bike-Lift EUROPE s.r.l.
via Don Milani, 40/42
43012 anguinaro di Fontanellato (PARMA) – Italy
Website: www.bikelifteurope.it
E-mail: [e-mail]

Operating manual No. 057-2-6-0008-R0 Page 2
Version 2018
EN
Summary
1 Information s ction ............................................................................................................................. 4
1.1 Pr fac ............................................................................................................................................... 4
1.2 Prohibitions ....................................................................................................................................... 5
1.3 Warranty ............................................................................................................................................ 5
1.3.1 Warranty conditions .................................................................................................................. 5
1.3.2 Insuranc ................................................................................................................................... 5
1.4 Manufactur r id ntification .............................................................................................................. 6
1.5 T chnical assistanc and spar parts ................................................................................................ 6
1.6 EC D claration of conformity ............................................................................................................ 7
1.7 Normativ r f r nc s ........................................................................................................................ 8
1.8 K y ..................................................................................................................................................... 9
2 Machin d scription ................................................................................................................... 10
2.1 Machin nam ................................................................................................................................. 10
2.2 Machin id ntification ..................................................................................................................... 10
2.3 Machin d scription ........................................................................................................................ 11
2.4 Int nd d us and r asonably for s abl misus .......................................................................... 12
2.5 T chnical sp cifications ................................................................................................................... 13
2.5.1 CFL 500 .................................................................................................................................... 13
2.5.2 CFL 500 Q ................................................................................................................................. 13
3 Saf ty s ction .................................................................................................................................... 14
3.1 Environm ntal working valu s ........................................................................................................ 14
3.2 Sound l v l ...................................................................................................................................... 14
3.3 R sidual risks ................................................................................................................................... 14
3.4 Op rator prot ctions ....................................................................................................................... 15
3.5 Saf ty syst ms ................................................................................................................................. 15
3.6 Pictograms ....................................................................................................................................... 16
4 Transport and handling s ction ...................................................................................................... 17
4.1 Transport, handling and storag ..................................................................................................... 17
4.2 Packaging and transport .................................................................................................................. 17
4.3 Unloading and handling ................................................................................................................... 17
4.4 R c ipt and ch ck ............................................................................................................................ 17
4.5 Storag ............................................................................................................................................. 17
5 Installation s ction .......................................................................................................................... 18

Operating manual No. 057-2-6-0008-R0 Page 3
Version 2018
EN
6 Dismantling/scrapping s ction ........................................................................................................ 20
6.1 Dismantling ...................................................................................................................................... 20
6.2 M chanical dismantling ................................................................................................................... 20
6.3 Scrapping ......................................................................................................................................... 20
7 Op ration s ction ............................................................................................................................. 21
7.1 Loading op rations .......................................................................................................................... 21
7.2 Unloading op rations ...................................................................................................................... 22
8 Maint nanc s ction ........................................................................................................................ 23
8.1 Lubrication ....................................................................................................................................... 23
8.2 Jack r plac m nt ............................................................................................................................. 23
8.3 Cl aning ........................................................................................................................................... 24
8.3.1 Initial cl aning .......................................................................................................................... 24
8.3.2 G n ral cl aning of th machin ............................................................................................. 24
8.3.3 Cl aning of th work ar as ...................................................................................................... 25
8.4 Probl ms and r m di s ................................................................................................................... 25
8.4.1 FOOT PUMP ............................................................................................................................. 26
SPARE ............................................................................................................................................................... 29

Operating manual No. 057-2-6-0008-R0 Page 4
Version 2018
EN
I
1 Information section
1.1 Preface
Th EC Us and Maint nanc Manual is a docum nt issu d by Bik -Lift Europ s.r.l. as an int gral
part of th Machin .
Th purpos of this publication is to provid th op rator with ffici nt and saf instructions
r garding th us and maint nanc .
This Manual must b r ad ntir ly b for starting any op ration conc rning th
installation, us , maint nanc and putting out of s rvic of th machin ; th r for it is
n c ssary to b k pt intact ov r tim .
In ord r to prop rly stor th Manual it is r comm nd d to:
 Us th manual without d t riorating it;
 Do not r mov , add, chang or r writ any part of th Manual; any modifications must b
mad only by Bik -Lift-Europ s.r.l.;
 K p th Manual in ar as prot ct d against humidity in ord r not to compromis its
durability ov r tim ;
 D liv r th Manual to any oth r us r or subs qu nt own r of th Machin .
Work rs in charg of using this machin must hav all th n c ssary information and
must r c iv prop r training.
Th manual and r lativ docum ntation ar confid ntial by law with th prohibition of
r production or transmission to third parti s without r c iving th xplicit authorization of th
manufactur r.
As a partial xc ption to th abov m ntion d, a copy of this Manual k pt in th vicinity of th
Machin is allow d for prompt r f r nc , in cas th original docum nt is stor d in a diff r nt
plac , in ord r to guarant b tt r k ping ov r tim .
Drawings, data and sp cifications contain d in this manual can b modifi d at any tim by th
company, without prior notic .
In cas of significant chang s of th machin du to th installation of n w parts, Bik -Lift Europ
s.r.l. will compil an updat d Manual that will b s nt to th Custom r tog th r with th
purchas d part.

Operating manual No. 057-2-6-0008-R0 Page 5
Version 2018
EN
1.2 Prohibitions
Th installation, us , maint nanc and putting out of s rvic of th d vic with m ans, obj cts,
actions and anything ls not provid d for in this manual is consid r d improp r and th r for th
manufactur r d clin s all r sponsibility for th cons qu nc s that may occur r garding p opl ,
animals and obj cts.
It is xpr ssly FORBIDDEN th us of th Machin by Op rators who do not know th
r gulation and proc dur s d scrib d in th Manual and by unauthoriz d p opl
(h r inaft r r f rr d to as "non-op rators").
It is also forbidd n th us of th machin by childr n and th non-op rators or childr n must not
stand n ar th machin during all phas s of th machin 's lif .
Th putting out of s rvic of th prot ction syst ms or anything ls provid d by th
manufactur r to prot ct th op rators is th sol r sponsibility of th Purchas r or th Machin 's
Us r.
Any m chanical, l ctrical or functional chang of th Machin (not provid d for in this Manual)
r garding th control syst ms, th logic of controls, th circuits pr s nt and th saf ty syst ms is
prohibit d without th prior writt n authorization of th manufactur r.
1.3 Warranty
Bik -Lift Europ S.r.l. will not b h ld r sponsibl for inconv ni nc s, br akag s, accid nts, tc.
du to lack of knowl dg or failur to apply th proc dur s sp cifi d in this Manual. Th sam
appli s to th x cution of modifications, chang s or for th installation of acc ssori s not
pr viously authoriz d.
1.3.1 Warranty conditions
Bik -Lift Europ s.r.l guarant s its products for 12 months, xc pt for th comm rcial
compon nts that ar guarant d by th manufactur rs.
All worn parts ar xclud d from th warranty.
Th warranty is limit d to th r plac m nt, x-works Bik -Lift Europ s.r.l, of thos parts that ar
r cogniz d as d f ctiv by Bik -Lift Europ s.r.l du to a mat rial or manufacturing d f ct and do
not includ labor or trav l xp ns s r quir d for th ir r plac m nt.
Th r cognition of th warranty is void if th anomaly is du to an inappropriat us of th
product, if th installation was not carri d out according to th provisions of th company or if
non-g nuin parts w r install d.
It also b com s void if th product has b n submitt d to p rformanc s xc ding thos indicat d
by Bik -Lift Europ s.r.l.
1.3.2 nsurance
All Bik -Lift Europ s.r.l products ar insur d with an RCP policy with a pric c iling of € 3.000.000.
Damag s caus d by n glig nc or tamp ring ar xclud d.

Operating manual No. 057-2-6-0008-R0 Page 6
Version 2018
EN
1.4 Manufacturer identification
Bik -Lift EUROPE s.r.l. via Don Milani, 40/42, 43012 Sanguinaro di Fontan llato (PARMA) – Italy
Website: www.bikelifteurope.it
E-mail: [email protected]
T l: 0039-0521-827091 Fax: [phone]
1.5 Technical assistance and spare parts
To ord r spar parts, it is r comm nd d to sp cify xactly th following data:
 Mod l and s rial numb r of th machin ;
 Cod numb r and part nam ;
 R quir d quantity;
 Shipping m ans, addr ss and t l phon numb r;
For r plac m nts us only g nuin spar parts.
Do not wait until th compon nts ar compl t ly worn b for r placing th m.
CAUTION: THE RECIPIENT WILL BE CHARGED FOR THE REPLACEMENT TOGETHER WITH
THE SHIPPING COSTS.
W r comm nd that you always contact Bik -Lift Europ s.r.l. for all thos Assistanc and
maint nanc op rations that ar not d scrib d or indicat d in this Manual.

Operating manual No. 057-2-6-0008-R0 Page 7
Version 2018
EN
1.6 EC Declaration of conformity
EG-KONFORMITÄTSERKLÄRUNG
(Anhang II, Teil 1, Abschnitt A der Richtlinie 2006/42/EG)
Der Hersteller:
Unternehmen Bike-Lift EUROPE S.r.l.
Anschrift Via Don Milani, 40/42 - 43012 Sanguinaro di Fontanellato (PR) - Italien
erklärt in alleiniger Verant ortung, dass die Maschine:
Produktbezeichnung Hebevorrichtung CFL 500 CFL-500Q
Modell CFL-500 CFL-500Q
Seriennummer
Jahr
Funktion Heben von Krafträdern für Wartungsarbeiten am Fahrzeug
die grundlegenden Sicherheitsanforderungen der folgenden Richtlinie erfüllt:
 2006/42/EG - Maschinenrichtlinie
und mit den folgenden harmonisierten Normen übereinstimmt:
 UNI EN ISO 12100:2010 - Sicherheit von Maschinen - Allgemeine Gestaltungsleitsätze -
Risikobeurteilung und Risikominderung
 UNI EN 1493:2010 - Fahrzeughebebühnen
Person, die zur Erstellung der technischen Datei berechtigt ist:
Name Alessandro Tozzi
Anschrift Via Don Milani, 40/42 - 43012 Sanguinaro di Fontanellato (PR) - Italien
Sanguinaro (PR),
Alessandro Tozzi
Gesetzlicher Vertreter

Operating manual No. 057-2-6-0008-R0 Page 8
Version 2018
EN
1.7 Normative references
Th machin is id ntifi d by th CE marking drawn up according to th sp cifications of th
Machin ry Dir ctiv 2006/42/EC and subs qu nt updat s.
R f r nc Titl
2006/42/EC Machin ry Saf ty Dir ctiv
2014/30/EC El ctromagn tic Compatibility Dir ctiv (EMC)
2014/35/EU Low Voltag Dir ctiv (LVD)
EN ISO 12100 (2010) Saf ty of machin ry - G n ral principl s of d sign - Risk
ass ssm nt and risk r duction.
UNI EN 349 (1993+A1: 2008) Saf ty of machin ry - Minimum spac s to avoid th crushing of
body parts.
EN 1493 (2010) Europ an standard on v hicl lifting platforms
EN 982 (2009)
Saf ty of machin ry - Saf ty r quir m nts r lat d to syst ms
and th ir compon nts for hydraulic fluid and pn umatic
transmissions - Hydraulic fluid
UNI 1285-68 Calculation of m tal pip s r sistanc subj ct to int rnal
pr ssur

Operating manual No. 057-2-6-0008-R0 Page
Version 2018
EN
1.8 Key
LIFTING LATFORM: c ntral hydraulic lifiting syst m for th maint nanc and r pair of custom
motorcycl s and quads. Th sp cific id ntification of th lifting platform is indicat d on th cov r.
O ERATOR: In complianc with Dir ctiv 2006/42/EC and subs qu nt updat s, it is sp cifi d that
th t rm "op rator" m ans th p rson (s) in charg of installing, op rating, adjusting and cl aning
th lifting platform. Th maint nanc and r pair op rations of th lifting platform ar th
r sponsibility of comp t nt p rsonn l.
SYMBOLS MEANING
Y llow triangl pictogram g n rally indicat s a Warning /Risk, .g. risk of high t mp ratur s,
risk of crushing th hands, ...
BLUE round pictogram g n rally indicat s an Obligation, for xampl th obligation to w ar
c rtain PPE (goggl s ...) or th Obligation to r ad th Us r Manual.
Round r d Prohibition pictogram indicat s in g n ral a Prohibition, for xampl , p rson acc ss
prohibition, prohibition of hand acc ss whil th v hicl is moving.
Indicat s that th op ration can b p rform d by sp cializ d p rsonn l authoriz d by th
Employ r.
Particular importanc indication that r quir s att ntion.
Sp cifi s an op ration that can only b p rform d by train d p rsonn l, or aft r having r ad
and consult d sp cific op rating instructions.
It is forbidd n to ass mbl th v hicl wh n th kickstand is in us .

Operating manual No. 057-2-6-0008-R0 Page 10
Version 2018
EN
2 Machine description
2.1 Machine name
Custom Floor Lift 500 (CFL) is a lifting platform quipp d with a foot op rat d hydraulic syst m,
for th maint nanc and r pair of custom motorcycl s and quad bik s with a maximum capacity
of 500 kg.
This manual r f rs to th mod l of lifting platform indicat d on th cov r
2.2 Machine identification
Th id ntification data of th machin ar indicat d on th plat plac d on th structur and
shown in th attach d d claration of conformity.
R f r to th s d tails for ord ring spar parts and for any kind of contact with th manufactur r
It is absolut ly forbidd n for th us r to r mov or alt r this plat . Any modification or r moval of
th plat will void any warranty.
Th machin s can b subj ct to updat s or small a sth tic chang s and th r for hav diff r nt
d tails than thos shown, without pr judic to th d scriptions and proc dur s contain d by this
Manual.
Figure 1 – Example of a plate affixed to the machine

Operating manual No. 057-2-6-0008-R0 Page 11
Version 2018
EN
2.3 Machine description
Th machin known as Central Lifting latform is a suitabl quipm nt to support custom
motorcycl s and quad bik s during th maint nanc and r pair phas in a comfortabl and saf
way.
a) b)
Figure 2 – Example model of lifting platform: a) CFL 500 lifting platform for custom motorcycles; b) CFL 500 Q lifting platform for
quads and ATVs
Th basic parts of th lifting platform (s Figur 2) ar :
- An (orang ) lifting structur through a load and unload p dal syst m;
- A bas quipp d with 2 braking wh ls (black) and 2 fr wh ls.
Th fall prot ction syst m (shown in y llow in th following figur ) consists of:
a mobil anchoring tooth d bar on th bas with automatic
coupling that pr v nts th accid ntal d sc nt of th mobil
surfac .
To d activat th anchoring of th bar and allow th lifting
platform to go down, us th appropriat p dal on th bas
(as ncircl d in r d in th pictur ) that is dir ctly conn ct d to
th tooth d bar.

Operating manual No. 057-2-6-0008-R0 Page 12
Version 2018
EN
2.4 ntended use and reasonably foreseeable misuse
Diss minat th instructions d scrib d in this chapt r to all p rsonn l involv d in
th pr paration and us of th machin .
- CFL 500 machin is int nd d for lifting cruis rs and custom motorcycl s for maint nanc
purpos s;
- CFL 500 machin is int nd d for lifting quads and ATVs for maint nanc purpos s.
Th machin has b n d sign d and built for th sp cifi d us ; a diff r nt us and
non-complianc with th t chnical param t rs s t by th Manufactur r may b
dang rous for th op rators.
It can b us d in th m chanical motorcycl s r pair shops both for th m chanical part and for th
bodywork.
Any oth r us diff r nt from th on indicat d is to b consid r d as not plann d and
may caus damag to th machin and Op rators. It is th r for FORBIDDEN.
Th machin must always b op rat d by only on Op rator.
Th Op rator must always work in prop r lighting conditions and w ar cloth s and prot ctions
appropriat to th task p rform d (typical activity of m chanical workshop)
Th working position of th op rator during th asc nt and d sc nt phas s is in th frontal ar a of
th machin , paying att ntion to th up/down phas s (in th proximity of th asc nt p dal and
th d sc nt valv ).
Do not try to lift v hicl s w ighing mor than th maximum capacity of th
platform.
Do not try to lift four-wh l d v hicl s, using two lifting platforms plac d sid
by sid .
Do not ass mbl th v hicl wh n th kickstand is in us .

Operating manual No. 057-2-6-0008-R0 Page 13
Version 2018
EN
2.5 Technical specifications
2.5.1 CFL 500
(s xplod d diagram attach d to this manual)
CENTRAL LIFTING PLATFORM
CFL 500
PARAMETER VALUE
Maximum b aring 500 kg
Maximum h ight 45 cm
Minimum h ight 8 cm
Saf ty positions numb r 3
L ngth 41 cm
Width 38 cm
P dal op ration
W ight 30 kg
2.5.2 CFL 500 Q
(s xplod d diagram attach d to this manual)
VERTICAL SCISSOR LIFTING PLATFORM
PARAMETER VALUE
Maximum b aring 500 kg
Maximum h ight 55 cm
Minimum h ight 18 cm
Saf ty positions numb r 3
L ngth 41 cm
Width 38 cm
P dal op ration
W ight 30 kg

Operating manual No. 057-2-6-0008-R0 Page 14
Version 2018
EN
3 Safety section
3.1 Environmental working values
Th us nvironm nt of th machin must b w ll lit, must not pr s nt xplosion hazards of any
kind and must b prot ct d from atmosph ric pr cipitations.
Th machin works prop rly within th following valu s:
 Ambi nt t mp ratur b tw n 5° and 40° C;
 Ambi nt humidity b tw n 30% and 90% without cond nsation.
STORAGE: if th machin has b n unpack d, stor it in a clos d spac prot ct d from bad
w ath r conditions.
3.2 Sound level
During th normal conditions of us som m asur m nts w r mad at th workplac and around
th machin at a distanc of 1 m and at 1.6 m h ight abov th ground.
Th surv y was carri d out with a sound l v l m t r, complying with IEC 651 standard, class 1 and
th r sult of th ass ssm nt was low r than th minimum limit of action r quir d by th
r gulations in forc .
3.3 Residual risks
Th us of th lifting platform is th absolut pr rogativ of
prof ssional op rators and sp cializ d t chnicians, in complianc with
th r quir m nts of Machin ry Dir ctiv 2006/42/ EC and subs qu nt
updat s.
Op rators must b in full poss ssion of all physical and m ntal abiliti s during th p rformanc of
th ir tasks on th machin ; th y must not, for xampl , b und r th influ nc of s dativ s, drugs
or alcohol.
B for carrying out th work, th Op rators must b p rf ctly awar of
th position and op ration of all th controls and sp cifications of th
machin indicat d in th "EC Us and Maint nanc Manual".
It is forbidd n to us th lifting platform for a purpos oth r than thos provid d by th
manufactur r.
Always pay att ntion to th dang r and/or warning signs plac d on th machin or in adjac nt
ar as.
Th machin must always b op rat d by a singl Op rator who pays
particular att ntion to th asc nt/d sc nt phas s of th machin .
Th op rators standing ar as must always b k pt cl an and fr of any oily r sidu s to allow an
asy and saf passag .

Operating manual No. 057-2-6-0008-R0 Page 15
Version 2018
EN
Th putting out of s rvic of th prot ction and saf ty d vic s for prot cting th op rators is th
sol r sponsibility of th Purchas r or th Machin 's us r.
Finally, w r mind you that th handling, installation, us , maint nanc and putting out of s rvic
of th machin r pr s nt a sourc of dang r if th s op rations ar not p rform d in complianc
with th r quir m nts of this Manual or without th n c ssary caution and att ntion r quir d.
(Mor d tails r garding th Risk Ass ssm nt to b r qu st d from th Manufactur r).
3.4 Operator protections
B for starting any typ of work on th lifting platform, th op rator must
w ar appropriat p rsonal prot ctiv quipm nt (PPE), such as glov s and
saf ty footw ar.
Always w ar work clothing normally us d in th m chanical workshop
activity.
3.5 Safety systems
Th c ntral lifting platform (s Figur 2) consists of a lifting structur through a hydraulic p dal
syst m for loading and unloading.
Th fall prot ction syst m (shown in r d in th following figur ) consists of:
a mobil anchoring tooth d bar on th
bas , always op rat d with manual
r l as by m ans of a p dal
always ch ck that th tooth d bar and th lifting arms ar corr ctly int rlock d,
During th us of th lifting platform it is v ry important to pay th utmost att ntion to th asc nt
and d sc nt man uv rs.
Th p rsonn l who ar not in charg of using th lift must not pass or stand in th op rating ar a
of th motor v hicl s lifting platform.

Operating manual No. 057-2-6-0008-R0 Page 16
Version 2018
EN
Th machin must always b op rat d by only on Op rator.
Onc th v hicl is load d on th lifting platform, fast n it s cur ly with b lts
GIVEN THE BEARING VALUE INDICATED ON THE PLATE:
Do not xc d th load capacity of th lifting platform;
Us it only to lift obj cts;
Do not modify th lifting platform;
Th load must always r main firm and stabl .
3.6 Pictograms
Dang r of crushing hands with th lifting platform arms.
Wh n th platform is at th d sir d h ight, ins rt th locking bar to pr v nt it from
falling down accid ntally.
Load th v hicl only wh n th platform is compl t ly low r d;
B for lifting it, mak sur that nothing is support d by th ramp;
Do not l an th r ar wh ls of th v hicl on th ramp during and aft r lifting.

Operating manual No. 057-2-6-0008-R0 Page 17
Version 2018
EN
4 Transport and handling section
4.1 Transport, handling and storage
CAUTION: Diss minat th instructions d scrib d in this chapt r to all p rsonn l
involv d in th transport and handling of th machin .
For saf ty r asons, th moving parts must b lock d b for transport.
4.2 Packaging and transport
Th machin is pack d for transport dir ctly from th Manufactur r.
It is suppli d ass mbl d, xc pt for th jack and th wh ls, with a cardboard packag .
Th cardboard packag s must b lift d and handl d by using suitabl lifting/transport quipm nt
as r quir d by curr nt r gulations ( .g. pall t jack, tc.)
4.3 Unloading and handling
All lifting and unloading op rations must b carri d out in complianc with curr nt saf ty
r gulations.
4.4 Receipt and check
Th packaging is mad of suitabl mat rial and is carri d out by xp rt p rsonn l, but during th
journ y it is possibl to b d t riorat d or damag d.
Upon r c ipt of th machin , imm diat ly ch ck if th packag s ar cl arly damag d. If so, acc pt
th goods with r s rv , by making photographic vid nc of any damag .
Op n th box by cutting th clips and th closing adh siv tap .
Mak sur all th mat rial shown on th d liv ry not is actually pr s nt.
Mak sur th parts of th machin hav not b n damag d during transport and notify, within 5
days of r c ipt, any damag to th Carri r by REGISTERED LETTER (and notify Bik Lift Europ
s.r.l.), by pr s nting photographically docum nt d vid nc .
4.5 Storage
P nding to b unpack d and install d, th machin must b stor d in a suitabl nvironm nt in
ord r not to alt r its op ration.
 Stor th pack d machin in a clos d or cov r d ar a abov th ground by using sl p rs
or similar obj cts.
 Room t mp ratur and humidity: -5°/75 ° C R lativ humidity b tw n 30% and 90%.
 Do not ov rturn th packaging.
 If th machin is stor d without packaging, it must b position d firmly on wood n
sl p rs and cov r d with a cloth.
 Do not stack anything on th machin .

Operating manual No. 057-2-6-0008-R0 Page 18
Version 2018
EN
5 Installation section
Th machin must b install d in complianc with th saf ty r gulations and instructions includ d
in this chapt r.
Th machin do s not n d a basis, but r quir s a flat and horizontal floor. Th floor must b abl
to support a minimum w ight of 500 kg/m2•
Th lifting platform must b plac d in such a way as to allow th Op rator to asily r pair th
custom motorcycl s and quads.
Th lifting platform must th r for b install d by taking into account th minimum distanc s
from walls or oth r possibl boundari s (boundari s ar imaginary lin s that d limit th work or
saf ty ar as of oth r machin s or structur s).
WARNING: It is absolut ly forbidd n to position th lifting platform on bumpy
or inclin d ground.
1- R mov all compon nts from th box taking car not to los any pi c and plac th
structur of th kickstand on a work surfac at a suitabl h ight.
2- Lift th structur manually until it hooks th m chanical saf ty on th first position (Figur
3).
Figure 3
3- Position th cylind r by ins rting th All n scr ws into th appropriat hol s, th n position
th bolts with th r lativ wash r from b low and tight n th m by using a No. 5 All n k y
and a No. 10 k y. Aft r tight ning th scr ws, proc d with ass mbling th asc nt p dal
(Figur 4).
Figure 4

Operating manual No. 057-2-6-0008-R0 Page 1
Version 2018
EN
4- At this point, th cylind r is lift d by pumping on th appropriat p dal (if it do s not lift,
ch ck that th unloading p dal is in th clos d position) until th st m is coupl d to th
r v rs d U-shap d crosspi c (Figur 6).
Figure 6
5- Onc th st m has b n ins rt d, continu to lift for a f w c ntim t rs, r l as th
m chanical saf ty kickstand and low r th kickstand to th r st position.
Figure 7
6- Loos n th two door knobs on th bas of CFL 500 and ins rt th two wh ls. Onc th
d sir d width is s t, tight n th knobs to lock th wh ls position. At this point th motor
v hicl kickstand can b us d.
Figure 8

Operating manual No. 057-2-6-0008-R0 Page 20
Version 2018
EN
6 Dismantling/scrapping section
6.1 Dismantling
Follow th R gulations r garding th mat rials dismantling in forc in th country wh r th
machin will b dismantl d.
H r ar som us ful indications in cas you must disass mbl th machin to r ass mbl it in
oth r ar as, stor it or d molish it.
6.2 Mechanical dismantling
B for proc ding with m chanical dismantling of th machin , car fully cl an th whol
structur (s Cleaning and Maintenance).
B for r moving th machin from its housing, r mov all moving parts by proc ding to th
opposit of what is d scrib d in th Installation chapt r.
For th lifting mod s and th r lativ sp cific saf ty pr cautions, r f r to th Transport, Handling
and Storage chapt r.
6.3 Scrapping
Th dismantling op rations of th machin must b carri d out in total saf ty by using th
prot ctions.
At th nd of th machin 's lif it is n c ssary to proc d to th prop r dismantling of th
compon nts that ar list d with r f r nc to th int r st d party:
 Support structur : F 360/S235
 Paint: Epoxy powd r
 Gask ts: Polyur than rubb r
 Oil: Hydraulic ISO VG 1O (W32)
D molish th diff r nt typ s of machin compon nts in appropriat landfills.
Always comply with th L gislation in forc in th Country wh r th machin is us d.