Bios living Sc427 User manual

Introduction

Thank you for purchasing the BIOS Living Digital Analog Scale. This scale was developed with state-of-the-art electronics. This precision

device has a weight capacity of 396 lbs / 180 kg and is equipped with an auto power ON / OFF function and auto zero reset.

Features

• Digital and analog displays • Auto ON / OFF

• Blue backlight display • Low battery and overload indicator

• Reminder alarm • Batteries included

• Accurate up to 396 lbs / 180 kg • 5 year warranty

Battery Installation

1. On the base of the scale, gently remove the battery cover.

2. Insert 3 x AAA batteries into the compartment observing the polarity markings. The LCD display will

turn on for 5 seconds then turn off. (See Figure 1).

3. After inserting the batteries, replace the battery cover.

4. Tap the center of the scale once to turn the scale on. The scale will go into calibration mode. Once

the calibration test is complete you will see on the display.

NOTE: Please be aware that inserting the batteries according to incorrect polarity

may cause permanent damage.

Unit Conversion

To change the unit LB / KG, switch the button located on the bottom of the scale.

(See Figure 2).

Using your Scale

1. Place the scale on a solid, level surface.

2.Gentlystepontotothescaleandtheunitwillautomaticallyturnon.Onceasteadyreadingistaken,thedisplaywillash3timesand

will display the weight.

3. The weight will stay on the screen for 5 seconds once you have stepped off the scale and then power off.

NOTE: If the scale is placed on a soft surface such as a carpet or an uneven oor, the results may be inaccurate

or an error message may occur.

Digital Analog ScaleDigital Analog Scale

Instruction Manual

SC427SC427

AAA

Kg/lb

Figure 1

Figure 2

Reminder Alarm

1. To turn the reminder alarm on, press the 24H/ALARM button located on the back of the scale. The

alarm will beep every 24 hours from the time you press the 24H/ALARM button. (See Figure 3).

2. An alarm icon will display on the screen.

3. When the reminder alarm activates you will hear a beeping from the scale reminding you to measure your

weight. Once you step on the scale the beeping will stop. If you do not step on the scale when there is

beeping it will continue to beep for 25 seconds and then stop.

4. To turn the reminder alarm off, press the 24H/ALARM button again and the alarm icon will

disappear from the LCD screen.

Troubleshooting

Error Problem Solution

Battery power is running low Replace with new batteries

Scale is overloaded Step off the scale to avoid possible damage to the product

Needle indicator is

not returning to zero Scale needs to be reset Remove the batteries, wait 10 seconds, and re-insert them into

the scale

Care and Maintenance

• Do not weigh yourself with wet feet, to avoid slipping.

• Always keep the scale in a horizontal position and do not put in wet or hot conditions.

• Avoid hitting or dropping the scale.

• Do not put heavy items on the scale when not in use.

• Do not overload the scale, as this will damage the sensor.

• Treat the scale with care as it is a highly precise electronic instrument.

• Do not immerse this product in water.

• Clean the scale with a soft, damp cloth. Do not use chemicals or harsh abrasives.

• Keep the scale surface dry and do notuseitonaslipperyoor.

Battery Maintenance

• If the scale is not being used for long periods of time, it is recommended to remove the batteries to avoid damage.

• Keep batteries out of reach of children.

• Do not mix old and new batteries with different compositions.

• Do notheatordeformthebatteriesorexposetore.

Specications

Power 3 x 1.5V AAA batteries

Display LCD display

Max Capacity 396 lb / 180 kg

Graduation 0.2 lbs / 0.1kg

Minimum Effective

Weight 11lbs / 5kg

Five Year Warranty

The Bios Living Digital Analog Scale has a 5 year warranty to be free of manufacturing defects in materials and workmanship under normal applications for 5 years of the original owner. If this

product becomes inoperable due to defect and requires repair, return the product with all component pieces and proof of purchase to the address listed below. This warranty does not cover