Birlea Urban Lamp Table S000350 User manual

URBAN LAMP TABLE
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR URBAN LAMP TABLE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber into the accessories pack.
HEALTH & SAFETY:
DO NOT use this lamp table if any parts are missing, damaged or worn.
DO NOT use this lamp table unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the lamp table as this will cause damage.
Always lift the lamp table with two people to repositions.
Keep any sharp objects away from the lamp table.
1
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 3
Vendor: S000350

Page of 3
Vendor: S000350
Parts List Hardware List
Part Descripion Qty Part Description Qty
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
01 1
Top panel
02
03
04 Metal Middle
B
C
1
8
8
JCBC screw M6 x 30mm
JCBC screw M6 x 40mm
A
2
Metal Side ( Left & Right ) 2
4
1
Bottom panel
Allen key M4
A
C
04 03
03
03
Step 1: Attach the Metal Middle (4) to Metal Side (3) using hardware A and C ( do not tighten all the screw first ).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
04
01
02
04
04
04
04
04
04
04
03
03

Page of 3
Vendor: S000350
3
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
Step 2: Attach the Metal Side (3) to panel (1) using hardware A and B ( do not tighten all the screw first ).
Attach the Metal Side (3) to panel (2) using hardware A and B ( do not tighten all the screw first ).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
AB
04
04
04
04 01
02
03
03
Step 3: Turn this product up side down and tighten all the hardware B and C using hardware A.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A
03
01
02
03 03
C
03
C
B
A
04
04
04
04
04