Birlea Highgate HIGCTCRO User manual

Page 1 of 6
ASSEMBLY INSTRUCTIONS
HIGHGATE COFFEE TABLE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
YOUR HIGHGATE COFFEE TABLE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Birlea advise you use the wall straps provided to further enhance the safety of this product.
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots,
grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear
after a period of time.
DO NOT place the item next to a radiator or direct sunlight - this item is susceptible to temperature
change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet - do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Vendor: S000398
www.birlea.com

Page 2 of 6
** WARNING: THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PARTS LIST HARDWARE LIST: Carton 1 of 1
Part Description Qty
Part Description Qty
1 Top Panel 1
ACAM NUT 15mm 36
BCAM BOLT 36
C WOOD DOWEL M6 x 25mm 32
D 4
PVC NAIL
Carton 1 of 1:
2Left Panel & Right Panel
3 Bottom Panel 1
4 1
5
8Right Front & Left Back Post Panel 2
9Top Support Panel
** You will need a screwdriver and a small mallet
( NOT provided)
2
2
Plinth Panel
Top Front & Top Back Post Panel
Bottom Front & Bottom Back Post Panel
Left Front & Right Back Post Panel
6
7
2
2
1
Vendor: S000398
1
2
2
3
9
4
8
7
7
8
5
6
5
6

Page 3 of 6
1A36
B
C32
4
Insert hardware part A & part B using a screwdriver (not provided). Insert hardware part C
using a small mallet (not provided). Insert hardware part D using a small mallet (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
D
C
B
A
36
1
5 x2pcs
9
4
6 x2pcs 3
7 x2pcs
8 x2pcs
B
B
B
B
B
B
B
B
B
B
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
C
C
C
C
B
B
B
B
B
B
B
B
A
A
A
A
A
A
C
CC
C
C
C
C
C
2 x2pcs C
C
B
B
B
B
B
B
Vendor: S000398
D

Page 4 of 6
Attach the Left Front & Right Back Post Panel (7) and Right Front & Left Back Post Panel (8) to Top Front
& Top Back Post Panel (5) and Bottom Front & Bottom Back Post Panel (6) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
2
3Attach the Plinth Panel (4) to Bottom Panel (3) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
B
A
C
A
B
3
4
5
6
8
7
x 2 SETS
Vendor: S000398

Page 5 of 6
4
5
Attach the Left Panel & Right Panel (2) to Bottom Panel (3) and Bottom Support Panel (4) and Top
Support Panel (9) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
B
A
C
3
9
2
2
4
2
2
5
6
7
8
5
6
7
8
Attach the Bottom Front & Bottom Back Post Panel (6) and Left Front & Right Back Post Panel (7) and
Right Front & Left Back Post Panel (8) to Left Panel & Right Panel (2) and Bottom Panel (3) by screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
3
Vendor: S000398

Page 6 of 6
6
B
A
C
1
2
2
5
5
Attach the Top Panel (1) to Left Panel & Right Panel (2) and Top Front & Top Back Post Panel (5) and
Top Support Panel (9) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
9
.Additional Information:
.For complete product information, images and dimension diagrams please visit the website www.birlea.com
.If you have any issues with your item please contact the retailer directly you purchased it from who will be able to resolve any
issues with Birlea.
.Why don't you send us photos of your assembled furniture to [email protected] to be shared in our #birleahome feature on
lnstagram.
Vendor: S000398