Bissell POWERFRESH 2075 series User manual

Quick Start Usage Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
POWERFRESH®
SLIM STEAM MOP
QUICK START GUIDE 2075 SERIES
161-2081 05/17 RevF
1. Locate the clean water
tank on the front of
the Handheld Pod and
fill it with distilled or
demineralized water
using the water cup.
2. Insert the Extension
Wand into the Mop Pad
Foot until you hear a
click. Then, insert the
Handheld Pod into the
top of the Extension
Wand until you hear it
click into place.
3. Plug machine in and wait
until the STEAM READY
light turns to a solid light.
This could take up to a
minute for it to be ready
for use.
Press PAUSE when you
want to stop the machine
from steaming.
NOTE: Upon first use of
the steam mop or first
use after refilling the
water tank, the pump may
make a “knocking” sound,
indicating it is priming the
machine.
4. Depending on cleaning
needs, select HI STEAM
or LOW STEAM.
HI STEAM is for cleaning
durable floors or sticky
messes.
LOW STEAM is for
delicate floors or for
light, everyday cleaning.
Press PAUSE when you
want to stop the machine
from steaming.
5. Step on the side of
the foot to recline the
body of the machine.
Then, push the trigger
underneath the handle
of the Handheld Pod to
release steam and begin
cleaning.
click
PAUSE
HI Steam
LOW Steam
PAUSE
HI STEAM
LOW STEAM
WARNING
End of Extension Wand and end of Handheld Pod will still be hot after pressing
the PAUSE button. Before changing from mopping to the handheld feature or
disconnecting a tool from the handheld pod or extension wand, make certain
steam is no longer coming from the nozzle or wait until cool before removing.

Tips & Tricks
›› Be sure to vacuum or sweep before using
your steam mop.
›› Conveniently store your PowerFresh Slim
Steam Mop and accessories with the
included wall mount and tool box.
›› If the steam seems reduced, make sure
there is enough water in the tank. If not,
refill the water tank.
›› All tools can be attached to the end of the
Extension Wand or the Handheld Pod.
›› For overly challenging and stuck-on
messes on hard floors, use the scrubby
pad and slowly and evenly stroke your
steam mop back and forth at least three
times over the area using continuous
steam.
›› For best results, wash mop pads after
each use.
Getting the Best Clean from Your PowerFresh® Slim Steam
USE THE EXTENSION WAND
QUICK START GUIDE For further instructions
reference the User Guide or visit
www.BISSELL.com
To clean hard to reach areas in your home such
as baseboards, ceilings, sliding door tracks, etc
use the Extension Wand. To use, step down
on the pedal located on the back of the steam
mop to release from the foot. Push the trigger
underneath the handle to release steam.
Multi-Surface Cleaning
USE THE HANDHELD POD
To clean surfaces above your floors such as
countertops, sinks, showers, etc use the Handheld
Pod. To use, push the release button located on
top of the Extension Wand and lift up to detach.
Push trigger to release steam. The mop pad foot
can also be attached to the Handheld Pod.
USE SWIVEL STEERING
To clean tight spaces such as baseboards,
behind the toilet and around furniture, take
advantage of the swivel steering on your
PowerFresh Slim Steam Mop.
Hard to Reach Cleaning
Attach the tool box to the Handheld Pod by aligning the clip on
the backside of the Tool Box to the opening on the bottom of the
Handheld Pod and slide down into place.
Carry Tools On The Go