1
Black Box Corporation
• 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 72 -7 6-5500 • www.blackbox.com • e-mail:
[email protected]Dual-Function Tester
checks USOC cable
and phone outlets.
Three-Function Tester
checks cables—and
gives you breakout-
box and patch-panel
capabilities.
oth models include
dual eight-position
modular sockets.
Y
our wiring system is the
backbone of your network.
So you need a reliable tester.
Or two. That’s why we offer
these Modular Testers.
Choose the Dual-Function
Modular Tester when both ends
of a cable can be plugged into the
Tester. It’s designed for modular
wiring systems that conform to
Universal Service Order Code
(USOC) standards. The unit
PHONE OUTLET TESTER
USE PIGTAIL TO TEST RJ11 OUTLETS
CORRECT WIRING
WIRING REVERSED
NOT OPERATIONAL
CENTER PAIR SECOND PAIR
(LINE 1) (LINE 2)
MODULAR CABLE TESTER
USE SOCKETS TO TEST RJ11 & RJ45 CABLES
PAIR IS CROSSED WIRED (TELEPHONE)
PAIR IS STRAIGHT THRU (DATA)
PAIR IS NOT WIRED
CENTER PAIR
SECOND PAIR
THIRD PAIR
FOURTH PAIR
PIN# CROSSED WIRED STRAIGHT THRU PIN# PAIR#
1
2
4
5
6
7
8
1
2
4
5
6
7
8
1 2 4
BAT GND
LED
POS V
BAT +9V
Bounceback
Enab
1
2
4
1
2
4
5
6
1
2
4
5
6
7
8
1
2
4
1
2
4
5
6
1
2
4
5
6
7
8
1 . . . 4 1 . . . . 6 1 . . . . . . 8
These easy-to-use testers make sure
your premise and modular wiring
meets specifications.
KeyFeatures
MODULARTESTERS
2/28/2003 #1 869
Ordering Information
ITEM CODE
Modular Testers
Dual-Function ...........................................................TS110A
Three-Function .....................................................TS1 0-R2
Bounce-Back Unit......................................................TS116
includes a 6-position modular
pigtail that tests phone outlets
for polarity and connection to a
central office. Up to two lines
are displayed.
Team the Three-Function
Modular Tester with a Bounce-
Back Unit (TS116) and test the
continuity of cable that’s already
installed. This Tester works with
all types of modular cables
regardless of wiring
configuration. In addition, you can
use the tester as a breakout box,
thanks to 16 gold-plated posts
that give you access to connector
leads. Because the tester fea-
tures individual switches and
jumpers, it can also function as
a patch panel.
Both models include LEDs and
a sturdy, scratch-resistant Lexan
faceplate.
CE Approval: TS110A, TS1 0-R2,
TS116
Connectors: (2) RJ- 5
Indicators: TS110A: (8) for modular
cable testing, ( ) for phone
outlet testing;
TS1 0-R2: (17) LEDs: (8) for each
port, (1) spare
Power: (1) 9-volt battery (included)
Size: 5"H x "W x 2"D
(12.7 x 10.2 x 5.1 cm)
Weight: TS110A: 0.5 lb. (0.2 kg);
TS1 0-R2: 0.8 lb. (0. kg)
Specifications
© 2003. All rights reserved.
Black Box Corporation.
