Black Box TS610A User manual

1
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 72 -7 6-5500 • www.blackbox.com • e-mail: [email protected]
Detects signal and
ground pins for baluns
with an RJ-11 or RJ-45
connector.
Tests BNC or twin-
a ial baluns.
Includes a low-battery
indicator and battery
self-test LED.
O
ne wrong balun and your entire
system won’t work. But with
the Balun Tester Kit, you can test
baluns on-site in a matter of
seconds—compared to hours of
frustration through trial and error.
You can use this tester kit with
most popular types of baluns,
With the Balun Tester Kit, you
won’t have to guess which pin is
signal and which pin is ground.
KeyFeatures
BALUNTESTERKIT
7/26/2005 #12685
Ordering Information
ITEM CODE
Balun Tester Kit............................................................TS610A
including those with RJ-11 or
RJ- 5 pins. The tester tells you
which pin is signal and which is
ground. It includes a BNC/twin-
axial connector adapter for test-
ing both BNC (IBM®3270) and
twinaxial (IBM 3X, AS/ 00®)
baluns (with or without a pigtail).
The tester also includes six
LEDs, one for each pair of active
pins, one for polarity, and one for
low battery or battery self-test.
The device’s compact and
lightweight design makes it
convenient to use on any job site.
Switch: SW 1: Balun tester;
SW 2: Reserved;
SW 3: Self-test
Connectors: Tester: (1) BNC female,
(1) RJ- 5;
BNC/twinaxial connector
adapter: (1) BNC male to female
twinaxial
Indicators: (6) LEDs: ( ) Signal
Ground/Ground Signal Active
(Pins 1-2, 3-6, -5, 7-8), (1) Polarity
On/Off, (1) Battery Self-Test
On/Off/Low Battery
Power: ( ) 1.5-volt AA batteries
Size: 6"H x 2.5"W x 0.9"D
(15.2 x 6. x 2.3 cm)
Weight: 1.5 lb. (0.7 kg)
Specifications
© 2005. All rights reserved.
Black Box Corporation.