Black Box PDUMV24-S15-120V User manual

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [e-mail]
Customer
Support
Information
February 2010
MT1000A-85-R4
BL A C K B OX®
This 15-amp, vertically mounted distribution unit is
60 inches long, features a current meter, and has
24 outlets.
15-Amp Metered Vertical PDU, 24-Outlet (5-15R)
PDUMV24-S15-120V
Overview
The metered PDU LCD display shows the current power draw in amps.
The metered PDU only has one function button, MUTE, located next to
the display. The metered PDU’s alarm sounds when the current draw
reaches 80% of capacity. The alarm can be turned off by pressing the
MUTE button. When the current draw exceeds 90% of the maximum
current rating, the alarm cannot be muted, and the PDU alarms until the
current draw is reduced.
Environmental: Operating Temperature: 32 to 104° F (0 to 40° C);
Storage Temperature: 32 to 149° F (0 to 65° C);
Operating and Storage Humidity: 0 to 90%, noncondensing relative
UL Listed: Yes (UL 60950-1)
RoHS: Yes
Specifications
Circuit Breaker: 15 A
Cord Connector: 5-15P
Cord Length: 6 ft. (1.8 m)
Cord Type: 14/3C
Current Alarm: Yes
Current Rating: 12 amps (UL®60950-1)
Input Voltage: 120 VAC
Metered: Yes, 3-digit LCD
Mounting: Vertical
Number of Outlets: 24
Outlet Location: Front
Outlet Max. Current: 12 A
Outlet Type: 5-15R
Indicator: Power LED

BL A C K BOX®
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
Safety Instructions
1. The PDU is designed for indoor use only in a controlled environment away from excess moisture, temperature extremes,
conductive contaminants, dust, or direct sunlight.
2. Do not connect the PDU to an ungrounded outlet or extension cords or adapters that eliminate the connection to ground.
3. The power requirement for each piece of equipment connected to the PDU must not exceed the individual outlet’s load rating.
4. The total power requirements for equipment connected to the PDU must not exceed the maximum load rating.
5. Do not drill into or attempt to open any part of the PDU. There are no user-serviceable parts inside.
6. Do not attempt to modify the PDU, including input plugs and power cables.
7. To reduce the risk of fire, connect only to a branch circuit with overcurrent protection in accordance with the National Electric
Code, ANSI/NFPA 70(3KVA).
What’s included
• 24-outlet vertical PDU
• (2) mounting brackets
• (4) mounting screws
• Specification sheet
© Copyright 2012. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box®and the Double Diamond logo are registered trademarks of BB Technologies, Inc. UL is a registered
trademark of Underwriters Laboratories. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.
PDUMV24-S15-120V, rev. 1