Blackline Safety Loner Bridge User manual

The Loner Bridge System

CONTENTS
About the devices
Starting your shift
During your shift
Generating Manual Alerts
Ending your shift
Questions?

ABOUT THE DEVICES

Loner 900 Response
Service
95% Loners:1
Sat Cell
OK
Loner Bridge
The Loner Device is the monitor and the Bridge is the communicator.
Cell & Satellit e Blackline Safety
Network
ABOUT THE DEVICE –Loner Bridge & 900
HOW DO LONER BRIDGE & LONER 900
WORK TOGETHER?

95% Loners:1
Sat Cell
OK
Power button
LCD Display
Menu navigation buttons
SureSafe™ indicator light
Battery indicator & charging light
ABOUT THE DEVICE –Loner Bridge
LONER BRIDGE COMPONENTS

ABOUT THE DEVICE –Loner Bridge
Charger connected
Battery level percentage
Number of connected
Loner 900 Devices
Cell network signal strength
Cell network connection
Communication
service indicator
Satellite network
signal strength
Satellite network connection
LCD EXPLAINED

ABOUT THE DEVICE –Loner 900
Belt Clip
Latch
SureSafe monitoring light
and power button
LONER 900 COMPONENTS

STARTING YOUR SHIFT

ALWAYS turn Loner Bridge on
BEFORE turning on Loner 900
95% Loners:1
Sat Cell
OK
ENDING YOUR SHIFT
12

Press the power button
The green SureSafe indicator light
will flash while Loner Bridge
connects to a network and the LCD
will say “Searching…”
Once connected, the SureSafe
monitoring light will be SOLID
GREEN
95% Loners:1
Sat Cell
OK
STARTING YOUR SHIFT
TURNING ON YOUR LONER BRIDGE

95% Loners:1
Sat Cell
OK
95% Loners:1
Sat Cell
OK
Ensure the top of Loner Bridge has a clear view of the sky,
especially if you are outside of cell coverage
If the SureSafe indicator light on Loner Bridge is flashing, the device is
not connected to the Blackline Safety Network and your safety is not
monitored
STARTING YOUR SHIFT

Press the power button
The green SureSafe light will
blink until it is connected to the
Blackline Safety Network.
Once connected, the light will be
SOLID GREEN.
This means your safety is
now monitored.
TURNING ON YOUR LONER 900
STARTING YOUR SHIFT

Clip the device to the side of your hip or to your chest pocket
WEARING YOUR LONER
STARTING YOUR SHIFT

Do not leave Loner unattended when powered on
This can lead to false alerts
STARTING YOUR SHIFT

DURING YOUR SHIFT

During your shift, the device may ask you to confirm
that you are OK when it detects one of the
following:
No-motion Fall detection Check-in
DURING YOUR SHIFT
AUTOMATIC FEATURES

To do this, press and hold the latch for two
vibrations. This will reset the check-in timer
before the automatic alarm sounds.
Your device will automatically check you in
if you are driving over 35 km/h.
00:54:34 2:00:00
Before pre-check in Check-in timer reset
DURING YOUR SHIFT
PRE CHECK-IN

No-motion
Fall Detection
Check-in
DURING YOUR SHIFT
Pending Alarm
If you’re OK press
the confirm button
on the latch
This returns Loner to
normal function.
No notification is
sent.
AUTOMATIC FEATURES –IF YOU’RE OK

No-motion
Fall Detection
Check-in
DURING YOUR SHIFT
Pending Alarm If you can’t press the confirm
button after a certain period of
time, the device will go into high
alarm
This sends an
alert notification
The high alarm can be silenced by
pressing and holding the button. The
alert notification still remains active.
Once an alert is acknowledged
by monitoring personnel, the
loner will display a blue light
AUTOMATIC FEATURES –IF YOU CAN’T
CONFIRM

Emergency alert
(Audible)
Silent alert
During your shift, you may need to request help
using one of the manual features:
DURING YOUR SHIFT
MANUAL FEATURES