BLAUBERG Ventilatoren Wind-G User manual

USER’S MANUAL
Wind-G
Wind-GR
AXIAL FAN
EN

2
EN
CONTENTS
Delivery set............................................................................................................................................................................................................................................. 9
Brief description .................................................................................................................................................................................................................................. 9
Operation guidelines ....................................................................................................................................................................................................................... 9
Product sales ......................................................................................................................................................................................................................................... 9
Designation key................................................................................................................................................................................................................................... 10
Mounting and set-up....................................................................................................................................................................................................................... 10
Connection to power mains ....................................................................................................................................................................................................... 10
Technical maintenance................................................................................................................................................................................................................... 11
Troubleshooting.................................................................................................................................................................................................................................. 12
Storage and transportation regulations............................................................................................................................................................................... 12
Manufacturer’s warranty ................................................................................................................................................................................................................ 13

3
EN
READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.
COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG
SERVICE LIFE OF THE UNIT.
KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT. YOU MAY NEED TO
REREAD THE INFORMATION ON THE PRODUCT SERVICING.
This user’s manual is a main operating document intended for technical, maintenance, and operating staff.
The manual contains information about purpose, technical details, operating principle, design, and installation of the
Wind-G, Wind-GR unit and all its modifications.
Technical and maintenance staff must have theoretical and practical training in the field of ventilation systems and should
be able to work in accordance with workplace safety rules as well as construction norms and standards applicable in the
territory of the country.

4
EN
All user’s manual requirements as well as the provisions of all the
applicable local and national construction, electrical, and technical
norms and standards must be observed when installing and
operating the unit.
Disconnect the unit from the power supply prior to any connection,
servicing, maintenance, and repair operations.
Only qualied electricians with a work permit for electrical
units up to 1000 V are allowed for installation. The present user’s
manual should be carefully read before beginning works.
Check the unit for any visible damage of the impeller, the casing, and
the grille before starting installation. The casing internals must be free
of any foreign objects that can damage the impeller blades.
While mounting the unit, avoid compression of the casing!
Deformation of the casing may result in motor jam and excessive
noise.
FOLLOW THE USER’S MANUAL REQUIREMENTS TO ENSURE DURABLE AND
TROUBLE-FREE OPERATION OF THE UNIT

5
EN
Misuse of the unit and any unauthorised modifications are not
allowed.
Do not expose the unit to adverse atmospheric agents (rain, sun, etc.).
Transported air must not contain any dust or other solid impurities,
sticky substances, or fibrous materials.
Do not use the unit in a hazardous or explosive environment
containing spirits, gasoline, insecticides, etc.
Do not close or block the intake or extract vents in order to ensure the
efficient air flow.
Do not sit on the unit and do not put objects on it.
The information in this user’s manual was correct at the time of the
document’s preparation.
The Company reserves the right to modify the technical
characteristics, design, or configuration of its products at any time in
order to incorporate the latest technological developments.
Never touch the unit with wet or damp hands.
Never touch the unit when barefoot.

6
EN
This unit is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the unit by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with
the unit.

7
EN
Connection to the mains must be made through a disconnecting
device, which is integrated into the fixed wiring system in accordance
with the wiring rules for design of electrical units, and has a contact
separation in all poles that allows for full disconnection under
overvoltage category III conditions.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons in order
to avoid a safety hazard.

8
EN
THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.
DO NOT DISPOSE THE UNIT AS UNSORTED DOMESTIC WASTE.
Ensure that the unit is switched off from the supply mains before
removing the guard.
Precautions must be taken to avoid the back-flow of gases into the
room from the open flue of gas or other fuel-burning appliances.

9
EN
DELIVERY SET
Fan – 1 pc.
Screws and dowels – 4 pcs.
Seal – 1 pc.
User’s manual – 1 pc.
Packing box – 1 pc.
BRIEF DESCRIPTION
The product is an axial fan for exhaust ventilation of small and medium-sized premises.
The unit is an extract fan (Wind-G models) and a supply and extract fan (Wind-GR models) and is designed for wall or window
mounting.
The fans of the Wind-GR series are equipped with a reversible motor for the possibility of combining air supply and air
extraction.
The fan is rated for continuous operation.
The fan has automatically opening shutters driven by a motor-reducer.
The fan design is constantly being improved, thus some models may be slightly different from those described in this
manual.
OPERATION GUIDELINES
The fan is connected to 220...240 V/50 (60) Hz single-phase AC mains and is designed for continuous operation without
disconnection from the electric mains.
Ingress protection rating against access to hazardous parts and water ingress is IPX4.
The fan is rated for operation at ambient temperatures ranging from +1 °C to +40 °C.
The unit is rated as a class I electric appliance.
PRODUCT SALES
The product is sold in specialized and retail trade organizations.

10
EN
DESIGNATION KEY
Wind-G 180
Outlet spigot diameter [mm]
Fan series
MOUNTING AND SET-UP
Prepare a hole D1 in the wall or glass:
• for Wind-G, Wind-GR 180 fans – D1=192–194 mm,
• for Wind-G, Wind-GR 230 fans – D1=250–254 mm.
Insert the fan into the hole and fix it using the clamping plates or screws that fix the fan casing to the wall through the
dowels (Fig. 3). Install the outer fan panel.
CONNECTION TO POWER MAINS
The fan is rated for connection to single-phase AC 220-240 V/50 (60) Hz power mains.
Terminal designations on the wiring diagrams:
L– line L1 – terminal for air supply S– external switch
N– neutral L2 – terminal for air extraction QF – automatic circuit breaker
When using a reversible Wind-GR fan, the air flow direction is reversed.
To connect a fan with a reverse direction, you can use the external switch S shown in Fig. 4, or perform internal wire switching:
- when a phase is applied to terminal L2, the fan operates in the air extraction mode
- when a phase is applied to terminal L1, the fan operates in the air supply mode
The wiring diagram of the Wind-GR fan is shown in Fig. 4.