Blaupunkt BPDW8913WR User manual

When the camera is xed, put the lead-wire of the camera through the car trunk.
Notice
Camera Emitter
In st al la ti on i ns tr uc ti on s fo r th e ca me ra :
In st al la ti on i ns tr uc ti on s fo r th e em it te r:
rear lamp
Notice
Specications
Packing List Installation
Operations for Android system client
Operations for iOS Apple system client
Installation app Software
Settings:
WIF ICA ME RA
Not i n range
.
* When set WIFI signal to connect the mobile phone, please close the WIFI signal
previously opened.
image display time is relate to the CPU memory, software version, working
software number of mobile phone.
* when the background is black or the image is still, please exit the APP, and check
whether the wifi connection is normal then click again the APP icon to enter into
the software interface.
* ,
Notice
Connection WiFi:
WIF ICA ME RA
Sec ured wi th WP2
WIF ICAME RA
1. Turn on the iOS device and enter the App Store
2. Search “Sight Wi” app.
3. Install the Sight Wiapp
Installation app Software
Connection WiFi:
WIF ICAM ERA
View the video:
G
Notice
The specic steps to clear network memory are as follows. and then follow the above WIFI connection
method to reconnect the new network.
Press this icon to enter into the settings menu. You can change the default factory
SSID and password of the wifi camera tool, and clicking will show whether the change
is successful, and clicking to cancel the new SSID set.
Settings:
* When set WIFI signal to connect the mobile phone, please close the WIFI signal
previously opened.
image display time is relate to the CPU memory, software version, working
software number of mobile phone.
* when the background is black
click again the APP icon to enter into
the software interface.
* ,
or the image is still, please exit the APP, and check
whether the wifi connection is normal. then
Notice
WIF ICAME RA
WP2 PS K
Pass word
Secu rity
Conn ect Canc el
4. After adjustment, drill a second hole, then
mount and tighten to nish camera installation
3. Move the camera orientation to adjust the
display eect
2. Use a Screwdriver to ensure that the rst
screw is properly screwed into the drill hole.
1. In the proper position of rear license plate
drill a hole for mounting screws
View the video:
WIFI car rear view
Night Vision Range >3m
Power Supply 12V DC
Video output 0.9 .Vp-p 75Ω ~1 2
Consumption Current 150mA MAX
Image Sensor 1/4inch CMOS
Minimum illumination <5Lux
Electronic Exposure Time 1/60s-12ns(NTSC) sec
1/50s-12.5ns(PAL) sec
Horizontal View Angle
Storage Temperature
Operation Humidity 15%~85%RH
Operation Temperature
Dimensions 370 X 55 X 35MM
Weight 140g
Items GL8912
640×480 pixels
Effective Pixels
Video Format NTSC/PAL
80O
O
-10~ C+50
O
-20~ C+60
WIFI transmitter box
Wireless Protocol
Modulation Mode
Transmission Distance
With No Obstacle
Weight
Operation Voltage 12V DC
Operation Frequency 2400-2483.5MHz
IEEE 802.11b, IEEE 802.11g,
IEEE 802.n (1T1R Modes)
Operation Current 150mA(MAX)
Encryption Mode WPA2
802.11b：DSSS (CCK, DQPSK,
DBPSK)•802.11g/n：OFDM
(BPSK, QPSK, 16QAM, 64QAM)
≥10m
60±5g
Operation Temperature
Dimensions 71 X 35.5 X 12.3MM
Storage Temperature
Operation Humidity 20%~90%RH
Items GT4068
O
-10~ C+50
O
-20~ C+60
Settings Connecting Camera Logo
Settings
BPDW8913WR
2.4GHz Digtal Wireless
Car Rearview System
Open the APP, if the connection between the witool and the mobile device is
successful the app will be highlighted. Then the image would be transmitted from the
camera to the app. As shown in the gure below, the camera is showning real-time
monitoring in the app. The user would also be able to press icon to refresh the image
Open the APP, if the connection between the witool and the mobile device is
successful the app will be highlighted. Then the image would be transmitted from the
camera to the app. As shown in the gure below, the camera is showning real-time
monitoring in the app. The user would also be able to press icon to refresh the image
2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device
is “WIFICAMERA”. Then type in the password of the devices
(Default password: 88888888).
1. Click on the “ ”icon.
Wi-Fi
2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device
is “WIFICAMERA”. Then type in the password of the devices
(Default password: 88888888).
1. Click on the “ ” icon in the main interface of the iOS device.
* Never reverse the positive and negative pole. Reversing the poles
can damage the emitter box and camera, rendering them unusable.
* The positive and negative pole of the emitter box’s power cable are connected
to the positive and negative pole of the rear lamp of the car.
* The antenna of the emitter box should not be placed near any metal part of the car.
This can negatively eect the emitting distance and image transmission.
1. Turn on the Andriod Phone and enter the Google Play Store
2. Search “Sight Wi” app.
3. Install the “Sight Wi” app
Wi-Fi
* User could press the RESET button of the emitter to renew the default factory
SSID and password.
* When the user changes the SSID and password, the user shall forget the network in the
"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.
Press this icon to enter into the settings menu you can change the default factory SSID
and password of the wifi camera tool, and clicking will show whether the change is successful,
and clicking to cancel the new SSID set.
* User could press the RESET button of the emitter to renew the default factory
SSID and password.
* When the user changes the SSID and password, the user shall forget the network in the
"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.
Connecting
Camera
Take a
Photo
Record
a Video
Video
Playback
* All the specications are subject to minor change without prior notice
License Plate
Nuts & Bolts
License Plate
Screws (Optional)
In-line Wire
Connectors
Grommet Cable Ties
Black-
Red+
The specic steps to clear network memory are as follows. and then follow the above WIFI connection
method to reconnect the new network.