Blaupunkt PALM BEACH 550 User manual

CAR MULTIMEDIA
PALM BEACH 550

Reset button
Access only with open cover
Restore to default factory settings of the device.
Caution! All personal settings will be lost!
USB socket - Front
Access only with open cover
AV-IN 1 socket
Access only with open cover
Touchscreen user interface
DVD/CD drive
Infrared receiver for remote control
Microphone
Next page
HOME key
Short press: Return to home page at any point
Long press: Display analog clock
NAVI shortcut key
Go to Navigation
DISPLAY button
Short press: Adjust the display brightness (4steps)
Long press: Switch off the display
button (Eject)
Eject a DVD/CD
Rotary/pushbutton
Short press: Switch on device
In operation: Mute audio source
Long press: Switch off device
Turn: Adjust volume
Navigation SD Card Slot
Media SD Card Slot
Access only with open cover
The card reader supports microSD cards on which
audio/video les can be stored.
15
14
13
Page 1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

Page 2
16
18
19
20
USB: Rear Access
AV-IN 2 Rear Access
Rear Camera input: Short cut key
SWC: Steering Wheel Control: Short Cut key
Blackout: turn off display short cut key
16
17
18
19
20
17

1
2
2
3
4
3
4
5
6
5
6
7
8
9
10
11
7
8
9
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
11
12
13
14
15
16
17
18
19
20
21
22
27
28
29
30
31
32
33
34
23
24
25
26
27
28
29
30
31
32
33
34
1

Safety notes 6
Symbols used 6
Road safety 6
General safety notes 6
Declaration of conformity 6
Cleaning notes 6
Disposal notes 6
Scope of delivery 7
Placing the device in operation 7
Switching on/off 7
Volume 7
Main menu 7
Setting the reception area 7
Radio mode 8
Start radio mode 8
Select memory bank 8
Tuning into a station 8
Storing stations manually 8
Storing stations automatically (Travelstore) 8
Scanning stations 8
Switching RDS on/off 8
Switching the REG function
(regional programmes) on/off 9
Switching the AF (alternative frequencies)
function on/off 9
Adjusting the seek tuning sensitivity 9
Selecting the programme type and starting
seek tuning 9
DVD/CD/USB/microSDHC media playback 10
Basic information 10
DVD/CD mode 10
USB data carrier 10
microSDHC cards 10
DVD movie playback 11
Audio playback from DVD/CD, USB or microSDHC 11
Video playback from DVD/CD, USB or microSDHC 12
Image playback from DVD/CD, USB or audioSDHC 13
Bluetooth mode 14
Starting Bluetooth mode 14
Registering Bluetooth devices 14
Telephone mode - Bluetooth 14
Audio playback - Bluetooth 15
Bluetooth settings 15
External audio/video sources 16
AV-IN socket 16
Video input 16
External monitor 16
Sound settings 16
Audio distribution (fader/balance) 16
Equalizer 17
Basic setting 17
General 17
Video 18
Sound 18
Time 18
Language 18
Bluetooth 18
Volume 18
Camera 18
Phone Link 18
Instruction on Phone Link 19
Useful information 20
Warranty 20
Service 20
Connection diagram 21
Appendix 22
DISC / USB Supporting Files 23

11

12

13

15
Artist Name
Title Name
Album Name

1. Go to Settings 2. About Phone 3. Build Number
Please follow the below instructions to turn on debugging on your phone.
Some steps may be different on different phones please also refer to your mobile phone instruction manual.
4. Tap on Build no for
6 to 8 times
5 & 6. You will now see Developer mode activated
under Developer Option
After the above connect the USB cable to radio & mobile
7. Turn on Developer
Option
9. USB debugging is
now ON
8. Switch on USB Debugging,
Say OK to the message
19

Service
If your device should need service, you can nd
information about service partners in your country
under www.blaupunkt.com
OR
Email: Suppor[email protected]
OR
Call 1800 209 6820 for the location of an authorized
service center near you.
Useful information
Warranty
We provide manufacturer's warranty for products
bought within the India. For devices purchased
outside the India, the warranty terms issued by our
respective responsible domestic agency are valid. The
warranty terms can be looked up at
www.blaupunkt.com.
Register ONLINE within 15 days of PURCHASE to
activate WARRANTY.
The procedure to activate the warranty is given below;
20
Thank you for buying Blaupunkt
Thank You!!
Please activate the e-warranty within 15 days of purchase.
To activate your e-warranty, please follow the below steps:
Should you require further assistance,
please call: Customer Support 1800 209 6820
Step 3. Complete a simple form to register
your product & activate e-warranty.
Step 1. Please send SMS
SERIAL <space> <serial number> to 07760962759
Step 2. In response to the sent SMS, you should
receive back a link via SMS, please Click on it
E-user manual is available at www.blaupunkt.com
or upon completion of registration, follow
the link at the bottom on the page to download.
Serial No.:
BP76103550000001
Model: Palm Beach 550