BluDot Lid Storage Bed LI1-KSTORG-SD User manual

Lid Storage Bed Collection
DESIGNED IN 2017
ASSEMBLY NOTES | REV 04
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
COPING MECHANISM.
Sleep well knowing that you are on top of your storage. Literally. The Lid Storage
bed provides an inconspicuous spot for whatever needs to be stashed below.

1 | 844.425.8368 LID STORAGE BED COLLECTION
Mattress Bracket
2QTY
Handle
1QTY
Foot
QTY 4
Pt. 4009
8QTY
Pt. 2004
20QTY
Pt. 1098
12QTY
Pt. 1099
8QTY
Pt. 1106
40QTY
Pt. 1100
QTY 4
Pt. 3005
12QTY
Pt. 4007
4QTY
Pt. 3007
QTY 84
Pt. 8049
8QTY
Pt. 9028
1QTY
Pt. 9022
QTY 1
M8 x 35mm M8 x 45mm M8 x 75mm M8 x 25mm
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
Headboard
1*QTY
Left Side Rail
1QTY
Footboard
1*QTY
Right Side Rail
1QTY
Mattress Frame
2QTY
Support Panel
2QTY
Dust Barrier
1QTY
Lift Mechanism
2QTY
Slip Cover
1QTY
Cross Support
2QTY
* Platform storage bed ships with x2 footboards.
Parts & Hardware

3 | 844.425.8368 LID STORAGE BED COLLECTION
PT. 4007 x 4PT. 1106 x 8PT. 3007 x 8PT. 9022 x 1
Step 01
ATTACHING THE FEET.
Begin by attaching the round adhesive pads
to the feet. Attach the feet to the side rails as
shown using the provided hardware.

[e-mail] |4ASSEMBLY NOTES
PT. 1106 x 4PT. 3007 x 4PT. 9022 x 1
Horizontal
holes closer
to footboard
Vertical holes
closer to
headboard
Step 02
ATTACHING THE FOOTBOARD.
Attach the footboard to the side rails using
the provided hardware as shown. Note hole
location to help identify left vs. right side rails.

5 | 844.425.8368 LID STORAGE BED COLLECTION
PT. 1106 x 4PT. 3007 x 4PT. 9022 x 1
* Platform storage bed ships with two footboards.
Attachment points are the same as shown.
*
Step 03
ATTACHING THE HEADBOARD.
With the help of a second person, align the
headboard bolt holes with the foot bracket
holes. Attach as shown using the provided
hardware.

[e-mail] |6ASSEMBLY NOTES
PT. 4009 x 8PT. 1106 x 16 PT. 3007 x 16 PT. 8049 x 8PT. 9022 x 1
Step 04
ATTACHING THE FRAME BRACKETS.
Begin by installing the adhesive pads to the
top of the frame brackets. Locate the pairs of
horizontal holes on the inner face of the frame.
Attach the frame brackets as shown using the
provided hardware.

7 | 844.425.8368 LID STORAGE BED COLLECTION
Step 05
INSTALLING THE FABRIC COVERS.
Begin attaching the slip cover at the inner
footboard corners and work up to the
headboard. Wrap the slip cover around the
frame and attach at the bottom using the
velco strips. Pull the dust barrier to the
frame sides and attach the velcro strips.

[e-mail] |8ASSEMBLY NOTES
PT. 9028 x 1
Step 06
ATTACHING THE LIFT PISTONS.
Remove the x2 pre-attached lock nuts.
Rotate the lift pistons and place over the
threaded posts on the frame. Secure using the
provided hardware. Repeat for remaining lift
mechanism.

9 | 844.425.8368 LID STORAGE BED COLLECTION
PT. 1098 x 12 PT. 3005 x 12 PT. 3007 x 12 PT. 9022 x 1
Step 07
ATTACHING THE LIFT MECHANISMS.
Align the support panels and the lift
mechanisms with the side frame holes. Attach
as shown using the provided hardware.

[e-mail] |10ASSEMBLY NOTES
PT. 1106 x 8PT. 2004 x 8 PT. 3007 x 16 PT. 9022 x 1PT. 9028 x 1
Step 08
ATTACHING THE CROSS SUPPORTS.
With the help of a second person, align the
cross supports with the pre-drilled holes on
the lift mechanisms. Attach using the provided
hardware as shown.

11 | 844.425.8368 LID STORAGE BED COLLECTION
PT. 1100 x 4PT. 2004 x 4PT. 3007 x 8PT. 9022 x 1PT. 9028 x 1
Step 09
ASSEMBLING THE MATTRESS FRAME.
Align mattress frames with wood slats on
the floor as shown. Attach using the provided
hardware as shown.

[e-mail] |12ASSEMBLY NOTES
PT. 1099 x 8PT. 2004 x 8 PT. 3007 x 16 PT. 9022 x 1PT. 9028 x 1
Mattress Bracket Handle
Step 10
ATTACHING THE MATTRESS FRAME.
With the help of a second person, align the
mattress frame with the pre-drilled holes on
the lift mechanisms. Attach using the provided
hardware as shown.
NOTE:Wood slats should be facing up.
After attaching the mattress frame be
sure to attach the mattress brackets
and fabric handle.

13 | 844.425.8368 LID STORAGE BED COLLECTION
Lowering Lift Mechanism
IMPORTANT
Before using the lift mechanism ensure storage area, bed frame, and
surrounding area are free of pets or small children. Never put your
hands on the sides or bottom of the lift mechanism when in use.
STEP 1
Begin by standing at the side of the bed. Pull the handle up and towards the headboard. While doing so
push down and toward the headboard with your other hand.
STEP 2
The lift mechanism will support itself in this position with most mattresses. When ready to fully lower
mattress ensure storage area, bed frame, and surrounding area are free of pets or small children.
Stand at the side of the bed and push down and towards the footboard with both hands.

[e-mail] |14ASSEMBLY NOTES
Raising Lift Mechanism
IMPORTANT
Before using the lift mechanism ensure storage area, bed frame, and
surrounding area are free of pets or small children. Never put your
hands on the sides or bottom of the lift mechanism when in use.
STEP 1
Begin by standing at the foot of the bed. Pull the handle up and towards the headboard. While doing so
place other hand on top of frame to slow lift movement if desired. Do not place head or body in path of
lift mechamism during use.
STEP 2
The lift mechanism will support itself in this position with most mattresses. This is ideal for storing or
retrieving items from the storage area. Refer to Pg.12 on how to lower mattress from this position. The
lift mechanism can also extend further, to do so pull the handle up and towards the footboard.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Vacuum your upholstery regularly. For leather furniture dust
regularly with a dry cloth.
SPILLS
Act quickly with spills. Absorb the spill with a clean white cloth
or paper towel. Never rub the surface. Do not use water or other
liquids to clean, as they may cause stains. Consult a commercial
cleaning specialist for removal of stubborn stains.
AVOID
Keep furniture out of direct sunlight and away from heat sources;
excessive exposure to sunlight may cause color fading. Avoid
placing heavy or sharp objects on the furniture surface for long
periods of time; this can cause permanent surface indentations.
For snags in the fabric, tuck loose threads into fabric or carefully
push to reverse side. Never pull out or cut off loose threads.