BluDot Hall Pass Wall Shelf With Hooks Quick start guide

Hall Pass Wall Shelf With Hooks
DESIGNED IN 2020
ASSEMBLY NOTES | REV 00
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

1 | 844.425.8368 HALL PASS WALL SHELF WITH HOOKS
Pt. 8052
Threaded Standoff
Wall Shelf With Hooks
Pt. 1226
Cap
2
2
1
2
2
QTY
QTY
QTY
QTY
QTY
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
Pt. 8052 x 2*
Step 01
MARK MOUNTING LOCATION
We recommend having a second person
assist with product assembly.
Wall anchors and fasteners are included
for installation. Please consult your local
hardware professional to determine the
hardware best suited for your wall type.
Position the wall shelf in the desired
location and use a leveling device to ensure
that the shelf is horizontal. Mark the
mounting locations as shown.
If the mounting location is not positioned
on a stud, drill a 5/16” hole in the marked
location and insert wall anchor. If the
mounting location is located on a stud, this
step of installin an anchor may be skipped.
Instead, drill a 1/8” pilot hole in the marked
position.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Pt. 1226 x 2
Flat surface on
threaded standoff
facing the back
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulated
for painted metal furniture. Wipe completely dry with a soft cloth.
Step 02
ATTACH SHELF TO WALL
Align shelf with the mounting
locations from the previous step.
Ensure that the threaded standoff
is located in the correct orientation
and location as shown. Use the
provided hardware to secure the shelf
to the wall. Complete assembly by
threading the cap onto the threaded
standoff as shown.