BluDot Circula Dining Table Quick start guide

Circula Dining Collection
DESIGNED IN 2020
ASSEMBLY NOTES | REV 00
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

2 | 844.425.8368 CIRCULA DINING COLLECTION
Base
1QTY
Top Panel
1QTY
Pt. 1079
5QTY
Pt. 3002
5QTY
Pt. 9016
QTY 1
Parts & Hardware

[e-mail] |3ASSEMBLY NOTES
centering pin
alignment pin
Step 01
ALIGNING THE TOP PANEL
Place the base as shown. With a second
person, lift the top panel and center on the
base using the pre-attached centering pin.
Rotate the top panel until the alignment pin
drops into place.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
PT. 1079 x 5PT. 3002 x 5PT. 9016 x 1
Step 02
SECURING THE TOP PANEL
Use the provided hardware to secure the top
panel to the base as shown.
NOTE
Do not use abrasive cleaners on painted metal as it may affect the surface finish.
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulated for
metal furniture. Wipe completely dry with a soft cloth.
MAINTAIN
Cover table during periods of non-use. Store table indoors during winter months.
Use the pre-attached adjustable feet
to level the table prior to first use.