BluDot Chicago 3 Box Quick start guide

Chicago 3 Box
DESIGNED IN 1997
ASSEMBLY NOTES | REV 00
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
COMPELLING NEGATIVE SPACE - LIKE A GAP TOOTH.
Sometimes, good design is about what’s not there. The Chicago series
takes advantage of negative space, creating smart, elegant storage.

1 | 844.425.8368 CHICAGO 3 BOX
Upright
4QTY
Pt. 1001
24QTY
Pt. 5001
24QTY
Pt. 5005
24QTY
Pt. 5002
QTY 24
Pt. 8001
12QTY
Pt. 8002
4QTY
8041
Anti-tip Bracket
Pt. 8041
2QTY
Pt. 1217
QTY 2
Top panel
6QTY
Side panel
6QTY
Back panel
3QTY
Pt. 1218
2QTY
8042
Anti-tip Strap
Pt. 8042
1QTY
Parts & Hardware

[e-mail] | 2ASSEMBLY NOTES
354
1 2
How to use the cam lock system
Note direction of cam arrow. Turn cam clockwise 1/2 turn or until tight. Note direction of cam arrow.

3 | 844.425.8368 CHICAGO 3 BOX
PT. 5001 x 12 PT. 5002 x 12 PT. 5005 x 12
Step 01
ATTACH THE SIDE PANELS (X3).
Attach the side panels to the top panel. See
page 2 for how to use the cam lock system.
Step 02
INSERT THE BACK PANEL (X3).
Slide the back panel between
the side panel grooves.

[e-mail] | 4ASSEMBLY NOTES
PT. 5001 x 12 PT. 5002 x 12 PT. 5005 x 12
Step 03
ATTACH THE TOP PANEL (X3).
Attach the top panel to the side panels. See
page 2 for how to use the cam lock system.

5 | 844.425.8368 CHICAGO 3 BOX
PT. 8002 x 4PT. 8001 x 4PT. 1001 x 8
Step 04
INSTALL THE STANDOFFS (X4).
Push the cap into the top of the upright. Slide
the standoff through the bottom hole and
secure with bolts.

[e-mail] | 6ASSEMBLY NOTES
Step 06
LEVEL THE UPRIGHTS.
Turn the adjustable glides to level the case.
Step 05
INSTALL UPRIGHTS.
Slide uprights one at a time through the holes
in the assembled box. After the legs have been
installed, have a second person help lift and
bring the case upright.

7 | 844.425.8368 CHICAGO 3 BOX
PT. 8001 x 4
PT. 8001 x 4
PT. 1001 x 8
PT. 1001 x 8
Step 07
INSTALL THE SECOND BOX.
Slide the standoff through the
middle hole and secure with bolts
(x4). Slide the box assembly over
the uprights.
Step 08
INSTALL THE LAST BOX.
Slide the standoff through the top
hole and secure with bolts (x4).
Slide the box assembly over the
uprights.

[e-mail] | 8ASSEMBLY NOTES
8041
Anti-tip Bracket
PT. 8041 x 1PT. 1218 x 2
Step 09
ATTACH ANTI-TIP BRACKET TO THE WALL.
Install anti-tip bracket to wall stud 1-inch
below case top panel height.
1” lower than
case top
Side Panel
Wall

CHICAGO 3-BOX9 | 844.425.8368
Back
Panel
Top
8041
Anti-tip Bracket
PT. 8041 x 1PT. 1217 x 2
Step 10
INSTALL ANTI-TIP BRACKET TO CASE.
Bracket must be installed to top panel
of case.In order to prevent damage, it is
recommended that 3/32” pilot holes be
drilled prior to installation.
Rear of Case

[e-mail] |10ASSEMBLY NOTES
8042
Anti-tip Strap
PT. 8042 x 1
Step 11
SECURE THE CASE.
Install and tighten the strap
prior to using the product.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt
and fingerprints, use a quality cleaner formulate for
wood furniture. Wipe completely dry with a soft cloth
in the direction of the wood grain.