BluDot Candid Wall Shelf with Hooks User manual

Candid Wall Shelf with Hooks
DESIGNED IN 2020
ASSEMBLY NOTES | REV 01
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

1 | 844.425.8368 CANDID WALL SHELF WITH HOOKS
Pt. 1404Pt. 8036
Wall Shelf
22
1
QTYQTY
QTY
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
Pt. 1404 x 2Pt. 8036 x 2*
16”
3/16”
( 5 mm )
Step 01
INSTALL WALL SCREWS
Wall anchors and fasteners are included
for installation. Please consult your local
hardware professional to determine the
hardware best suited for your wall type.
Mark the mounting locations spaced 16”
apart, using a level to ensure that they are
horizontal.
If the mounting location is not positioned on a
stud, drill a 15/64” hole in the marked location
and insert wall anchor. If the mounting location
is located on a stud, this step of installing an
anchor may be skipped. Instead, drill a 1/8”
pilot hole in the marked position.
Attach wall screws, leaving space between the
screw head and the wall as shown.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulated
for glass and wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.
Step 02
PLACE SHELF ON WALL SCREWS
Position the shelf onto the installed wall
screws as shown. Adjust wall screws as
necessary to ensure a tight fit.