Blue Tiger Deluxe User manual

- 1 - | P a g e
Blue Tiger Deluxe User Manual
America’s leading Bluetooth headset for the most
demanding environments.
BT Deluxe
Customer Support
1 [phone]

- 2 - | P a g e
Overview
Thank for purchasing a Blue Tiger Deluxe Bluetooth
headset. Please double check the contents of your
package to verify that you have received all of the
included items. Please read the user guide in its
entirety before operating your headset. Your Blue
Tiger headset can be connected/paired with any
device that is Bluetooth wireless technology
enabled.
Getting Started
Please fully charge your new headset before
attempting to pair your headset for the first time.
Your headset should be charged for a minimum of
four hours and no more than eight hours to achieve
a full charge and avoid over charging.

- 3 - | P a g e
General Functions
Turning On:
Press and hold the “Answer” button for 5 seconds until the
indicator light flashes blue 3 times.
NOTE: For the first 5 cycles of turning on the headset, the
headset will beep twice, flash blue 5 times, and then two more
times.
Turning Off:
Press and hold the “Answer” button for 5 seconds. The headset
will beep three times and then the indicator light will flash red
three times.
Voice Dialing:
Press and hold the “Answer” button for about one second. Your
phone should then activate its voice dialing function. This
process may vary slightly based on your particular phone model.
Redialing:
Press the “Answer” button twice quickly.
Answering/Ending a Call:
Press the “Answer” button once.
Rejecting a Call
Press and hold the “Answer” button for 2-3 seconds when call is
coming in.

- 4 - | P a g e
Mute On/Off:
Press and hold the Volume (-) and Volume (+) buttons for 2-3
seconds.
Play/Pause Music
Press the “Answer”button.
Play Previous Song
Press and hold the Volume (+) button for 2-3 seconds.
Next Song (Skip Track)
Press and hold the Volume (-) button for 2-3 seconds.
*Some functions may or may not work with certain phone models. See your phone’s manual for
more information.
Pairing the Headset:
Before your headset can be used with your phone, it must first be
connected, or paired, to your phone. This process should only
need to be completed one time with each new device.
Pairing to your device:
1. Making sure that your Blue Tiger headset is in the "Off"
position (no light flashing on the side of the headset), press and
hold the multi-function button for about 10 seconds, until the LED
light begins alternating between red and blue flashes. The multi-
function button is the button located where the microphone arm
connects to the headphone. This will place the headset into
"pairing mode" allowing it to connect with another Bluetooth
device.
2. On your phone or other Bluetooth device, go to your Bluetooth
menu (sometimes located under Settings, Wireless, Connectivity,

- 5 - | P a g e
or another submenu), and select "Add New" or "Search for New
Devices." With your Blue Tiger in pairing mode, your phone or
other Bluetooth device should locate your headset.
3. On your phone or other Bluetooth device, select your headset
on the list. Your device may ask for a passcode. If so, input
"0000."
4. On your phone or other Bluetooth device, select "Connect" or
"Automatically Connect."
Pairing to a computer or other device:
1. Place your headset in pairing mode by holding down the power
button for about eight seconds until the LED light flashes blue and
red.
2. Use your computer or other device to search for and add a new
Bluetooth device. (Consult the documentation that came with
your Bluetooth enabled device for instructions on this step. For
Windows devices, try support.microsoft.com for additional
information.)
3. Make sure that your Bluetooth device is set to transmit audio
via Bluetooth.
Because Bluetooth devices vary so widely in their operation, we
do not provide extensive support these connections.If needed,
our customer service department will attempt to assist you in
finding support for your device.

- 6 - | P a g e
Bluetooth Tips
Most Bluetooth headsets, including Blue Tiger headsets, have a
range of about 10 meters (about 30 feet). However, there are
factors that can increase or decrease your range and signal
strength.
Like most radio transmissions, line of sight plays an important
role. If your headset has a clear line of sight to your phone, you
may be able to go beyond the 30 meter mark. On the other hand,
if you do not have good line of sight or have something like a wall
between the headset and phone, you may only get a few feet of
range.
Additionally, other factors may interfere with Bluetooth signal
transmission. Other devices emitting radio waves, minor non-
harmful radiation from every day electronic devices, or even the
magnetic field around one's body may at times cause
interference. The best way to avoid this is to remove your phone
or other Bluetooth device from contact or close proximity to the
source of the interference.
Additional Support
If you have any other questions, please contact our Customer
Service department at 1-800-935-1165, see our website at
www.bluetigerusa.com, or send us an email at
[e-mail].

- 7 - | P a g e
Troubleshooting
*Ensure that your headset has enough power, is turned on, and
has been successfully paired with your device. (Follow the pairing
instructions located in this manual)
*Ensure that you have enabled your Bluetooth function on your
phone or device.
*Be sure that you are within 10 meters (about 30 feet) of your
phone or Bluetooth enabled device with good line of sight and
with no other electromagnetic interferences obstructing your
wireless link.
*If the indicator light on your headset is flashing red, your battery
is running low.
*If indicator light goes off during charging, do not be alarmed,
headset is still receiving a charge.
Headset Storage
*Only use included accessories with your Blue Tiger Deluxe.
Using unauthorized chargers could damage your battery.
*Store headset away from dust, heat, and water.
*Do not store headset or charges in extreme environments.