Blue Tiger Elite Plus Ultimate User manual

1
User Manual
Elite Plus Ultimate

2
1. Product Overview
Packing list
A. Elite Plus Ultimate bluetooth headset 1pcs
B. Tybe-C 1pcs
C. 3.5mm line in 1pcs
D. User manual 1pcs

3
2. operational specification
keys
function
Method of operation
Multi
function
key
Turn on
Hold down the Multifunction button for 3-4 seconds. When there is no pairing
record, the startup automatically enters the pairing state. When there is pairing
record, the startup enters the connection back state. When the connection back
times out, the startup enters the pairing state
Turn off
When the device is powered on, long press the Multifunction button for 5 seconds
to shut down the device
Pairing
a. When there is no pairing record, the system automatically enters the pairing
state after starting the system
b. When there is pairing record, long press the "Multi-function button" for 5-8
seconds in the shutdown state to force the headset to enter the pairing state
Redial the last
number
When the phone is connected and in standby or music state, double-click the
"Multi-function button" to redial the last contact number of the phone.
Voice dialing
In the connected state, press the "Multi-function button" to activate the voice
dialing function of the mobile phone (the mobile phone needs to support this
function).
Answer the
phone
When an incoming call comes in, press the Multi-function button to answer the call
Hang up the
phone
During a call, press the Multi-function button to hang up the call
Refusing to
answer the
phone
When an incoming call comes in, long press the Multi-Function button for 1 second
to reject the call
Three-party
call function
a. If you have an incoming call during the call, you can press the Multi-function
button to hang up the call and connect to the new call
b. If an incoming call occurs during a call, double-click the Multi-function button
to hold the current call and reject the incoming call
c. When an incoming call comes in, hold the call and answer the call by holding
the Multifunction button for one second
d. During a three-party call, hold down the Multifunction button for 1 second to
switch between the hold call and the current call
e. During a three-party call, press the Multi-function button to end the call and
keep the call (Three-party call requires mobile phone support).

4
Volume
plus
Volume
increase
When playing music or during a call, press the Volume Plus button to increase the
volume
Next song
Long press the Volume Plus button for 1 second to switch to the next song
Reduction
in volume
Decrease the
volume
When playing music or making a call, press the Volume Reduction button to reduce
the volume
last song
Long press the Volume Reduction button for 1 second to switch to the previous
song
Mute
button
Microphone
silencing
During a call, double click the Mute button to mute the MIC, and double click the
Mute button again to unmute the MIC
Play/pause
When playing music, long press the Mute button for about 1 second to pause/play
music
Key
combinatio
n
Change of
language
Under the startup state, long press the "Add" button and the "Mute" button of the
microphone lever for 1 second at the same time to switch back and forth the
prompted voice language (English, French, Spanish three languages cyclic switch).
Clear the
pairing
record
To clear the pairing record, hold down the "Volume up" and "Volume down"
buttons for 5 seconds
3. Pairing and Connecting
A. In the off state, long press the multi-function button for 5-8 seconds, the headset enters
the pairing state, and the red and blue lights flash alternately.
B. Turn on the Bluetooth of the mobile phone and click Search. When "Elite Ultra 2.0"
appears, click the pairing connection successfully, and the phone displays that "Elite Ultra
2.0" is connected
C. You can use the Multi-function button, Volume Plus button, Volume minus button, and
Mute button on the Bluetooth headset to control the answering, hanging up,
playing/pausing of music, up-and-down music, volume plus or minus, and microphone
mute functions.

5
4. One drag two use method
A. The mobile phones connected to Elite Ultra are divided into two types: A and B;
B. Connect to host A first, turn on the Bluetooth headset to enter the pairing state, turn on
the Bluetooth function of the mobile phone, search for "EliteUltra2.0" and tap Connect.
After the connection is successful, turn off the Bluetooth function of host A, and the
EliteUltra2.0 automatically enters the pairing mode.
C. Use host B to connect to Elite Ultra2.0. After the connection is successful, enable the
Bluetooth function on host A and click Elite Ultra2.0 for connection (some mobile phones
may have the auto-connect function).
D. Please note that only one machine can play music at the same time between machine A
and machine B that has been successfully connected. The first machine can play music. If
the other wanted to play, it could only pause or turn off the music from the previous one.
5. Use of wired earphone
A. Plug one end of the original four 3.5mm audio cables into the audio port of the
headset and the other end into the audio port of the computer.
B. The computer plays music or makes Internet calls. You can listen to the music through
the headset and make calls through the MIC of the headset.

6

7
7. Charging
When the Elite Ultra 2.0 battery is low, the red light blinks. Please charge it
immediately. The charging time is about 2 hours.
Charging connection
Please connect the Tybe-C head of the Tybe-C charging cable to the "Elite
Ultra 2.0" charging port, and the USB head to the USB charger (car charge,
travel charge, computer USB, etc.).
8. Product Specifications
Bluetooth version
V5.2
Bluetooth chip
BT8925B2
Distance of communication
10m
Bluetooth protocol
HSP HFP A2DP AVRCP
Mode of decoding
AAC SBC
Built-in battery
420mAh /3.7V
Charge time
2 hours
Standby time
300 hours
Time for music
30 hours
Talk time
20 hours

8
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.

9
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d' en compromettre le fonctionnement.