Body Craft GALENA STRENGTH User manual

Questions?
As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or
find missing or damaged parts, we will guarantee your complete satisfaction through our authorized
dealer service centers or our home office customer service department. Please call your local dealer for
assistance or RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained techanicians will provide immediate
assistance to you, free of charge.
We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is
guranteed for as long as you own it. We will repair or replace anything that goes wrong.
Bodycraft is a division of Recreation Supply Inc.
P. O. Box 181
Sunbury, OH 43074
LEG PRESS OPTION FOR GALENA STRENGTH
INSTRUCTION MANUAL
TRAINING SYSTEM

BEFORE YOU BEGIN
Congratulations and thank you for selecting the BODYCRAFT GALENA
strength training system. The BODYCRAFT GALENA offers an impressive array
of strength training exercises to develop every major muscle group of the body.
Whether your goal is cardiovascular fitness, a shapely, toned body or dramatic
muscle size and strength, the BODYCRAFT GALENA will help you achieve
the specific results you want.
For your safety and benefit, read this anual and the acco panying literature
before using the BODYCRAFT GALENA. eep this manual for future reference.
If you have additional questions, please call your local BODYCRAFT dealer or
our customer service department at 800-990-5556 Monday through Friday,
9 a.m. until 5 p.m. Eastern Time.
IMPORTANT SAFETY NOTES
There is a risk assu ed by individuals who use this type of equip ent.
Before beginning this or any other exercise progra consult your physician.
This is especially i portant for individuals over the age of 35 or persons
with pre-existing health proble s. Recreation Supply, Inc. assu es no
responsibility for personal injury or property da age sustained by or
through use of this product.
1. This product must be assembled on a flat, level surface to assure its
proper function.
2. Clean pads and frame on a regular basis. We recommend warm,
soapy water. Do not use harsh or abrasive chemicals.
3. Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4. eep children away from the BODYCRAFT GALENA at all times.
5. eep your hands away from cables and pulleys during operation.
eep your hands away from moving parts other than the designated
handles.
6. When adjusting the seat, make sure the spring pin is fully engaged.
If not, the seat may slip and cause serious injury.
7. Make certain all cables are seated within the pulleys before every use.
8. Exercise with care to avoid injury.
9. If unsure about the proper use of the BODYCRAFT GALENA strength
training system call your local BODYCRAFT dealer or our customer service
department at 800-990-5556.
1

201
202
203
204
205
206
207
208
1
1
1
1
1
1
1
1
CONNECT TUBE
MAIN FRAME
FRONT STABILIZER
LEG PRESS SUPPORT
SLIDING TUBE
FOOT REST
HANDLE BAR
AXLE
NO DESCRIPTION QTY
211
212
213
214
215
216
217
218
219
220
221
222
223
6
1
2
1
2
2
2
1
1
5
2
2
1
RECT 45 X 75 END PLUG
50 SQ SPACER
50 END PLUG
45 END PLUG
RECT 1" X 2" END PLUG
3/4" BUSHING
3/8" BUSHING
RUBBER STOPPER
KNOB
PULLEY
HAND GRIP
NON-SLIP PAD
LEG PRESS CABLE
NO DESCRIPTION QTY
231
232
233
234
235
236
237
238
239
240
241
6
1
1
4
1
3
2
12
17
8
7
1/2" X 3" HEX HEAD BOLT
3/8" X 3" HEX HEAD BOLT
3/8" X 2-3/4" HEX HEAD BOLT
3/8" X 1-3/4" HEX HEAD BOLT
3/8" X 1-1/2" HEX HEAD BOLT
3/8" X 1/2" HEX HEAD BOLT
1/2" WASHER(LARGER)
1/2" WASHER
3/8" WASHER
1/2" NYLON NUT
3/8" NYLON NUT
NO DESCRIPTION QTY
PARTS LIST
2
(201) (203) (204)
(202)
(211) (212) (213) (214)
(215) (216) (217) (218)
(219) (220)
(223)
(221)
(222)
(205)
(207) (208)
(206)
(231) (232) (236)
(233) (234) (235)
(237) (238)
(240) (241)
(239)
0
(inch)
1" 2" 3"1/21/4 3/4 1/2 1/2

3
ASSEMBLE LEG PRESS STATION
19
54
1
201
202
204
205
206
207
208
203
211
215
213
221
222
221
32
213
219
212
211
211
211
211
214
231
231
232
231
231
231
239
90
90
77
236
238
238
238
238
239
238
238
240
240
240
240
240
240
237
239
237 234
220
218
Remove the 50 MM END PLUG(32) from BASE FRAME(1).
Remove PEC DEC SEAT PAD(54) from PEC DEC SEAT(19).
Attach CONNECT TUBE(201) to BASE FRAME(1) using three 3/8" X 1/2" HEX HEAD BOLT(236)
and three 3/8" WASHER(239).
Attach MAIN FRAME(202) to CONNECT TUBE(201) using two 1/2" x 3" HEX HEAD BOLT, four 1/2"
WASHER(238) and two 1/2" NYLON NUT(240). Attach MAIN FRAME to PEC DEC SEAT(19) using
3/8" x 3" HEX HEAD BOLT(232), two 3/8" WASHER(239) and 3/8" NYLON NUT(241).
Attach FRONT STABILIZER(203) to MAIN FRAME(202) using two 1/2" x 3" HEX HEAD BOLT, four 1/2"
WASHER(238) and two 1/2" NYLON NUT(240).
Insert two 3/4" BUSHING(216) to MAIN FRAME(202), then attach LEG PRESS SUPPORT(204)
to MAIN FRAME(202) using AXLE(208), two 1/2" WASHER(237) and two 1/2"
NYLON NUT(240).
Attach FOOT REST(206) to SLIDING TUBE(205) using two 1/2" x 3" HEX HEAD
BOLT, four 1/2" WASHER(238) and two 1/2" NYLON NUT(240).
Then insert SLIDING TUBE(205) into LEG PRESS SUPPORT(204)
and lock with KNOB(219).
Reinstall PEC DEC SEAT PAD(54) as shown.

4
INSTALL LEG PRESS CABLE
A5
1
82
87
49
A4
T8
29
87
82
49
A6 C2
29
82
49
87
(94a)
(223)
A12
A8
A9
A10
A11 A12
A1, A2, A7
79
80
68
68
49
90
90
90
90
87
A8, A9, A10, A11
234
239
239
240
220
A3
49
87
82
27a
235
239
239
241 204
223
2
uA7
80
90
90
87
94a
If previously installed, completely remove AB CABLE(94a) by unscrewing HEX HEAD BOLT(80) as
shown(fig uA7).
Assemble LEG PRESS CABLE(223)(from leg press box) and pulleys simultaneously. Insert eyelet end
of LEG PRESS CABLE(223) into slot in front of PRESS UPRIGHT(3), over pulley A1, A2, down and
around pulley A3, up and around A4, down and around pulley A5, up and around A6, under pulley A7, under
and around pulley A8, down and around A9, down and around A10, down and around A11. Then insert the
eyelet end into the bracket of LEG PRESS SUPPORT(204) and fix using 3/8" x 1-1/2 HEX HEAD BOLT(235),
two 3/8" WASHER(239) and 3/8" NYLON NUT(241) as shown(fig A12).
A1
A2
A4
A5
A6
A7
A8
A9
A11
A10
A12
A3
L3
T8
C2