BodyCAP P120GUI004 User manual

CORE TEMPERATURE MONITORING
QUICK START

P120GUI004 Quick Start Anilogger system.3 EN
2

P120GUI004 Quick Start Anilogger system.3 EN
3
Dear customers,
thank you for purchasing the system. This quick start guide
is designed to introduce you to the basic functions of the system. Hereby
you will find some recommendations related to its first use.

P120GUI004 Quick Start Anilogger system.3 EN
4
This document does not replace the user manual. For an optimal use of the
device, we recommend that you take note of all instructions in the user manual.
The is designed for continuous temperature monitoring in animals.
The User Guide is available as a PDF version (Adobe Reader needed) on the USB
memory stick provided with the system.
+33. (0)2 61 53 08 14
suppor[email protected]
www.animals-monitoring.com

P120GUI004 Quick Start Anilogger system.3 EN
5
SYSTEM COMPONENTS
Up
Down
Temperature
Menu
Ok
Back
AniLogger®monitor collects, records and displays temperature
data from Anipill®capsules.
Micro-USB
Connector
Anipill®Capsules
When awaken by Activator, Anipill® capsule collects and sends data to
the Anilogger®monitor.
Switch on/off the
screen and
the monitor

P120GUI004 Quick Start Anilogger system.3 EN
6
Activator
Allows to start Anipill®capsules
BodyCap USB memory stick
Includes user guide and installer of
AniLogger Manager software.
USB adapter (optional) and
2 micro-USB/USB cables
Allows to supply Activator or Anilogger®
monitor and allows the connection to
AniLogger Manager software through the USB
port.

P120GUI004 Quick Start Anilogger system.3 EN
7
First Use
Basic Instructions

P120GUI004 Quick Start Anilogger system.3 EN
8
These instructions will allow you to boot your system.
To be aware of all the features, please refer to the user manual included on the USB
memory stick.
Before the rst use of your system, you have to perform a set of operations.
1. HMI INSTALLATION
You must install your AniLogger Manager software before using your system.
It is the essential tool to set your monitor.
To install the Anilogger Manager software, please run: «AniLogger_
Manager_X.X.X.X.exe» or «MAC-AniLogger Manager_X.X.X.X.exe» & Mac driver
les stored on the USB stick supplied with the system.
Minimum System Requirements :
- Processor 1GHz
- 500 Mo of disk space
- Windows 7
®
or higher Microsoft
®
operating system (32 or 64 bits)/
Mac OS X (10.9 Lion) or higher
- 1024x768 for screen resolution
2. MATERIAL NEEDED
- PC or Mac including the Anilogger Manager software
- Anilogger®Monitor
- Anipill®Capsule
- Activator
- Cables
- Power supply adapter (optional module)

P120GUI004 Quick Start Anilogger system.3 EN
9
3. SET UP
Follow the subsequent procedure:
- To switch on the monitor Anilogger®, complete a long pressure on the button
(on the right side).
Connect the monitor to a power supply if needed.
- Connect the monitor to a PC using the USB cable provided and run the Anilogger
manager software.
- Select «Conguration» item:
- Set up the monitor («Monitor» and «Experiment Tab»):
- Shutdown the software and unplug the monitor
- Connect the activator to a power supply
- On the Anilogger® Monitor, Select the «Pill Menu» and select «Pill Activation».
- The monitor will guide you, step by step until the association of the capsule to
the monitor.
- Note the ID of the capsule, and the monitor channel displayed on the monitor
screen (May be useful for Backup mode)
- The capsule is now associated with the monitor and can be swallowed.

P120GUI004 Quick Start Anilogger system.3 EN
10
4. DATA COLLECTION
The AniLogger® monitor collects the data from the associated capsules.
During a measurement cycle:
It is possible to follow the temperature data in real time if the capsule is in the
communication area (about 1-3m depending on environement and species). For
this, press « ».
When pressing the button «OK»on the screen displaying the data of the 8 capsules,
the detailed information of the selected capsule will be displayed.
It is possible to add Markers using the «Marker» menu of the monitor.
Those Markers are used to identify an important moment and are plotted on the
graph of the Anilogger Manager software.
5. VISUALIZATION OF THE DATA
AFTER A MEASUREMENT CYCLE

P120GUI004 Quick Start Anilogger system.3 EN
11
Plug the monitor to the PC/Mac and select «Unloading».
The curve displayed is not saved by the application. You have to Export the curve as
a PDF or the data as a CSV le and save it on your PC/Mac disk.
As you want you can visualize the data curves during a measurement cycle.
6. SWITCH OFF THE SYSTEM
Visualize the curve via Anilogger Manager and export the data in order to print or
save them.
Deactivation of the capsuleshas to be done using menu Pill > Pill Status /
Deactivation.
Select the capsule concerned. This procedure switches off the capsule if this one
is in the communication area.
To switch off the monitor, complete a long pressure on the button (on the
right side). This action is only possible if no capsule is associated.
7. CHECK-LIST BEFORE INGESTION
Monitor:
-Battery level
-Monitor Time and Date
-Monitor Channel (1 monitor per Channel)
-Number of data to synchronize
- 8 pills per monitor.
Capsule:
-Single Use
-Activated and associated to a monitor
-ID number identied

If you have any question and you did not found the answers in the
user manual, please request assistance from BodyCap:
BODYCAP
3, rue du Docteur Laennec
14200 Hérouville St Clair
FRANCE
+33. (0)2 61 53 08 14
suppor[email protected]
www.animals-monitoring.com