Bodyworx MULTI GYM LX7000HG User manual

BODYWORX
BODY WORX
Version A
Retain this owner’s manual for future reference
Read and follow all instructions in this owner’s manual
Model No:
LX7000HG
MULTI GYM

Step 1
Visit our Website
Go to the GPI Sports website: www.gpisports.com.au/warranty
Warranty Registration Form
Step 2
Enter Purchase Information
Enter all purchase information including the serial number and proof
of purchase which can be uploaded from this page
Step 3
Call Our Toll Free Number
If a warranty service request is required on your product
please call the toll free number - 1800 005 770
Congratulations on purchasing your product, we at GPI believe that our product range is of the
highest quality and represents great value for money.
We back our product range up with our industry leading warranty.
Please see below for the step by step instructions on how to register your product warranty
online.
GPI Sports & Fitness

TABLE OF CONTENTS
BEFORE YOU BEGIN..................................................................……………. 1
IMPORTANT SAFETY NOTICES.................................................................… 2
HARDWARE PACK….......…........................................................................................ 8
ASSEMBLY INSTRUCTIONS...................................................................................... 11
EXPLODED DIAGRAM………………………………………………………..............……25
PARTS LIST…………………………………………........................................................26
WEIGHT RESISTANCE CHART……………………………………………..............……29
BEFORE YOU BEGIN
Thank you for selecting the MULTI GYM LX7000HG .For your safety and
benefit, read this manual carefully before using the machine. As a
manufacturer, we are committed to provide you complete customer satisfaction.
IMPORTANT ASSEMBLY INFORMATION............................................................... 3
OPERATIONS NOTES, CARE AND MAINTANENCE, WEIGHT CAPACITY…...… 4
1

IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your machine. In particular, note the following safety
precautions:
1. Keep children and pets away from the machine at all times. DO NOT
leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.
. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or
physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to
properly warm up.
11. Never operate the machine if the machine is not functioning properly.
12. A spotter is recommended during exercise.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE
AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. WE ASSUME NO
RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED
BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
2
13. Maximum user weights: 136Kgs

IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Bench: Two Adjustable Wrenches and Allen
Wrenches.
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to
be assembled.
Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not
tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
Weight Plate Installation
Slide weight plates onto Guide Rod from top to
bottom.
The deep groove on each weight plate needs to
face backwards and downwards.
Deep Groove
3

OPERATION NOTES
Weight Plate Selection
1. Use the Weight Selector Pin to select the number of weight plates to exercise.
2. Do not insert weight selector pin while the weight stack or top plate is in elevated position.
3. Be certain the weight Selector Pin is completely inserted.
4. Each Weight Plate weights approximately 7.2kgs
5. Please refer to Weight Resistance Chart page.
6. Never use dumbbells or other means to increase the weight resistance. Use only weight plates
provided by manufacturer.
7. For safety purpose while the equipment is not in use. Insert the Lock Pin into the hole
on Guide Rod, and use Combination Lock to lock the Pin to prevent the movement of
Weight Plates. Please refer to the Combination Lock set up.
Cable Tension Adjustment
Adjust the tension of the Cable System by moving the position of lower Pulley on the
Double Floating Pulley Brackets.
If the tension is too loose, move the lower pulley up by one notch.
If the tension is too tight, move the lower pulley down by one notch.
Lower Pulley
Arm Curl Pad Adjustment
Pull up and flip the Arm Curl Pad along the track on the Arm Curl Stand to face toward back when
doing Leg Press exercises.
Do not over tighten Allen Bolt (#90) so the Bolt can move along the track smoothly.
4

CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
4. Examine the equipment regularly for signs of damages or wear.
5. Replace any defective components immediately and/or keep the equipment out of use until
repair.
6. Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum user weight: 136kg.
2. Assembled Dimension: 155 x 114 x 207cm
5

6

1
110
7

63
8

7
9

109 12
10

1
89 x 2
x 5
104
96 x 2
95 x 2
x8
101
M10 × 3
M10
3/4
3/4
M10 × 3/4 M10 × 2
1/2
36
84 x 1 M10 × 21/8
104
110
84 101
101
11

2
89 x 4
x 1
104
x6
101 M10
3/4
M10 × 3/4
1
80 M10 × 4
12

3
x 4
101
88 x 4
78 x 2
79 x 2
x 4
103
M10 x 1 M12 x3 1/2
M12 x5 3/8 M12
x 8
100 1 3/4
13

4
89 x 2
x 4
103
x 2
101
M12
3/4
M10 × 3/4
4
76 M12 × 8 1/2
x8
100 1
14

5
1
90 M8 × 6 7/8
2
91 M8 × 2 1/8
2
93 M8 × 5/8 x 6
102 5/8
A
A
15

6
92 x 2
x 2
106 M6
M8 ×1 5/8
1
77 M12 × 8 1/4
x 2
102 5/8
x 1
103 M12
x2
100 1
M6 ×3/4
52 x 1 1/2
x
8
A
A
16

7
84 x3
x 6
104
x 12
101
M10
3/4
M10 × 2 1/8
1
80 M10 × 4
2
81 M10 × 3 3/4
1
37
101
A
66 B
17

7-A
7-A
37
37
104 101
101
68
67
67
66
28
84
7-B
7-B
5
66
37
18