Bodyworx L868SS User manual

HEAVY DUTY
SQUAT RACK
Model No:
L868SS
Retain this owner’s manual for future reference
Read and follow all instructions in this owner’s manual
AnoisreV

Before Your Begin
Assembly Instructions
Page 2
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the following
safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once.
CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the bench
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT
wear robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Tools Required
Tools Required : Allen Wrentch Set / Socket Wrentch Set
Adjustable Wrentch / Crescent Wrench
Rubber Mallet / Tape Measure
ASSEMBLY REQUIRES AT LEAST THREE PERSONS
Note:
1.Only hand tighten all nuts and bolts until whole equipment
assembled.
2.Descriptions of pieces as LEFT and RIGHT are from
the point of view of standing behind the equipment facing
towards the front.

Assembly Instructions
Page 3
STEP 1
3
7
8
W12
x26
BW12
x10
N12
x18
H12-18H12-18
8x
4
6
H12-17H12-17
x10
2
5
2x
1
2x
2x
2x
9
4x

Assembly Instructions
Page 4
Parts & Hardware List
Part# Description Qty Remark
1 Base Frame 2
2 Upright Frame 2
3 Bottom Cross Frame 1
4 Top Cross Frame 1
5 Right J-Hook 1
6 Left J-Hook 1
7 Big Rubber Pad 2 Pre-assembled
8 Small Rubber Pad 2 Pre-assembled
9 F50x70mm Inner Cap 4 Pre-assembled
F6-1 M6x10mm Flat Head Bolt 8 Pre-assembled
H12-17 M12x95 mm Hex Head Bolt 10
H12-18 M12x100 mm Hex Head Bolt 8
BW12 M12 Big Washer 10
W12 M12 Washer 26
N12 M12 Nut 18

BODYWORX
BODYWORX
Model No: L868SS
To register your warranty, please go to
www.gpisports.com.au