Bodyworx VIMPSBS User manual

BODYWORX
BODY WORX
Version A
Retain this owner’s manual for future reference
Read and follow all instructions in this owner’s manual
BOXING STAND
Model No:
VIMPSBS

Step 1
Visit our Website
Go to the GPI Sports website: www.gpisports.com.au/warranty
Warranty Registration Form
Step 2
Enter Purchase Information
Enter all purchase information including the serial number and proof
of purchase which can be uploaded from this page
Step 3
Call Our Toll Free Number
If a warranty service request is required on your product
please call the toll free number - 1800 005 770
Congratulations on purchasing your product, we at GPI believe that our product range is of the
highest quality and represents great value for money.
We back our product range up with our industry leading warranty.
Please see below for the step by step instructions on how to register your product warranty
online.
GPI Sports & Fitness

PART LIST
PART NO: DESCRIPTION Q’TY
1. BASE CONNECT TUBE 1
2. LEFT BASE 1
3. RIGHT BASE 1
4. VERTICAL BEAM 1
5. TOP CROSS BEAM 1
6. LEFT BRACE FRAME 1
7. RIGHT BRACE FRAME 1
8. STORAGE POST 3
9. STEEL PLATE 2
10. RUBBER END CAP 3
11. RUBBER CAP 1
12. 60MM ROUND END CAP 1
13. 25MM ROUND END CAP 5
14. HOOK 1
15. M10*80MM HEX BOLT 2
16. M10*70MM HEX BOLT 8
17. M10*20MM HEX BOLT 7
18. M10 NYLON NUT 11
19. M10 ARC WASHER 10
20. M10 WASHER 19
21. M10 NUT 1
22. LEG LIFT PAD BAR 1
23. LEG LIFT PAD 2
ST EP 1
1. ATTACH STORAGE POST (8) INTO THE
HOLES ON THE BASE (1,2,3) SECURE
WITH BOLT (17), AND WASHER (20)AS
SHOWN.
2. P LACE RUBBER END CAP (10) AND
RUBBER CAP (11) ONTO THE BASE
(1,2,3). ATTACH LEFT BASE (2) AND
RIGHT BASE (3) ONTO BAS E CONNECT
TUBE (1) SECURE WITH BOLT (16),
WASHER (20), AND NYLON NUT (18).
3. P LACE 25MM ROUND END C AP (13)
ONTO STORAGE POST (8)
FA S T EN A L L B O LT S B Y U S I N G
TOO L.
1

ST EP 2
1. ATTACH VERTICAL BEAM (4) ONTO
THE BASE CONNECT TUBE (1) SEC URE
WITH BOLT (16), WASHER (20), AND
NY LON NUT (18) AS SHOWN.
2. INSERT TOP CROSS BEAM (5) INTO
VERT IC AL BEAM (4) SECURE WITH
BOLT (17) AND WASHER (19) AS
SHOWN.
3. P LACE HOOK (14) INTO TOP CROSS
BEAM (5) SECURE WITH NUT (21)
ARC WASHER (19), AND NYLON NUT
(18) AS SHOWN.
4. P LACE 60MM ROUND END C AP (12)
ONTO TOP CROSS BEAM (5).
ST EP 3
1. ATTACH LEFT BRACE FRAME (6)
AND RIGHT BRACE FRAME (7) ONTO
VERT IC AL BEAM (4) SECURE WITH
BOLT (15), ARC WASHER (19), AND
NY LON NUT (18) AS SHOWN.
2. INSERT THE OTHER END OF LE FT
BRACE FRAME (6) AN D RIGHT BRACE
FRAME (7) ONTO THE LEFT BASE (2)
AND R IGHT BASE (3) SECURE WITH
BOLT (16), WASHER (20), AND NYLO N
NUT (18) AS SHOWN.
3. ATTACH ST EEL P LATE (9) ONTO THE
LEFT BASE (2) AND RIGHT BASE (3)
AS SHOWN.
4. SLIDE LEG LIFT PAD BAR (22) THROUGH
VERTICAL BEAM (4) SLIDE THE LEG LIFT
PAD (23) AND 25MM ROUND CAP (13)
ONTO LEG LIFT PAD BAR (22) AS SHOWN.
2
3

BODYWORX
BODYWORX
Model No: VIMPSBS
To register your warranty, please go to
www.gpisports.com.au