Bodyworx KRX700 User manual

Model No: KRX700
AIR ROWER
Retain this owner’s manual for future reference.
Read and follow all instructions in this owner’s manual.
Version A

Step 1
Visit our Website
Go to the GPI Sports website: www.gpisports.com.au/warranty
Warranty Registration Form
Step 2
Enter Purchase Information
Enter all purchase information including the serial number and proof
of purchase which can be uploaded from this page
Step 3
Call Our Toll Free Number
If a warranty service request is required on your product
please call the toll free number - 1800 005 770
Congratulations on purchasing your product, we at GPI believe that our product range is of the
highest quality and represents great value for money.
We back our product range up with our industry leading warranty.
Please see below for the step by step instructions on how to register your product warranty
online.
GPI Sports & Fitness

2
IMPORTANT SAFETY INSTRUCTION.......................................................3
SAFETY GUIDELINES.................................................................................4 - 6
ASSEMBLY INSTRUCTION......................................................................... 7 - 12
OPERATING YOUR ROWER.......................................................................13 - 15
OPERATINGTHE CONSOLE...................................................................... 17 - 21
MONITORINGYOUR HEART RA TE............................................................ 22
PA RT LIST....................................................................................................
23 - 25
EXPLODED VIEW DIAGRAM...................................................................... 26
MAINTANENCE............................................................................................ 16

3
from your physician.
When using exercise equipment, you should always take basic precautions,
including the following:
Read all instructions before using the machine. These instructions are written to
ensure your safety and to protect the unit.
Do not allow children on or near the equipment.
Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the manufacturer.
Such attachments might cause injuries.
Wear proper exercise clothing and shoes for your workout, no loose clothing.

Do not over exert yourself or work to exhaustion.
If you feel any pain or abnormal symptoms, stop your workout immediately and
consult your physician.
Never operate the unit after it has been dropped or damaged.
Return the equipment to a service center for examination and repair.
Never drop or insert objects into any opening in the equipment.
Always check the unit before each use.
Make sure that all fasteners are secure and in good working condition.
Do not use the equipment outdoors or near water.
PERSONAL SAFETY DURING ASSEMBLY
It is strongly recommended that a qualified dealer assemble the equipment.
Assistance is required.
Before beginning assembly, please take the time to read the instructions thoroughly.
Read each step in the assembly instructions and follow the steps in sequence.
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment.
Assemble and operate the machine on a solid, level surface.
Locate the unit a few feet from the walls or furniture to provide easy access.
The machine is designed for your enjoyment. By following these precautions and using common sense,
you will have many safe and pleasurable hours of healthy exercise.
After assembly, you should check all functions to ensure correct operation. If you experience problems,
first recheck the assembly instructions to locate any possible errors made during assembly.

4
Successful cardio training programs have one prominent feature in common...safety.
Cardio training has some inherent dangers, as do all physical activities.
The chance of injury can be greatly reduced or completely removed by using correct
running techniques, proper breathing, maintaining equipment in good working
condition, and by wearing the appropriate clothing.
It is highly recommended that you consult your physician before beginning
any exercise program. This is especially important for individuals over the
age of 35, or persons with pre-existing health problems.
 Always warm up before starting a workout. Try to do a total body warm up
groups you are going to be using. This can be as simple as performing a
warm up set of high repetitions and light weight for each exercise.
 Always wear appropriate clothing and shoes when exercising.
breathable clothing will reduce the risk of injury.
 Maintaining equipment in proper operating condition is of utmost
importance for a safe cardio training program.
 Read and study all warning labels on this machine. It is necessary
that you familiarise yourself and all others with the proper operation
of this machine prior to use.
 Keep hands, limbs, loose clothing and long hair well out of the way of all
moving parts.
 Inspect the machine daily for loose or worn parts. If a problem is found do
not allow the machine to be used until all parts are tightened or worn or
defective parts are repaired or replaced.

5
This exercise equipment is designed and built for optimum safety for home use.
However, certain precautions always apply whenever you operate any exercise
equipment.
Be sure to read the entire manual before assembly and operation of this machine.
Also, please note the following safety precautions.
MECHANICAL SAFETY
Inspect the equipment prior to exercising to ensure that all nuts and bolts are
fully tightened before each use.
Replace any defective components immediately and/or keep the equipment out
of use until repair.
Do not use attachments not recommended by the manufacturer.
Never drop or insert an object into any opening.
Only one person may use the rower at a time.
Never activate the rower when someone is standing on the belt.
APPROPRIATE ATTIRE
Always wear appropriate clothing.
Do not wear loose clothing that might catch on any part of this rower.
Always wear non-slippery shoes while working with the rower.
Do not wear shoes with heels or leather soles.
Check the soles of your shoes and remove any dirt and embedded stones.
CHILDREN AND PETS
Most exercise equipment is not recommended for small children.
Children should not use the equipment unless they are under strict adult supervision.
Exercise equipment has many moving parts.
In the interest of safety, keep others (especially children and pets) at a safe distance
while you exercise.

6
Assembly of the machine takes professional installers about 1/2 hour to complete. If this is the
first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the
assembly steps sequentially, the process will take time, but is fairly easy.
ASSEMBLY TIPS
Read all “NOTES”on each page before beginning each step.
While you may be able to assemble the machine using the illustrations only, important safety
notes and other tips are included in the text.
Some pieces may have extra holes that you will not use. Use only those holes indicated in
the instructions and illustrations.
NOTE: To find out the length of a bolt, measure its shank (the long, narrow part beneath
the head).
Refer to the following diagram:
Do not fully tighten bolts until instructed to do so.

7
Attach Front/Rear support frame (7/8) to Front stabiliser (4). Lock by Hex round
head bolt M6X16 (81) and Flat washer M6 (76). Do not tighten the bolts until Step 2.

8
Turn the fan rower over and put it on the Styrofoam (A)(B) as shown below picture. Do not put it on the
ground to avoid damaging the chain cover. Attach Front/Rear support frame (7/8) to Main Frame (1) and
lock by Hex round head bolt M6X16 (81) and Flat washer M6 (76). Tighten all the bolts.

9
Lift up the Main frame (1) and Monorail (2). Insert the Monorail (2) into the Main Frame (1). Make sure to
lock the Folding axis (24) on the part (2a)

10
Put the pin (98) on.
Lift up the Meter arm (6). And lock the Meter arm (6) on Left/Right side cover (57/58) with cross head
bolt M6X10 (72).

11
Lock the Pedal set (5) on the Main frame (1) with the hex round head bolt M8X150 (84).

12
1. Insert the smart phone holder (20) into the meter (19). Tie up the smart phone holder (20) to the three
bumps on the meter (19) with the elastic rope (21).
2. Lock the Meter (19) on the Meter holder (69) with Round head hex bolt M8X75 (78), Flat washer M8
(79), and Nylon nut M8 (80). Insert the Sensor wire (23) into the Meter hole (19a).
3. Assembly complete.
4. Now you can put your phone on the smart phone holder (20).
Finish

13
13
MOVING THE ROWER
The rower is easy to move around safely.
To move the rower:
1. Lift the rear of the rower
2. Roll the rower on its front transport wheels to the desire location.
3. Gently lower the rear of the rower to the ground level
STORING THE ROWER
The rower can be separated to minimise the unit size for storage.
1. Remove the Pull Pin (#98).
2. Lift up the Main Frame (#1) and pull out the Rail Frame (#2)
3. Insert the Pull Pin (#98) back to the hole in the Main Frame (#1)

14
12
DAMPER ADJUSTMENT
There is a damper adjustment on the right side of the fan
Shroud. The indicator can be moved up/down to adjust
the damper. #1 is the lowest setting, #9 is the highest
setting.
HANDLEBAR POSITION
Handlebar (#3) can be placed on the hook of the Console Monitor Post (#6) or it can be
placed on the Handlebar Holder (#52).

15
12
FOOT PEDAL ADJUSTMENT
1. Pull the Foot Pedal (#45) out of the two bulges of the Pedal
Support Plate (#5).
2. Lower or raised the Foot Pedal to the desired location.
3. Lock the Foot Pedal (#45) by pressing the adjustment
holes onto the Bulges.
CELL PHONE HOLDER.
Slide the cell phone into the space between the Cell Phone Bracket (#20) and Console
Monitor (#19) by moving the Cell Phone Bracket (#20) up or down.
Bulges

Maintenance
2. Position the MAIN FRAME ASSEMBLY(1) as shown in the below illustration. Unhook the LEFT
BUNGEE CORD HOOK(12L) from the MAIN FRAME(1). Make a mark on the BUNGEE CORD(38)
to move the hook forward 2 inches. Refer to View 1 to View 3 to untie the BUNGEE CORD(38) from
the LEFT BUNGEE CORD HOOK(12L), and move the hook forward 2 inches. Refer to View 4 to
View 6 to retie the BUNGEE CORD(38) to the LEFT BUNGEE CORD HOOK(12L). Hook the LEFT
BUNGEE CORD HOOK(12L) back into the MAIN FRAME(1) and push the hook to the left side to
touch the inner wall of the MAIN FRAME(1). CAUTION: Always use two hands with a secure grip
when re-attaching the BUNGEE CORD HOOKS(12L & 12R).
Unhook the RIGHT BUNGEE CORD HOOK(12R) from the MAIN FRAME(1). Do the same as above
to adjust the BUNGEE CORD(38) on the right side.
BUNGEE CORD ADJUSTMENT
Over time, about 250,000 strokes on HANDLEBAR(3),
your BUNGEE CORD(38) may stretch. Follow the
following process to adjust:
1. Position the MAIN FRAME ASSEMBLY(1)as
shown in the illustration. Remove the MAIN FRAME
CAP(68) from the MAIN FRAME(1). Slid out the
BOTTOM COVER(70) from the MAIN FRAME(1).
1. 2.
6.5.4.
3.
3. Position the MAIN FRAME ASSEMBLY(1)as shown
in the illustration. Slid the BOTTOM COVER(70)
back into the MAIN FRAME(1).Press the MAIN
FRAME CAP(68) into the MAIN FRAME(1).
12L 12R
1
1
16

17
CONSOLE DISPLAY
TIME:
-Display flashing “00:00” for presetting the TIME program. Time can be set from
1:00 to 99:00 minutes.
-Displays the time during exercise.
STROKE:
-Display the total number of strokes during exercise
PULSE:
- Display the heart rate from 40 to 220 beats per minute during exercise. To use this
function, the user must wear the Heart Rate Chest Strap.

18
CALORIES:
can be set from 10 to 999 cals
PADDLE WIDTH:
-Display the distance per stroke.
STROKE RATE:
-Display the current strokes per minute during exercise.
DISTANCE:
value can be set from 500 to 9999.
CYCLE:
-Display flashing “8” for presetting the number of cycles for the INTERVAL program. The
value can be set from 1 to 99.
-Value will count down from the preset value during INTERVAL program.
WATTS:
-Display the amount of power generated at any moment during the workout.
CONSOLE BUTTONS
BACK BUTTON:
-Press the button to return to the previous program
UP & DOWN BUTTONS:
-Press the buttons to adjust the value in the program.
SELECT BUTTON:
-In IDLE mode, press the button then select through each program options.
The program options are QUICK START, TIME, DISTANCE, CALORIES, PLAY THE
GAME, and INTERVAL PROGRAMS of 20/10, 10/20 & 10/10.

19
ENTER/STOP BUTTON:
-Press and hold the button for three seconds to reset the console program.
-Press the button to pause the program during workout.
INITIAL SETUP
POWER ON:
-Move the Handlebar or press any button.
POWER OFF:
-In IDLE mode, if there is no activity detected for 20 seconds, the console will shut
-During all programs except 20/10, 10/20, 10/10 interval programs, the console will
activity detected for two minutes.
METRIC & STANDARD UNIT:
The initial factory setting is in “Miles”. To toggle between Miles and Kilometers, press
BATTERY INSTALLATION:
Console operates on two Size C batteries. The battery compartment is on the back
of the console.
PROGRAMS
The Console Monitor has eight programs: QUICK START, TIME, DISTANCE,
CALORIES,PLAYTHE GAME,and INTERVAL PROGRAMS of20/10, 10/20 & 10/10.