Bosch LR 1 User manual

English | 13
Bosch Power Tools 1 609 92A 268 | (8.12.15)
Entsorgung
Messwerkzeuge, Zubehör und Verpackungen sollen einer umweltgerechten Wieder-
verwertung zugeführt werden.
Werfen Sie Messwerkzeuge und Akkus/Batterien nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2012/19/EU müssen nicht
mehr gebrauchsfähige Messwerkzeuge und gemäß der europäi-
schen Richtlinie 2006/66/EG müssen defekte oder verbrauchte
Akkus/Batterien getrennt gesammelt und einer umweltgerechten
Wiederverwendung zugeführt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English
Safety Notes
Readandobserveallinstructions.SAVETHESEINSTRUCTIONS FOR
FUTURE REFERENCE.
Keep the measuring tool away from cardiac pacemakers. The mag-
net plate 4generates a field that can impair the function of cardiac
pacemakers.
OBJ_BUCH-780-006.book Page 13 Tuesday, December 8, 2015 11:32 AM

14 | English
1 609 92A 268 | (8.12.15) Bosch Power Tools
Keep the measuring tool away from magnetic data medium and magnetically-
sensitive equipment. The effect of the magnet plate 4can lead to irreversible da-
ta loss.
Have the measuring tool repaired only through qualified specialists using
original spare parts. This ensures that the safety of the measuring tool is main-
tained.
Do not operate the measuring tool in explosive environments, such as in the
presence of flammable liquids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dustor fumes.
Readand strictly observethe safetywarningsin theoperating instructionsof
the rotational laser.
Product Description and Specifications
Please unfold the fold-out page with the representation of the measuring tool and
leave it unfolded whilereading the operating instructions.
Intended Use
The measuring tool is intended for swift finding of rotating laser beams in the wave-
length listed in the “Technical Data”.
The measuring tool is suitable for indoor and outdoor use.
Product Features
The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1On/Off button
2Button for selecting the measuring accuracy
3Audio signal button
4Magnet plate
5Centre mark
6Reception area for the laser beam
7Display
8Laser receiver spirit level
9Latch of battery lid
10 Serial number
11 Battery lid
12 Retainer openings for holder
OBJ_BUCH-780-006.book Page 14 Tuesday, December 8, 2015 11:32 AM

English | 15
Bosch Power Tools 1 609 92A 268 | (8.12.15)
13 Locking screw for holder
14 Holder upper edge
15 Construction laser measuring rod*
16 Fastening screw of holder
17 Holder
* The accessories illustrated or described are not included as standard delivery.
Display Elements
aDirection indicator, down
bIndicator for measuring accuracy “Medium”
cBattery low indicator
dDirection indicator, up
eAudio signal indicator
fCentre indicator
gIndicator for measuring accuracy “Fine”
Technical Data
Laser Receiver LR 1 LR 1 G
Article number 3 601 K15 40. 3 601 K69 70.
Receivable wavelength 635–650 nm 532–535 nm
Suitable for rotational
laser level GRL 250 HV
GRL 300 HV
GRL 400 H
GRL 300 HVG
Workingrange1) withrotational
laser level:
–GRL250HV
–GRL300HV/HVG
–GRL400H
125 m
150 m
200 m
–
150 m
–
Receiving angle 120° 120°
1) The working range (radius) can be reduced due to unfavourable ambient conditions (e.g. direct
sunlight).
2) depends on clearance between laser receiver and rotational laser level
3) dependent on laser class and laser type of the rotational laser level
4) The measuring accuracy can be impacted by unfavourable environmentalconditions (e.g. direct
sun irradiation).
The measuring tool can be clearly identified with the serial number 10 on the type plate.
OBJ_BUCH-780-006.book Page 15 Tuesday, December 8, 2015 11:32 AM

16 | English
1 609 92A 268 | (8.12.15) Bosch Power Tools
Assembly
Inserting/Replacing the Battery
Alkali-manganese batteries are recommended for the measuring tool.
– Press the latch 9of the battery lid outward and open the battery lid 11.
When inserting the battery, pay attention to the correct polarity according to the rep-
resentation on the inside of the battery compartment.
When the battery low indicator cappears for the first time on thedisplay 7, the meas-
uring tool can still be operated for approx. 3 h.
If the measuring tool is not used for a long period of time, the battery mustbe
removed. The battery can corrode or discharge itself over long periods.
Receivable rotation speed >200 min-1 >200 min-1
Measuring accuracy 2) 3) 4)
– Setting “fine”
– Setting “medium” ±1mm ±3mm ±1mm ±3mm
Operating temperature – 10 °C ... +50 °C – 10 °C ... +50 °C
Storage temperature – 20 °C ... +70 °C – 20 °C ... +70 °C
Battery 1x9V6LR61 1x9V6LR61
Operating time, approx. 50 h 50 h
Weight according to
EPTA-Procedure 01:2014 0.25 kg 0.25 kg
Dimensions
(length x width x height) 148 x 73 x 30 mm 148 x 73 x 30 mm
Degree of protection IP 65 (dust-proof and
protected against
powerful water jets)
IP 65 (dust-proof and
protected against
powerful water jets)
Laser Receiver LR 1 LR 1 G
1) The working range (radius) can be reduced due to unfavourable ambient conditions (e.g. direct
sunlight).
2) depends on clearance between laser receiver and rotational laser level
3) dependent on laser class and laser type of the rotational laser level
4) The measuring accuracy can be impacted by unfavourable environmentalconditions (e.g. direct
sun irradiation).
The measuring tool can be clearly identified with the serial number 10 on the type plate.
OBJ_BUCH-780-006.book Page 16 Tuesday, December 8, 2015 11:32 AM

English | 17
Bosch Power Tools 1 609 92A 268 | (8.12.15)
Operation
Initial Operation
Protect the measuring tool against moisture and direct sun light.
Do not subject the measuring tool to extreme temperatures or variations in
temperature. As an example, do not leave it in vehicles for a long time. In case of
large variations in temperature, allow the measuring tool to adjust to the ambient
temperature before putting it into operation. In case ofextreme temperatures or
variations in temperature, the accuracy of the measuring tool can be impaired.
– Position the measuring tool at least 50 cm away from the rotational laser level. Po-
sitionthe measuringtool in sucha manner thatthe laser beamcan reachthe recep-
tion area 6. Set the highest rotational speed on the rotational laser level.
Switching On and Off
A loud audio signal sounds when switching on the measuring tool. “At a dis-
tance of 0.2 m, the A-weighted sound pressure level of the audio signalcan be up
to 95 dB(A).”
Do not hold the measuring tool close to your ear! The loud audio signal can
cause hearing defects.
To save energy, only switch the measuring tool on when you are using it.
–Toswitch on the measuring tool, press the On/Off button 1. Two audio signals
sound and all display indicators light up briefly.
–Toswitch off the measuring tool, press the On/Off button 1again.
Whenno buttonis pressedonthe measuringtoolfor approx.10 minutesand whenno
laser beam reaches the receptionarea 6for 10 minutes, the measuring tool automat-
ically switches off in order to save the battery. The switching off is indicated by an au-
dio signal.
Selecting the Setting of the Centre Indicator
With button 2, you can specify with which accuracy the position of the laser beam is
indicated as central on the reception area:
– “Fine” adjustment, (indication gon the display),
– “Medium” adjustment, (indication bon the display).
An audio signal sounds when the accuracy setting is changed.
Whenever switching on the measuring tool, the accuracy level “medium” is set.
OBJ_BUCH-780-006.book Page 17 Tuesday, December 8, 2015 11:32 AM

18 | English
1 609 92A 268 | (8.12.15) Bosch Power Tools
Direction Indicators
The bottom a, centre fand top dindicators (both on the front and rear side of the
measuring tool) indicate the position of the rotating laser beam in the reception area
6. Additionally, the position can be indicated with an audio signal (see “Audio Signal
for Indication of the Laser Beam”, page 18).
Measuring tool too low: When the laser beam runs through the top half of the recep-
tion area 6, the bottom direction indicator aappears on the display.
When the audio signal is switched on, a slow-beat signal sounds.
Move the measuring tool upward in the direction of the arrow. When approaching the
centre mark 5, only the tip of the direction indicator ais indicated.
Measuring tool too high: When the laser beam runs through the bottom half of the
reception area 6, the top direction indicator dappears on the display.
When the audio signal is switched on, a fast-beat signal sounds.
Move the measuring tool downward in the direction of the arrow. When approaching
the centre mark 5, only the tip of the direction indicator dis indicated.
Measuring tool in centre position: When the laser beam runs through the reception
area 6at the centre mark 5, the centre indicator flights up. When the audio signal is
switched on, a continuous signal sounds.
Audio Signal for Indication of the Laser Beam
The position of the laser beam on the reception area 6can be indicated via an audio
signal.
After the measuring tool has been switched on, the audio signal is always switched
off.
When switching on the audio signal, you can choose between two volume levels.
– To switch on the audio signal or change the volume level, push the acoustic signal
button3until the requested volume level is indicated. At medium volume level, the
audio signal indicator ein the display flashes; at high volume level, the indicator is
continuously lit. When the audio signalis set to off, the indicator goes out.
Working Advice
Marking
When the laser beam runs through the centre of the reception area 6, itsheight can
be marked at the centre mark 5right and left on the measuringtool. The centre mark
is located 45 mm away from the top edge of the measuring tool.
Aligning with the Spirit Level
The measuring tool can be aligned vertically (plumb line) with the spirit level 8. A
measuring tool applied out-of-level leads to faulty measurements.
OBJ_BUCH-780-006.book Page 18 Tuesday, December 8, 2015 11:32 AM

English | 19
Bosch Power Tools 1 609 92A 268 | (8.12.15)
Attaching with the Holder (see figure A)
With the holder 17, the measuring tool can be fastened to a construction laser measur-
ing rod 15 (accessory) as well as to other auxiliary tools with a width of upto 65 mm.
– Screw the holder 17 to the retainer opening 12 on the rear side of the measuring
tool with fastening screw 16.
– Loosen the locking screw 13, slide the holder onto the construction laser measur-
ing rod 15, for example, and retighten the locking screw 13.
The upper edge 14 of the holder is located at the same height as the centre mark 5
and can be used for marking of the laser beam.
Attaching with the Magnet (see figure B)
Whena positive-lockattachmentisnotabsolutelyrequired, themeasuringtoolcan be
attached to steel parts via the face side using the magnet plate 4.
Maintenance and Service
Maintenance and Cleaning
– Keep the measuring tool clean at all times.
– Do not immerse the measuring tool in water or other fluids.
– Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or sol-
vents.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and re-
pair of your product as well as spare parts. Exploded views and information on spare
parts can also be found under: www.bosch-pt.com
Bosch’s application service team willgladly answer questions concerningour prod-
ucts and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit arti-
cle number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
OBJ_BUCH-780-006.book Page 19 Tuesday, December 8, 2015 11:32 AM

20 | English
1 609 92A 268 | (8.12.15) Bosch Power Tools
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a prod-
uct in need of servicing or repair.
Tel. Service: [phone]
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: [phone]
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
OBJ_BUCH-780-006.book Page 20 Tuesday, December 8, 2015 11:32 AM

English | 21
Bosch Power Tools 1 609 92A 268 | (8.12.15)
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: rbsa-hq.pt[email protected]
Disposal
Measuring tools, accessories and packaging should be sorted for environmental-
friendly recycling.
Do not dispose of measuring tools and batteries/rechargeable batteries into house-
hold waste!
Only for EC countries:
According to the European Guideline 2012/19/EU, measuring
tools that are no longer usable, and according to the European
Guideline 2006/66/EC, defective or used battery packs/batteries,
mustbe collected separatelyanddisposed ofinan environmentally
correct manner.
Batteries no longer suitable for use can be directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge UB 9 5HJ
OBJ_BUCH-780-006.book Page 21 Tuesday, December 8, 2015 11:32 AM

22 | Français
1 609 92A 268 | (8.12.15) Bosch Power Tools
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a prod-
uct in need of servicing or repair.
Tel. Service: [phone]
E-Mail: [email protected]
Subject to change without notice.
Français
Avertissements de sécurité
Il est impératif de lire et de respecter toutes les instructions. GAR-
DER PRECIEUSEMENT CES INSTRUCTIONS.
Ne pas mettre l’appareil de mesure dans la proximité de stimula-
teurs cardiaques. Les disques magnétiques 4génèrent un champ qui
peut entraver le fonctionnement de stimulateurs cardiaques.
Maintenirl’appareildemesureéloignédessupportsde donnéesmagnétiques
et des appareils réagissant aux sources magnétiques. L’effet du disque magné-
tique 4peut entraîner des pertes de donnés irréversibles.
Ne faire réparer l’appareil de mesure que par une personne qualifiée et seule-
ment avec des pièces de rechange d’origine. Ceci permet d’assurer la sécurité
de l’appareil de mesure.
Ne pas faire fonctionner les appareils de mesure en atmosphère explosive,
par exemple en présence de liquides inflammables, de gaz ou de poussières.
L’appareil de mesure produit des étincelles qui peuvent enflammer les poussières
ou les vapeurs.
Lire et respecter strictement les instructions de sécurité se trouvant dans les
instructions d’utilisation du laser rotatif.
Description et performances du produit
Dépliez le volet sur lequel l’appareil de mesure est représenté de manière graphique.
Laissez le volet déplié pendant la lecture de la présente notice d’utilisation.
OBJ_BUCH-780-006.book Page 22 Tuesday, December 8, 2015 11:32 AM