Boyo VTL375HD User manual

BOYtJ
.....
Slim Rear View Camera
INSTRUCTION
MANUAL
*
Model D VTL275
DVTL405
D VTL275HD
D VTL405HD
DVTL375
DVTL425
\21
VTL375HD
D VTL425HD
Please read this manual carefully before installation and operation
of
the product.

( Table
of
contents )
1.
Package --------------------------------------------------------
3-4
2.
Limited time warranty------------------------------------------- 5
3.
Care instructions ------------------------------------------------- 5
4.
Key Features ------------------------------------------------------ 5
5.
Dimension(inch) &Wiring ----------------------------------
6-7
6.
Specification ------------------------------------------------------ 8

1. Package
1-1. VTL275 I VTL375 I VTL275HD I VTL375HD
Slim Rear View Camera
1EA
Spring washer
4EA
1.50 L-Wrench
1EA
23ft Extension cable
1EA
Slim Rur vtew C•mera
·----· --- ... ~ ··---~~ . , ... _.,
Instruction manual
1EA
Plate washer
4EA
Adaptor cable
1EA
Warranty card
1EA
,,,
I
M6 Hex bolt
4EA
M6 Hex nut
4EA
60 Tube
1EA
IIJIU ProductRegistration
vw-T.cto~--
:::::.:=. =======-::-:'=======
""-~~-----·---- 1.1-.~- Zip ____ _
- -·-:~====
"""'""''""----- S....lll"""--~------
-·---
Registration card
1EA

1.
Package
1-2.
VTL405
I
VTL425
I
VTL405HD
/
VTL425HD
Slim Rear View Camera
1EA
Spring washer
2EA
1.50
L-Wrench
1EA
23ft Extension cable
1EA
111m
Rear
VIew
C•mera
""
--
~
-
-
·
--
-
--··-
~
~
.
....
Instruction manual
1EA
Plate washer
2EA
Adaptor cable
1EA
I
'-----
---
-·
_-
_
_jl'
-
_B!_M)·_
Warranty card
1EA
I I
M6 Hex bolt
2EA
M6 Hex nut
2EA
60
Tube
1EA
IIMT
.
Product
Reglstr•tlon
v
~
r
..
..
.-.-.u.trw.
c"Y--
--------
-----
~
uw
____
loo
____
_
~,..
__
__
- - - ---
E~
----
--
·-·
---
-
--
Mod.-
'lo
-----··-----
---
~~
til
iNe
_____
_
__
_ ___
____
_
Registration card
1EA

2. Limited time warranty
Limited time warranty applies only if care instructions are followed regularly.
In the event of defective product or workmanship, please return the item to place of
purchase.
3. Care instructions
Periodically when the frames appearance need maintenance. please take following
action to restore its original brilliant luster.
Use non abrasive mild soap detergent and water only to clean.
4. Key Features
• 175° Wide viewing angle
• 380 TVL Horizontal Resolution (VTL275 I VTL375 I VTL405 I VTL425)
• 520 TVL Horizontal Resolution (VTL275HD I VTL375HD I VTL405HD I VTL425HD)
• Remarkably True Color reproduction
• Excellent Auto White Balance
• Waterproof(IP67)
• Reverse Image
• Viewing angle adjustable up & down
*Beautiful design & anti-scratch coating
The camera design matches well with the products quality.
It looks so elegant as much as the camera quality stands for.
The unique face aims
to best fit to the environment decorative to any place.
It lasts its beautiful shape long time with scratch-free coating.

5. Dimension(inch) & Wiring
5-1. VTL275 I VTL375 I VTL275HD I VTL375HD
l
I
"'I
"<I
~I
i
1 7.01
G.N.D -~
MIRROR -
+12V-
VIDEO --
IJ
l-_ ______________ ~1=2.~3----------------~
1
M6 HEX BOLT(4PCS)
/ M6 HEX NUT(4PCS)
/ PLATE WASHER(4PCS)
~~]~__. SPRING WASHER(4PCS)
~ BUMPER OR CHASSIS
~ LICENSE PLATE
~FRAME CAMERA ASS'Y

5. Dimension(inch) & Wiring
5-2.
VTL405
I VTL425 I
VTL405HD
I VTL425HD
37
·I
s:::
II
'{0}
I
11.05
7.
01
n
n I
M6
HEX
BOLT(2PCS)
G.N
.
D3
MIRROR
+12V
VIDEO
0.
91
0.
31
M6
HEX
NUT(4PCS)
PLATE
WASHER(4PCS)
BUMPER
OR
CHASSIS
LICENSE
PLATE

6.
Specification
6-1.
VTL275 I VTL375 I
VTL405
I
VTL425
380 TV Lines
NTSC:
270K
0.3 Lux at
F2
.0
Internal
75 ohm
co
More than 48dB
1/50,1/60-1/100,000 sec
0.005%
r
=0.45
Auto.2100'
K-
9100'K
Auto. 4dB -30dB
1.56mm Board lens (175' D)
80,000 hours
Car Electric Source DC12V (Tolerance:
7V-24V)
Built-in transient impulse protection circuit
70mA w/regulated power
in
-4'F-
122'F ( -20'
C-
+50'C)
-40'F-
176'F (
-40'C-
+80'C)
Up to 90%
RH
(non-condensing)
Camera
Size:
3.70(L)X0.63(D) (Camera)
VTL275, VTL375 : 469.
5g
I VTL405, VTL425 :
259
.
5g

6. Specification
6-2. VTL275HD I VTL375HD I VTL405HD I VTL425HD
520 TV Lines
NTSC: 380K
0.1 Lux at F2.0
Internal
75 ohm
como,osi1te
More than 50dB
1/50,1/60-1/100,000 sec
0.005%
r =0.45
Auto.2100"K- 9100"K
Auto.
4dB- 30dB
1.56mm Board lens (175" D)
80,000 hours
Car Electric Source DC12V (Tolerance:7V-24V)
Built-in transient impulse protection circuit
70mA w/regulated power
in
-4 "F -122"F ( -20"C -+50"C )
-40"F- 176"F ( -40"C- +80"C)
Up to 90% RH (non-condensing)
Camera Size : 3.70(L)X0.63(0) (Camera)
VTL275HD, VTL375HD : 469.5g I VTL405HD, VTL425HD : 259.5g

Do
not
display
a
direct
view
of
the
sun
for
long
periods.
+A
burned
image
could
remain
on
the
screen.
110221-3

Vision Tech America, Inc.
1452
E. Valencia Drive
Fullerton,
CA 92831
Tel: [phone]
Place
Postage
Stamp

BOYlr
Product Registration
Vision Tech America, Inc.
Name Company
Address
City State
Zip
Phone Email:
Model No. Serial No.
Purchased Date Store Name
City/State
of Store

Limited
One
Year
Warranty
Headquarters
1452
E.
Valencia Drive
Fullerton,
CA
92831
Tel:
888-941-3060
Email:
[email protected]
VISION
Vision Tech America,
Inc.

Vision Tech America, Inc.
Limited One Year Warranty
To submit a request for warranty online, visit www.visiontechamerica.com/site/get-warranty/
This limited warranty is given to the end-user or the retail purchaser (referred to this warranty as
'briginal Purchaser') that it will be free from defects in material and workmanship for a period of one year
from the date of the purchase of the new product (excluding accessory items such as power cords, cradle,
memory card, adaptor and cables). Customer will be responsible for freight charges incurred to return the
product and will include a Cashiers Check or Money Order in the amount of $15.00 for continental U.S. or
$30 for Hawaii, Alaska, Canada and Puerto Rico, Payable to VISION TECH AMERICA, INC. to cover return
shipping and handling. A copy of the original proof of purchase and this warranty card with RMA
number given by Vision Tech America, Inc. is required to receive warranty service. In the
unlikely event that the new product should fail due to defect in material or workmanship, Vision Tech
America, Inc. will
repair or replace the entire product, where each party will be responsible for one-way
shipping.
This limited warranty does not cover any physical damage to this product, damage caused by
improper installation; improper use; misuse; neglect; repair of cracked, scratched, broken or modified
cosmetics; or parts that have been altered or removed; damages done by another device used with this
product resulting from use of non BOYO®- brand parts. This warranty is VOID if you purchased this
product as used, floor model sample, or refurbished; if the product has been altered or modified in any
way (including but not limited to attempted repair without authorization from BOYO ®- Vision Tech
America, Inc.
and/or alteration/removal of the serial number). This limited warranty does not cover the
vehicle of any damages or liabilities in which this product is installed or being installed. This product does
not guarantee avoidance of vehicle collision or accident.
If you think your product is eligible for warranty service, report to Vision Tech America, Inc. at 888-941-
3060 or email: [email protected] to receive an RMA Number with further instructions.
Model Number: Name:
Serial Number: Your address:
Date
of Purchase: City:
Purchased Store Name: State: Zip
RMA Number: Country:
Important: To send defective product for warranty service, you must receive RMA (Return Material Authorization) and include original proof
of purchase and this warranty card with the shipment.