Boyo VTL275HDL User manual

Rear View Camera
puz{y|j{pvuGthu|hs
wGGGGGGGGGGGU
* Model
G}{sY^\oks
G}{sZ^\oks
G}{s[W\oks
G}{s[Y\oks
XZW]Y^TY

ˍGpGGGGGGGGGGUG
GG{GGGSGGGGGGGGGU
ˍG{GslkGGGGGGGGGGGGGGUGG
GG{GGGGTGGGGGGGGGGGGG
GGU
ˍGtGGGGGGGGGXY}GkjGGU
ˍG~GGGGSGGGGGGGGGUGpGGG
GGSGGGGGGGGGGGGGG
GGGUGkGGGGGGVGGGGGG
GGGGSGSGSGGVGGGU
ˍG~GGGGGSGGGGGGGGGU
GGkGGGGGGGGGGGU
jaG
GXUGiGGGGGGGGGGGGGGG
GGGGGGGGGGslkGGGU
GGGGGlGGGGGGGGGGGGGGGGU
G
GYUGkGGGGslkGGSGGGGU
G
GZUG{GGGGGGGGGGGG
GGGGGGGGGGGGGGU
G
G[UG{GGGGGGGGGGU
G
G\UG{GGGGGGGGGGGG
GGGGGGU
G
G]UGpGGGGGGGGGGGU
G
G^UGkGGGGGGGU
G
G_UG~GGGSGGGGGGGGGGGG
GGGGGU
G
G`UGkGGGGGGU
XWUGkGGGGGGU
XXUGkGGGGGGGU
G
To prevent damage to the product, take the following precautions:
2 3
Before Use/ Installation Procedure
WARNING
Care and maintenance
CAUTION
ˍG{GGGGGGGGGGGGGGGGU
ˍG{GGGGGGG˅GGSGGGG
GGGGGGGGUG
GGiGGGGGGGGGGGGU
ˍG{GGGGTGSGGGGGGGGGGG
GGSGGGGGGGGUGiGGGGGG
GGGGGGU
ˍGkGGGGGGGGGGGTGGGG
GGGGGGGGGGGGU
GTGpGGGGGGGGGGGGGGGU
ˍGiGGGGSGGGGSGGGGG
GGGGSGGGGGGGU
ˍGkGGGGGGGGSGGGGGGGGSG
GGGGSGGGGGGUGOuGGGGG
GGGGGGGGGGGGGUP
ˍGiGGGGGGGGGGGGG
GGUGkGGGGGGSGGSGGGGGGU
NOTE

4 5
1. Package
Camera x1 manual x1 M6 Hex bolt x4
Spring washer x4 Plate washer x4 M6 Hex nut x4
1.5Ø L-Wrench x1 Adaptor cable x1 6Ø Tube x1
23ft Extension cable x1
Remote controller x1 Velcro tape x1
Warranty card x1 Registration card x1
Table of contents
1. Package ------------------------------------------------------------ 5
2. Recommended Installation Position --------------------- 6~7
3. Wring Connections ---------------------------------------------- 8
4. Camera Setting -----------------------------------------------8~9
5. Viewing Modes ---------------------------------------------10~12
6. Dimension(inch)-------------------------------------------- 13~14
7. Specification------------------------------------------------------15
Rear View Camera
puz{y|j{pvuGthu|hs
wGGGGGGGGGGGU
* Model
G}{sY^\oks
G}{sZ^\oks
G}{s[W\oks
G}{s[Y\oks
This limited warranty is given to the end-user or the retail purchaser (referred to this warranty as
“Original Purchaser”) that it will be free from defects in material and workmanship for a period of one year
from the date of the purchase of the new product (excluding accessory items such as power cords, cradle,
memory card, adaptor and cables).
A copy of the original proof of purchase and this warranty card with RMA number given by Vision
Tech America, Inc. is required to receive warranty service. In the unlikely event that the new product
should fail due to defect in material or workmanship, Vision Tech America, Inc. will repair or replace the
entire product, where each party will be responsible for one-way shipping.
This limited warranty does not cover any physical damage to this product, damage caused by improper
installation; improper use; misuse; neglect; repair of cracked, scratched, broken or modified cosmetics; or
parts that have been altered or removed; damages done by another device used with this product resulting
from use of non Vision - brand parts. This warranty is VOID if you purchased this product as used, floor
model sample, or refurbished; if the product has been altered or modified in any way (including but not
limited to attempted repair without authorization from Vision - Vision Tech America, Inc. and/or
alteration/removal of the serial number). This limited warranty does not cover the vehicle of any damages
or liabilities in which this product is installed or being installed. This product does not guarantee avoidance
of vehicle collision or accident.
If you think your product is eligible for warranty service, report to Vision Tech America, Inc. at
Model Number:
Serial Number:
Date of Purchase:
Purchased Store Name:
RMA Number:
Name:
Your address:
City:
State: Zip
Country:

6 7
2. Recommended Installation Position
2-1 Examples of correct camera installation
2. Recommended Installation Position
2-2 Installing the Switch Unit
ˍGyGpGGaGZUY\
1. Decide the camera installation position.
2. Clean the camera installation surface.
GGGGG|GGGGSGGSGGGGGGG
GGGGGGGGGGGGGU
3. Mount the camera on the license plate.
4. Fix the camera temporarily with screw.
5. Complete all of the required connections.
6. Display the camera video.
GGGGGzGGGGGGGGGGGUG
GGGGGmGSGGGGGGGGU
7. Change the shift lever to the R (Reverse) range to view the image of the rear of the
vehicle.
GGGGGiGGGSGGGGGGGGGGGG
GGGGGGGGUGvSGGGGGU
8. Adjust the camera angle so that the rear part of the vehicle or the rear bumper is
visible at the bottom of the monitor screen.
GGGGG~GGGGSGGGGGGGGU
9. After adjusting the camera angle, tighten the retaining screws firmly.
GGGGGpGGGGGUGpGGGSGGGU
10.Perform the operations in “Camera Setting”.
GGGGpGGGGGGGGGGSGGGG
GGGGGGU
11.Fix the camera firmly in position.
G1. Clean the switch unit installation surface.
GGGGG|GGGGSGGSGGGGGGG
GGGGGGGGGGGGGGU
G
2. Attach velcro tape on the bottom of the switch unit and then attach it in an
easy-to-operate position, for example near the dashboard on the driver seat side.
Installation position
ଝଝଝ

8 9
{GGGGGGGGGGGSGVGGG
GGGGU
1. Stop the vehicle.
pGGGGGGGGGSGGGGGGGG
GGGU
2. Advance the vehicle.
GGˍGtGGGGGGGGGGGGGGG
GGGGU
GGˍGiGGGGGGGGGGGGGGGGG
GGGGGUGwGGGGGGGGGGGG
GGGGGU
3. Wring Connections 4. Camera Setting
3-1. Basic Connections
4. Camera Setting
4-1. Switch Unit Operation
4-2. Preparation Before Camera Setting
Video cord
wv~lyGOyGRGP
OiGTGP

10 11
5. Viewing Modes 5. Viewing Modes
(Mirror Off) (Mirror On)
(Defog Off) (Defog On)
(ACCE Off) (ACCE On)
Viewing mode #1 (LDC)
(Factory Default) Viewing mode #2
(Split screen)
Viewing mode #3
(Top view) Viewing mode #4
(LDC with parking lines)
Viewing mode #5
(Split Screen with parking lines)
5-1. Use the “SET” button to cycle through the different viewing modes. 5-2. Features on/off
Viewing mode #6
(Top view with parking lines)
Turning on and off the mirror imaging
While the camera is on any of the viewing modes 1 through 6, press the “LEFT” button to turn
on or off the mirror imaging.
Turning on and off the defog feature
While the camera is on any of the viewing modes 1 through 6, press the “RIGHT” button to
turn on or off the defog feature.
Turning on and off the ACCE feature
While the camera is on any of the viewing modes 1 through 6, press the “UP” button to turn
on or off theACCE feature.

12 13
5. Viewing Modes 6. Dimension(inch)
G
(LED Off) (LED On)
Turning on and off the LED lights
While the camera is on any of the viewing modes 1 through 6, press the “DOWN” button to
turn on or off LED lights.
5-3. How to adjust the parking lines
While in the desired viewing mode with the parking lines (Viewing modes 4 through 6),
by pressing the “SET” button, then the green lines will blink. Use the “LEFT” and “RIGHT”
buttons to either shrink or expand the lines. After finish, press the “SET” button to move
onto the yellow lines. While the yellow lines are blinking, use the “LEFT” and “RIGHT”
buttons to shrink or expand the lines. Then press the “SET” button to move onto the red lines.
While the red lines are blinking, use the “LEFT” and “RIGHT” buttons to shrink or expand the
lines. Then press “SET” to move onto the all the lines. While all the colored lines are blinking,
use the “LEFT” and “RIGHT” buttons to shift the entire lines up and down. To save your
settings, hold down “SET” button for three seconds. Saving options will be prompted on the
screen. Select the save option and exit by pressing “SET” button.
(1.13)
7.01
11.05
0.31
1.12

14 15
6. Dimension(inch)
7.01
12.3
0.31
(1.13)
4.72
6.39
7. Specification
QGzGGGGGGGGGU
MO
DEL
Power source
Model
Scanning system
H.Resolution
Min.Illumination
White Balance
Smear effect
Gamma
correction
LED Control
Gain Control
ACCE
SENSOR
Function
Image sensor
S/N Ratio
Gain Control
VTL275HDL,VTL375HDL,VTL405HDL,VTL425HDL
DC12V(Tolerence : 10V~20V -> Inrush voltage 24V Max)
70mA(LED Off), 580mA(LED On)
1/3.7" progressive scan CMOS
Progressive scan
720 x 480
AUTO
50dB(AGC OFF)
0.2Lux at F1.2(LED Off), 0Lux at F1.2(LED On)
0.005%
r=0.45
$:%Û.aÛ.
AUTO(1/30 ~ 1/30,000)Shutter Speed
ON
ON / OFF
ON / OFF
DNR
ON / OFF
AUTO
Default ONLDC
ON / OFF
ON / OFF
H-REV(Mirror)
H-2Partition
DEFOG
H-2Partition+PGL
TOP VIEW+PGL
Day & Night
ON / OFFLDC+TOP VIEW
AUTO
Only COLOR
PP%RDUG/HQVÛ'
IRIS Control
ON / OFF(PGL Adjustable)
ON / OFF(PGL Adjustable)
ON / OFF(PGL Adjustable)LDC+PGL
20,000 hours
-10℃to +50℃/ Under 90% Non-condensing
-20℃to +60℃/ Under 90% Non-condensing
MTBF
Operation Temperature/Humidity
Storage Temperature/Humidity
LENS
Other manuals for VTL275HDL
1
This manual suits for next models
3
Table of contents
Other Boyo Automobile Accessories manuals
Popular Automobile Accessories manuals by other brands

aFe Power
aFe Power 54-12208 manual

Cruz
Cruz Evo Rack Alu A23-126 Assembly instructions

Michelin
Michelin 12290 quick start guide

Cruz
Cruz Evo Rack Pro P30-140 Assembly instructions

Magnat Audio
Magnat Audio PRO CHARGER Owner's manual/warranty document

FACTORY UTV
FACTORY UTV Dual Clamp Spare Tire Mount installation guide

Metra Electronics
Metra Electronics 99-7612A installation instructions

Metra Electronics
Metra Electronics 99-6536 installation instructions

Directed
Directed DBALL installation guide

TEINHOF
TEINHOF R-074 FITTING AND OPERATION MANUAL

Parrot
Parrot 3200 LS-COLOR PLUS user manual

Hella
Hella Comet FF 200 Mounting instructions