Boyo VTM43ML User manual

VTM43ML
VTM43MW (Miracast WiFi Dongle included)
User’s Manual
4.3” Rear View Mirror Monitor
With Smartphone Mirroring

4.1 Remove the original car factory mirror
Car factory original mirror The plate on the windshield
1
Package Content
2 Features
3 Specification
4 How to install mirror monitor
The packing box contains the following accessories, please confirm:
Rear view mirror monitor (1)
Main harness (1)
Wire cover (1)
Zip ties (6)
Remote control and battery (1)
USB Cable
HDMI to MHL adapter cable (1)
Universal Windshield adapter mount metal base (1)
Mounting Bracket Arm (1)
Miracast WiFi dongle (VTM43MW only)
L-Shape HDMI-to-HDMI cable (VTM43MW only)
Back up camera display
Automatic brightness adjustment
0.16 inch glass and car factory OEM bracket
Adjustable Back up guide line
Wireless Miracast compatible with Android/ iOS
smartphones (optiona l with dongle)
Screen Size: 4.3 inch
Display Screen: TFT-LCD
Aspect Resolution:
480(H) X 272(V) (4.3inch)
Working Voltage: DC 12V
Three video Inputs: Two RCA video Inputs
one HDMI Input ( Reverse trigger wire)
Signal System: PAL / Auto / NSTC

4.2 Install mirror monitor on the plate
When the camera needs to be installed at the rear of vehicle, a good
position is usually at the top of the license plate where there is an under
ledge.
vehicle. There are many methods to remove the original rear view
Tech America, Inc. will not be responsible for any damage caused to
your car by improper installation of the mirror.
5
How to Install Reverse Camera
Rearview mirror monitor
1BAM 2XX
Camera
License Plate
General installa on loca on
Two ball joints bracket Screw (M5X19) Adapter Screw (M6X8) Long Screwdriver Short Scredriver
Put the screw(M5*19) in the
pipeline of the two ball joints
bracket
Connecting the two ball joints
bracket and rearview mirror by
using the screw and screwdriver
Rotate the screwdriver clockwise,
and x the two ball joints bracket
and rearview mirror
Finish the rst step, then need to
x the adapter to bracket
Connecting the rearview mirror
bracket and adapter, then xed
the screw of adapter
Clockwise rotary screwdriver, to
ensure the bottom block is xed
tightly on the bracket

After the mirror is mounted, you need to run the cable along the roof
lining and down the pillar so you can connect to power and the rear
view camera.
Rear view mirror monitor
6
78
9
3
1
5779
9
8
Mirror monitor power harness
Car camera extension cable Camera (not included)
Video in 1
Green wire to back up light 12V DC
5
3
To back up camera Video 2
Red wire to ACC +12V
Black wire to GND
3
5
33
Connect
Please align the connectors
at each other, otherwise the
connector will be easy to break.
Red: Camera power to reverse power 12VDC
Black to GND
16.4 feet cable
Connections
6

13
5
7
8
2
4
6
23
45
5
7
6
8