Bradley Verge LVQ Series User manual

Installation
P.O. Box 309
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
[phone]
bradleycorp.com
215-1842 Rev. M: ECO 22-08-038
© 2022 Bradley
Page 1 of 42 11/21/2022
LVQD1
Verge®Lavatory System – LVQ-Series
with WashBar™Technology
Read the instructions in this manual before
beginning installation. Save these instructions
and refer to them for inspection, maintenance,
and troubleshooting information.
For questions regarding the operation, installation or maintenance of this
product, visit bradleycorp.com or call 800.BRADLEY (800.272.3539).
Product warranties and parts information may also be found under
“Resources” on our website at bradleycorp.com.
Shown with WB1
Shown with WB2
Table of Contents
Safety Information .............................................................2
Supplies Required .............................................................2
Components ......................................................................3
Dimensions........................................................................7
Rough-Ins ........................................................................12
Bracket Mounting.............................................................16
Drain Assembly ...............................................................16
Basin Bracket for Access Panel Installation
(Evero Matte – Mason Series Bowl only)........................17
WashBar Installation .......................................................18
Aerator Installation...........................................................18
Top Fill Soap – Mount Tank Assembly & Control Box .....19
Top Fill Soap – Control Box & Soap Supply
Connections.....................................................................19
Top Fill Soap – Tank Assembly (Part 1) ..........................20
Bowl Mounting with WashBar (to Bracket & Wall)...........23
Top Fill Soap – Tank Assembly (Part 2) ..........................24
Bottom Fill Soap – Attach Soap Motor &
Soap Container Bracket ..................................................25
Strainer and Standard Drain Cap....................................26
Strainer and Slotted Drain Cap .......................................26
Dryer Motor Assembly.....................................................27
Attach Power Line Filter ..................................................28
Control Box and Valve Installation...................................28
Top Fill Soap – Soap Installation.....................................29
Bottom Fill Soap – Soap Installation ...............................33
Electrical Connections .....................................................34
Adjust Temperature with Water Running .........................34
Access Panel...................................................................35
Master Control Box..........................................................36
Software Update..............................................................40
Displaying Software Revision and
Cycle Counts on LCD Display .........................................40
Cleaning and Maintenance..............................................41
Liquid Soap Recommendations and
Dispenser Maintenance...................................................42

LVQD1 Installation
211/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
WARNING
Make sure that all water supply lines have been flushed and then completely turned off before beginning
installation. Debris in supply lines can cause valves to malfunction.
Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation. Electrical
power MUST remain off until installation is complete.
Installer’s hardware must be appropriate for wall construction. Wall anchors must have a minimum pull-out
rating of 1,000 pounds.
IMPORTANT
Read this entire installation manual to ensure proper installation. When finished with the installation, file this
manual with the owner or maintenance department. Compliance and conformity to local codes and ordinances
is the responsibility of the installer. Product warranties may be found under “Products” on our Website at
www.bradleycorp.com.
Separate parts from packaging and make sure all parts are accounted for before discarding any packaging
material. If any parts are missing, do not begin installation until you obtain the missing parts.
For standard height mounting, do not exceed the recommended 33.5" distance from the fixture rim to the
finished floor.
Troubleshooting and internal maintenance must be performed by qualified service personnel.
Supplies Required
• (4) ³/₈" fasteners and wall anchors for bowl and wall bracket (minimum pull-out rating of 1,000 lb)
• (4) #10 fasteners and wall anchors for "S" and "S1" soap tank brackets (minimum pull-out rating of 100 lb)
• (4) #10 fasteners and wall anchors for access panel brackets (minimum pull-out rating of 100 lb)
• (2) #8 fasteners and wall anchors for dryer motor vibration pad (minimum pull-out rating of 100 lb)
• ½" hot/cold or tempered stub-out
• 1¹/₂" NPT drain stub-out(s)
• (1) Dedicated 120 VAC, 15A GFCI outlet
• Drill
• Basin wrench
• Tape measure
• Phillips screw driver
• Flat head screw driver
• Level
• ⁵⁄₁₆" nut driver
• ⁵⁄₁₆" socket (with or without extension)
Safety Information

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 3
Components
LVQD1BO
Contact your Bradley Representative for
color and drilling options
Chrome P-Trap (S29-094)
Plastic P-Trap (269-1697)
O-Ring
(125-111)
Drain
Adapter
Packing
Washer
#10-24
Screw
Drain Adapter
Prepack
(S45-2480)
Access Panel
Stainless Steel (Standard)
(186-1911)
Stainless Coated Black
(186-1911-BLK)
Stainless Steel Cut for Cam Locks
(186-1945)
Stainless Steel Cut for Cam Locks
Coated Black
(186-1945-BLK)
Wall Bracket
(140-1153)
DC Lead Free Valve
Assembly, Single TMA
(S08-2401TMA)
DC Lead Free Valve
Assembly, Single TL
(S08-2401TL)
Master Control Box
(S39-845)
#10 x ³/₈" Screw (2x)
(P18-054)
DC Power
Adapter
(261-147)
Access Panel Wall Bracket
(140-1172)
#10 Access Panel Thumb
Screw
(160-536)
Access Panel Security
Screw Option
(S45-2880)
Strainer Kit with Screws
(S65-473)
Drain Cap with Spacers
(S65-476)
Drain Cap (Slotted)
with Spacers
(S65-476A)
Hose/90 Stop Lead Free TMA
(S45-2730)
Hose/90 Stop Lead Free TL
(S45-2731)
Grounding Washer ¹/₄"
QC (230-035)
Ground Wire Assembly
¹/₄" Quick Type B Outlet
(S83-423)
Grounding Kit, WashBar
(S65-493)
Evero Matte - Mason Series Bowl
Basin Bracket for Access Panel
(140-1256)

LVQD1 Installation
411/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
WB1 Service Kits (Incl. castings, shanks, deck
gaskets, and LED bar)
S65-506-PC (Polished Chrome)
S65-506-BB (Brushed Black SS)
S65-506-BN (Brushed Nickel)
S65-506-BR (Brushed Brass)
S65-506-BS (Brushed Stainless)
S65-506-BZ (Brushed Bronze)
WB2 Service Kits (Incl. casting, shanks, deck gaskets, and LED bar)
S65-505-PC (Polished Chrome)
S65-505-BB (Brushed Black SS)
S65-505-BN (Brushed Nickel)
S65-505-BR (Brushed Brass)
S65-505-BS (Brushed Stainless)
S65-505-BZ (Brushed Bronze)
Union Tube, ¹/₄" OD
(269-624)
¹/₄" x 60 Tubing (269-547C)
For Service - 1’ Increments (R68-600011)
¹/₄" x 60 Tubing (269-547C)
For Service - 1' Increments
(R68-600011)
Elbow, ¹/₄x 3.4mm
Hose Barb (145-221)
Elbow, ¹/₄x 3.4mm Hose Barb
(145-221)
Gasket WashBar
Deck, Soap Side
(124-101)
Soap Tube
5.5mm OD x 70cm long
(269-2522)
Soap Tube
5.5mm OD x 70cm long
(269-2522)
Access Plate Soap
Assembly Kit
(S65-479)
Aerator 0.50 GPM (S05-175)
Aerator 0.35 GPM (S05-215)
(Aerators are shipped loose in
bag with red service key)
Aerator 0.50 GPM (S05-175)
Aerator 0.35 GPM (S05-215)
(Aerators are shipped loose in
bag with red service key)
Nut, WashBar, 1³/₈-18
(110-256)
Nut, WashBar, 1³/₈-18
(110-256)
Nut, WashBar, 1³/₈-18
(110-256)
WashBar Grounding Kit (S65-493)
Ground Wire Assembly
¹/₄" Quick Type B Outlet
(S83-423)
Grounding Washer ¹/₄" QC
(230-035)
Ground Washer Assembly Kit
¹/₄" QC to Type B Outlet
(S65-493)
Gasket, WashBar Deck, Air
Side (124-102)
Gasket, WashBar Deck, Air Side
(124-114)
Spacer, Custom WB2
(182-142)
Access Plate Hardware Kit
(S65-481)
Access Plate Hardware Kit
(S65-504)
Access Plate Air Water
Assembly Kit (S65-480)
Access Plate Assembly Kit
(S65-503)
Union Elbow
(269-2531)
Union Elbow
(269-2531)
Nut, WashBar,
1³/₈-18
(110-256)
WashBar Components
WB1
WB2

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 5
Dryer Motor Components
Hose Clamps - 2-1/2" Dia
(269-678) Flexible PVC
Dryer Tube
(269-2561A)
Dryer Motor
(S39-859)
Dryer Vibration Pad
4" x 10"
(124-105)
(not shown)
Hook and Loop Strap
(not shown)
(269-2574)
Exit Nozzle,
Brushed Blower
(S65-526)

LVQD1 Installation
611/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
Soap System Components – Top Fill Option
WashBar Top Fill Multi-Feed
Control Box
(Includes pump assembly)
(S52-171 – Foam)
(S52-170 – Liquid)
Allen Key,
3 mm (5 pk)
(P15-530)
Spacer
(269-2844)
WashBar Top Fill
Soap Pump
(Foam w/Tube)
(P15-587)
WashBar Top Fill
Soap Pump
(Liquid w/Tube)
(P15-565)
OR
Top Fill Soap
Tank Assembly
(A14-028)
Power Supply
Battery Pack w/
Batteries
(P15-030)
Multi-Feed Cap and Ring
A14-027-PC (Polished Chrome)
A14-027-BB (Brushed Black SS)
A14-027-BN (Brushed Nickel)
A14-027-BR (Brushed Brass)
A14-027-BS (Brushed Stainless)
A14-027-BZ (Brushed Bronze)

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 7
Soap System Components – Bottom Fill Option
(mm)Dimensions
Control Box Assembly with
Liquid Pump (S52-168)
Control Box Assembly with
Foam Pump (S52-169)
Gallon Jug
(S65-528)
(May be supplied by
others)
Soap Tank Bracket
(140-1171)
Hook & Loop Strap
(269-2574)
Liquid Pump with External
Rubber Sleeve Connection
(269-2518)
Foam Pump with Internal Press
Fit Connection
(269-2519)
15½"
(394)
13¼"
(337)
6⁵⁄₈" (168)
12"
(305)

LVQD1 Installation
811/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
Dimensions – WB1 (mm)
Top View
Front View
20" (508)
29¾" (756)
20"
(509)
5" (127) 5" (127)
30" (762)
3¾" (95)
26¾" (681)
21"
(533)
5½"
(140)
1½" (40)
14³⁄₈"
(366)
2x Ø 1⁷⁄₁₆" (37)
13½" (343)
2¾" (70)
11" (279)
2¾" (70)
Top Fill Soap
Option
2⁵⁄₈" (67)
5"
(127)

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 9
Dimensions – WB2 (mm)
Top View
Front View
20" (508)
29¾" (756)
20"
(509)
5" (127) 5" (127)
30" (762)
3¾" (95)
26¾" (681)
21"
(533)
5½" (140)
14³⁄₈"
(366) 2x Ø 1⁷⁄₁₆" (36)
13½" (343)
2¾" (70)
Top Fill Soap
Option
1¾" (44)
5" (127) 8¼"
(210)
2⁵⁄₈" (67)
6"
(153)

LVQD1 Installation
10 11/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
Dimensions – WB1 (mm)
A
B
12³⁄₈" (314)
Dryer
11¾" (299)
Faucet
C
3⁵⁄₈"
(92)
21" (534)
ADA/TAS Standard
Height
ADA/TAS Juvenile Height
(Children 6-12 years)
Dim A 33½" (851) 30½" (775)
Dim B 27" (686) 24" (610)
Dim C 13½" (343) 10½" (267)
20"
(507)
7½"
(189)
3¾"
(95) 6½" (165)
20°
3⁷⁄₈" (99)
A
B
12³⁄₈" (314)
Dryer
11¾" (299)
Faucet
C
3⁵⁄₈"
(92)
21" (534)
20"
(507)
7½"
(189)
3¾"
(95)
6½" (165)
20°
3⁷⁄₈" (99)
28¹⁵⁄₁₆"
(735)
CSA Standard Height
Dim A 33½" (851)
Dim B 29²⁹⁄₃₂" (760)
Dim C 13½" (536)
Side View

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 11
Dimensions – WB2 (mm)
A
B
13" (326)
Dryer
12³⁄₈" (299)
Faucet
C
3⁵⁄₈"
(92)
21" (534)
ADA/TAS Standard
Height
ADA/TAS Juvenile Height
(Children 6-12 years)
Dim A 33²⁄₅" (848) 30½" (775)
Dim B 27" (686) 24" (610)
Dim C 13½" (343) 10½" (267)
20"
(507)
7½"
(189)
3¾"
(95) 6½" (165)
20°
4¼" (107)
A
B
C
20"
(507)
7½"
(189)
3¾" (95)
6½" (165)
20°
28¹⁵⁄₁₆"
(735)
CSA Standard Height
Dim A 33½" (851)
Dim B 29²⁹⁄₃₂" (760)
Dim C 13½" (536)
Side View
21" (534)
3⁵⁄₈"
(92)
4¼" (107)
13" (326)
Dryer
12³⁄₈" (299)
Faucet

LVQD1 Installation
12 11/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
Structural Rough-In – Bowl & Access Panel (mm)
31½"
(800)
AA
BB
10" (254)
C
L
29⁵⁄₈" (753)
Bottom of
Bracket
CODE DESCRIPTION QTY.
A Install (1) ³/₈" wall anchor with a minimum pull-out force of 1,000 lb per local codes at locations shown. 2
B Provide structural backing compliant with local building codes. 2
C Install wall anchor with a minimum pull-out force of 100 lb per local codes at locations shown. 4
* Measured from center of top slot on access panel wall bracket
Wall Bracket
RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE
33½" No Adjustment Standard Height ADA, TAS, and CSA
30½" Subtract 3" Juvenile ADA and TAS
CC
25¼"
(654)
14¼"
(362)
33½"
(851)
15³⁄₈" *
(390)
12⁵⁄₈" (320) 12⁵⁄₈" (320)
10" (254) 10" (254)
Access Panel
Wall Bracket
9¹⁄₈" (231) 9¹⁄₈" (231)
Finished Floor
Access Panel
Wall Bracket
WARNING Ensure bowl is completely seated in the wall bracket
and securely fastened to the wall at point A.
Mounting for Standard ADA and TAS height shown.
Points A, B, and C (highlighted in gray) require sufficient
backing compliant with local building codes.
Refer to Step 1: Bracket Mounting on page 16 for instructions on mounting the wall bracket.

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 13
Plumbing and Electrical Rough-In (mm)
Mounting for Standard ADA and TAS height shown.
CODE DESCRIPTION QTY.
A 1¹/₂" NPT Drain, Stub-out 2" from wall 1
H,C ¹/₂" Nominal (⁵/₈" O.D. Comp.) Hot/Cold supplies, Stub-out 2" from wall 1
EDedicated 120 VAC, 15A GFCI minimum outlet must be provided, which is properly grounded and no more than 4 ft from
the installation of the dryer assembly.* 1
* If no GFCI outlet is provided, contact a licensed electrician to assure proper electrical connections in accordance with local building codes.
Troubleshooting and internal maintenance must be performed by qualified service personnel.
33½"
(851)
10" (254)
23¾"
(603)
A
E
H C
2¼" (57)
1" (25)
Finished Floor
17½"
(444)
Min.
Tempered
Supply

LVQD1 Installation
14 11/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
Structural Rough-In – Top Fill Soap (mm)
C
L
CODE DESCRIPTION QTY.
T #10 Wall Anchors for Top Fill Soap Tank Mount 1
T2 #10 Wall Anchors for Top Fill Soap Pump Mount 2
RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE
33½" No Adjustment Standard Height ADA, TAS, and CSA
30½" Subtract 3" Juvenile ADA and TAS
Finished Floor
5"
(127)
⁹⁄₁₆" (14)
T2 T2
T
8¼" (209)
28"
(711)
19¹⁄₁₆"
(483)
WARNING Ensure bowl is completely seated in the wall bracket
and securely fastened to the wall at point A.
Mounting for Standard ADA and TAS height shown.
Points T and T2 require sufficient backing compliant with
local building codes.

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 15
Structural Rough-In – Bottom Fill Soap (mm)
C
L
CODE DESCRIPTION QTY.
S #10 Wall Anchors for Soap Control Box Bracket 2
S1 #10 Wall Anchors for Soap Tank Bracket (100 lb pull out) 2
* Measured from center of top slot on access panel wall bracket
RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE
33½" No Adjustment Standard Height ADA, TAS, and CSA
30½" Subtract 3" Juvenile ADA and TAS
Finished Floor
5"
(127)
2½"
(64)
S S
5½"
(140)
S1 S1
28"
(711)
2¼" (57)
13¼"
(337)
WARNING Ensure bowl is completely seated in the wall bracket
and securely fastened to the wall at point A.
Mounting for Standard ADA and TAS height shown.
Points S and S1 (highlighted in gray) require sufficient
backing compliant with local building codes.

LVQD1 Installation
16 11/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
Bracket Mounting
Typical installation is shown. It may be necessary to repair the wall after mounting.
The fixture may not cover all of the wall modifications.
1
Mounting height per Structural Rough-In – Bowl & Access Panel drawing on page 12.
5" (127mm) min.
C
L
2Drain Assembly
For ease of drain installation, lay the bowl on its back.
O-Ring
Drain
Adapter
Packing
Washer
#10-24 X 1/2"
Screw
Assemble the remaining components as shown and
thread the four screws through the drain adapter and
into the basin inserts. Ensure the screws compress the
drain adapter evenly onto the basin. Do not overtighten.
A
The anchor bolt to the right of centerline must be a
minimum of 5" apart from the anchor bolt located to the
left of the centerline. See drawing below.
Secure wall bracket to wall using a minimum 3/8" anchor
bolt to the left of the centerline and a minimum 3/8"
anchor bolt to the right of the centerline.
AWhen mounting is complete, verify the bracket is
level. Adjust as needed.
B
Anchor Location Example

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 17
Basin Bracket for Access Panel Installation
(Evero Matte – Mason Series Bowl only)
3
Attach the two supplied basin brackets for access panel
(140-1256) using the #10 fasteners provided into the
two threaded insert locations on the bowl.
A
#10 Fasteners
Evero Matte – Mason Series
Basin Bracket for Access Panel
Evero Matte – Mason Series
Basin Bracket for
Access Panel Locations
Cam lock is shown.
Thumb screw fastener is similiar.

LVQD1 Installation
18 11/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
WashBar Installation – WB1 & WB2
4
Assemble WashBar through basin
WashBar holes. Run cables and
tubes on left side only.
BFor WB1 & WB2: Secure
from underside with (2)
nuts and (1) grounding
washer (right side only).
For WB2 Only: Install the
custom spacer (182-142)
between deck and nut
(left side only) with spacer
groove side up against
deck. Refer to page 4.
C
WashBar
Grounding Washer,
0.25 QC
Nut, WashBar,
1³⁄₈-18
Connect grounding wire spade
terminal end to grounding washer
tab. Do not attach grounding wire
plug adapter to wall outlet until later
in the installation procedure.
E
Position bowl on the
floor, upright, as shown.
A
Soap Tube (Clear), ¹/₄" Water Tube,
LED Cable (Gray), Soap Sensor
Cable (Shorter Cable), and Air/
Water Cable (Longer Cable)
Aerator Installation – WB1 & WB2
5
Red Service Key
Aerator
(0.35 gpm or
0.5 gpm)
Carefully thread the aerator into
the WashBar casting using the red
service key provided. Ensure no
leaks after installation.
A
WashBar comes pre-assembled,
with the exception of the aerator.
WB1 is shown for these instructions.
WB1 is shown for these instructions.
Attach flexible PVC dryer
tube to shank using
hose clamp. Tighten
to 30–35 in-lb using a
5/16" socket.
D
Attach the ¹/₄" supply tube
to the ¹/₄" union elbow.
F
When attaching flexible PVC
dryer tube, be sure tube is
touching the WashBar nut
when complete.

Installation LVQD1
Bradley • 215-1842 Rev. M: ECO 22-08-038 11/21/2022 19
Top Fill Soap – Mount Tank Assembly & Control Box
Top Fill Soap – Control Box & Soap Supply Connections
6
7
Ensure the control box assembly is level, and
then use a pencil to mark two top mounting
hole locations (two bottom mounting holes are
optional) on the wall.
B
Drill the two 1/4" diameter mounting holes
into the wall or surface, using a drill and
appropriate drill bit.
C
Optional
Mounting
Holes
1/4"Dia.
Mounting
Hole
Locate the mounting position for the control
box assembly per the rough-in on page 14.
A
Use the supplied mounting screws (or suitable
mounting hardware) to attach the control box
assembly in place.
D
Refer to the Structural Rough-In – Top Fill Soap
drawing on page 14 before mounting the soap
tank assembly and the control box.
Appropriate fastener anchors and mounting
hardware must be used when mounting the
control box assembly in the desired surface.
Soap Supply Tube
from WashBar
Verify the soap pump is positioned below
the control box lever.
A
Press the soap supply tube over the
soap pump connection as shown.
C
Verify the shoulder of the soap pump is
positioned above the control box groove.
B
IR Sensor Connection
from WashBar Master
Controller
Follow Steps 6–9 for top fill soap option installation instructions.
Skip to Step 9 for bottom fill soap option installation instructions.

LVQD1 Installation
20 11/21/2022 Bradley • 215-1842 Rev. M: ECO 22-08-038
Soap Overflow
Sensor (Black)
Soap Tank
Remove hook & loop strap allowing the soap
tank to be removed from the mounting bracket.
B
Carefully disconnect all connections from the
multi-feed tank control box.
A
LED Connector
(White)
Power Supply
Connection
Low Soap Level
Sensor (Red)
Top Fill Soap – Tank Assembly (Part 1)
8
Hook & Loop Strap