Braun SATIN ST 750 User manual

Satin
Hair
7 Colour
Satin·Hair 7
ST 750
99571424_ST750_China.indd 1199571424_ST750_China.indd 11 19.05.2010 13:48:43 Uhr19.05.2010 13:48:43 Uhr

2
fine
thick
normal
fine
thick
normal
fine
thick
normal
AB C
D
GH
J
99571424_ST750_China.indd 299571424_ST750_China.indd 2 19.05.2010 13:48:38 Uhr19.05.2010 13:48:38 Uhr

3
Satin Hair 7 Colour
fine
thick
fine
thick
normal
auto off
normal
satin hair colour
DEF
I
99571424_ST750_China.indd 399571424_ST750_China.indd 3 19.05.2010 13:48:39 Uhr19.05.2010 13:48:39 Uhr

4
99571424_ST750_China.indd 499571424_ST750_China.indd 4 19.05.2010 13:48:39 Uhr19.05.2010 13:48:39 Uhr

5
99571424_ST750_China.indd 599571424_ST750_China.indd 5 19.05.2010 13:48:40 Uhr19.05.2010 13:48:40 Uhr

6
99571424_ST750_China.indd 699571424_ST750_China.indd 6 19.05.2010 13:48:40 Uhr19.05.2010 13:48:40 Uhr

7
99571424_ST750_China.indd 799571424_ST750_China.indd 7 19.05.2010 13:48:41 Uhr19.05.2010 13:48:41 Uhr

8
English
Please read these use instructions carefully before use and
keep them for future reference.
Important
Plug your appliance into an alternating current outlet only
and make sure that your household voltage corresponds
to the voltage printed on the appliance.
This appliance must never be used near water (e.g. a
filled wash basin, bathtub or shower). Do not allow the
appliance to get wet.
For additional protection, it is advisable to install a residual
current device (RCD) with a rated residual operating
current not exceeding 30 mA in the electrical circuit of
your bathroom. Ask your installer for advice.
This appliance is not intended for use by children or
persons with reduced physical, sensory or mental
capabilities, unless they are given supervision by a person
responsible for their safety. In general, we recommend that
you keep the appliance out of reach of children. Children
should be supervised to ensure that they do not play with
the appliance.
Avoid touching the hot parts of the appliance.
When hot, do not place on surfaces that are not heat-
resistant.
Do not wrap the mains cord around the appliance.
Regularly check the mains cord for wear or damage. If the
cord is damaged, stop using the appliance and take it to
an authorized Braun Service Centre. Unqualified repair
work can lead to extreme hazards for the user.
The appliance should be used on dry hair only.
Be careful when using the appliance at maximum
Be careful when using the appliance at maximum
temperature.
temperature.
Description
1 Cool touch
2 Display
3 Hair type selector («–/+»)
4 «boost» button
5 on/off button
6 Swivel cord (2 m length)
7 Ion jets
8 NanoGlide Ceramic plates
Colour Saver Technology
Colour Saver Technology with satin ions maintains the
precious health of colored hair as it protects your hair from
dry out and damage and prevents moisture loss of coloured
hair by up to 50%* while styling. As satin ions are released
onto your hair a slight crackling noise can be heard.
For beautiful smooth and sleek hair that looks more healthy
and radiantly vibrant for longer.
* compared to usage of an appliance without Colour Saver
Technology
Getting started
Connect the appliance to an electrical outlet and push the
on/off button (5) for 1 second to turn it on.
During heat up, the display turns orange/red. The appli-
ance is delivered with a default setting for normal hair,
medium. The thermometer symbol is flashing [A] as long
as the temperature for the displayed setting is not
reached.
After approx. 30 seconds, the display turns green to
indicate that you can start using the appliance. As soon
•
•
•
•
•
•
•
•
•
•
•
•
99571424_ST750_China.indd 899571424_ST750_China.indd 8 19.05.2010 13:48:42 Uhr19.05.2010 13:48:42 Uhr

9
as the temperature for the selected setting is reached, the
thermometer symbol stops flashing.
Personalized settings: Using the hair type selectors (3),
you can adjust the temperature for fine, normal and thick
hair. Within each hair type, you have the choice between
a low, medium and high setting.
When changing the hair type setting, the display turns
orange/red and the thermometer symbol flashes again.
When the display turns green, you can go ahead with
styling.
«boost» function: For handling difficult hair strands, you
can instantly increase the operating temperature by
pushing the «boost» button (4). For 20 seconds, the
appliance will increase its temperature by 20 °C with the
backlight flashing. Afterwards, the appliance switches
back to the previously selected temperature.
Safety auto off: For safety reasons, the appliance
automatically switches off after 30 minutes. Five minutes
prior to switching off, the display shows «auto off» [E]
along with a red flashing backlight. If you want to keep on
straightening, simply press the on/off button (5) again
shortly.
Memory function: In order to make your styling session as
convenient and quick as possible, the appliance stores
your last personalised settings for the next usage.
Styling
Preparation
Make sure your hair is completely dry before using the
appliance.
First, comb your hair through with a wide toothed comb to
remove tangles [G].
Section your hair off. Starting close to the roots, take a
thin section of hair (strands of 3–4 cm maximum) and
clamp it firmly between the styling plates [H].
How to straighten your hair
Gently run the straightener through the entire length of the
hair, slowly and steadily, from roots to the ends [I] without
stopping for longer than 2 seconds. This will ensure best
straightening results without damaging your hair. Since the
NanoGlide Ceramic plates are 3 times smoother than
conventional ceramic plates, they protect your hair from
damage by providing friction-free gliding.
For improved control when gliding along a strand, you
may stabilise the appliance by holding it with the other
hand on the cool touch points (1).
You can create flicks at the hair ends by slowly turning the
appliance either outwards or inwards before releasing a
strand.
How to form curls
With the Braun satinliner, you can also create loose curls and
waves [J]:
– Clamp a strand at the roots,
– turn the appliance half a turn,
– then slowly move the appliance horizontally towards hair
ends and the strand will turn into curl.
After use
After each use, switch off the appliance by pushing the
on/off button (5) for 1 second.
Residual heat indicator
As long as the appliance is not unplugged, the display turns
red and shows the cooling down symbol [F] during the
cooling down phase. Only when the temperature has
dropped below 60 °C, the display switches off and you can
touch the appliance without any risk.
•
•
•
•
•
•
•
•
•
•
•
99571424_ST750_China.indd 999571424_ST750_China.indd 9 19.05.2010 13:48:43 Uhr19.05.2010 13:48:43 Uhr

10
Cleaning
Always unplug before cleaning. Never immerse the appliance
in water.
Clean the appliance with a damp cloth and use a soft cloth to
dry.
Subject to change without notice.
Please do not dispose of the product in the household
waste at the end of its useful life. Disposal can take
place at a Braun Service Centre or at appropriate
collection points provided in your country.
99571424/V-10
China/GB
99571424_ST750_China.indd 1099571424_ST750_China.indd 10 19.05.2010 13:48:43 Uhr19.05.2010 13:48:43 Uhr