Breas Z2 Auto User manual

Z2 Auto
Patient Quick Start Guide
If you have any questions, consult the Z2 Auto User Guide, email us at supportUS@
breas.com or call Customer Support at 855-436-8724 Monday-Friday 8 am-5 pm EST.
To register your device, complete the form in the back of the User Guide or visit
www.breas.us
Z2 Auto QS CA EN, MMDD2019
Doc. 40-0130 CA EN Y-1
Breas Medical, Inc. 16 Esquire Road, N. Billerica, MA 01862, USA
Z2 Auto™ is a trademark of Breas Medical, Inc. Qtube® and Z-Breathe® are registered trademarks of
Breas Medical, Inc. Breas and the Breas logo are registered trademarks of Breas, AB. All other trademarks
are the property of their respective owners.
US Patent Pending. © Copyright 2014-2019, Breas Medical, Inc. All rights reserved.
1. Treatment pressure display
2. Ramp progress indicator (if ramp set)
3. Ramp time remaining (if ramp set)
4. Battery status (if present)
5. AC Power indicator (if connected)
6. General status display
7. Fault indicator (if fault occurs)
FAULT
LCD Display Overview
The Z2 display offers useful information on device settings. Below is a brief overview
of the information available using the built-in LCD. For more information, please refer
to the Z2 Auto User Guide.
For complete Instructions for Use, please see the Z2 Auto User Manual.
Box Contents
Z2 Auto Device
Power Supply (AC Adapter and Power Cord)
Custom USB A to Micro B Cable
Custom CPAP Tube Adapter
4 ft. Slim Style CPAP Tube
Filters (2 – 1 installed in Z2, 1 in box)
Heat / Moisture Exchanger (HME)
Qtube Muffler
8 in. Slim Style Tube
Z2 Auto Quick Start Guide
Z2 Auto User Guide
HME
Power Cord
USB Cable
AC Adapter
Filter
Z2 Auto
4 ft. Slim-style
CPAP tube
Tube Adapter
8 in. CPAP tube
Qtube
Z2 Auto Nitelog®Bluetooth App
Your Z2 Auto has a range of functionality from device remote control to data view-
ing available via its embedded Bluetooth capability. The Z2 Nitelog®App is available
for download at the App Store™ for Apple devices or at Google Play for Android
devices. Separate Z2 Nitelog®App User Guides are available for download on the
Breas Medical web site, www.breas.us. The App User Guides provide an overview of
the App as well as detailed use instructions.
Sleep Data Software
Breas Medical provides user software for data viewing which may be downloaded
from the Breas Medical website to any Windows computer. A separate user guide for
this software is available for download at the Breas Medical website, www.breas.us.
If appears in the general status display, the internal battery needs replacement, so the device
has stopped logging data. Call Breas to arrange for the battery to be replaced. Until then therapy will
continue to be provided.
9Replacing the Filter
The Z2 comes with a Filter preinstalled
at the factory plus a replacement Filter.
When it is time to replace the filter,
remove the End Cap by squeezing the
sides and pulling down. Insert the new
filter into the End Cap as shown, with
arched side of the filter aligned with the
top of the End Cap. Ensure the filter covers
all holes in the end cap. Press the End Cap
onto the Z2.

Welcome!
Congratulations on choosing the ultra-small, lightweight Z2 Auto machine!
Your new Z2 has been programmed with your prescribed setting and is almost
ready for use. Please read the instructions below before using the Z2.
NOTE: The Auto Start / Stop Feature will stop the therapy if a large
air leak is detected between the Z2 outlet and the mask. This may
also happen at times when the mask is not being worn properly.
This common condition should be resolved once all connections
are secure, the mask is properly worn, and the Start/Stop Button has
been pushed or you start to breathe through the mask.
8Accessories- Qtube® and HME
Your Z2 comes with two accessories – the Qtube muffler and the HME
(Heat Moisture Exchanger).
The Qtube is a reusable accessory designed to reduce acoustic noise
transmitted to the mask through the CPAP tube. See illustration below for
where to install it.
The HME (Heat Moisture Exchanger) works to provide humidification
by capturing the moisture as you exhale and provide it back to you as
you breathe. The HME is installed as close to the mask as possible. See
illustration below.
The HME should be discarded after seven days of consecutive use or
when it fails to provide adequate humidification.
8 in. Tube
Tube Adapter
Z2 Auto
Qtube
4 ft. Tube
HME
Mask (not included)
1Connecting the Tube
Connect the CPAP tube to the round end
of the tube adapter. Insert the other end of
the tube adapter into the outlet of the Z2 as
shown.
Connect the other end of the CPAP tube to
the mask.
Ensure all connections are tight to avoid air
leaks.
2Connecting the Power
Plug the power supply into the Z2 as shown
and into a wall outlet. The Z2 will go into
standby mode displaying on the screen.
The Z2 display will always be active
whenever the device is receiving power.
3Starting Therapy
To initiate therapy, push the Start/Stop
Button ( ) or place the mask on your face
and start breathing. The Auto Start / Start
Feature will start the therapy automatically.
NOTE: The Auto Start / Stop feature
may not work with the use of a full
face mask due to its design. In this
case you will need to press the Start/
Stop Button to start the therapy.
4Stopping Therapy
To stop therapy, either press the Start/Stop Button ( ) again or remove your
mask and the Auto Start / Stop Feature will automatically stop therapy.
5Choosing between CPAP and Auto CPAP Mode
The mode, CPAP or Auto CPAP, is set at the same time as the
Z-Breathe setting. The mode is designated on the LCD screen
by either CPAP for CPAP or APAP for Auto CPAP. The Z-Breathe
setting, 1, 2, or 3, is the number that follows the mode. To set
the mode and the Z-Breathe, plug the power supply into the
Z2 and wait for it to get to standby mode (screen displays ). Press and hold
the UP ( ) or DOWN ( ) ARROWS at the same time. CPAP or APAP will apear on
the screen. Press the UP ( ) or DOWN ( ) ARROW to change modes and select
the Z-Breathe setting. Press and hold the Start/Stop Button ( ) to save the
selection.
6Programming Treatment Pressure
In CPAP Mode
With the Z2 in standby mode (screen displays ), press and hold the Start/
Stop
Button ( ) until the pressure number flashes. Use the UP ( ) or DOWN ( ) ARROW
to adjust to your prescribed pressure. Press and hold the Start/Stop Button ( )
to save the selection.
In Auto CPAP Mode
tube
adapter
tube
7Setting Ramp
Ramp Time and initial Ramp pressure is adjusted while the Z2 is in
standby mode (screen displays ).
To set the Ramp Time, press and hold the UP ARROW ( ) until the
Ramp Time flashes. Press the UP or DOWN ARROW until the desired
setting is reached. Press and hold the START/STOP BUTTON ( ) to save
the new setting.
To set the initial Ramp pressure, press and hold the DOWN ARROW ( )
until the pressure display flashes. Press the UP or DOWN ARROW until the
desired setting is reached. Press and hold the START/STOP BUTTON ( )
to save the new setting.
With the Z2 in standby mode (screen displays ), press and
hold the Start/Stop Button ( ) until the words APAP HI
appears and the pressure number flashes on the screen.
Us the UP ( ) or DOWN ( ) ARROW to adjust the higher
number on the pressure range on your prescription. Press
and hold the Start/Stop Button ( ) to save the setting.
Next APAP LO appears and the pressure number flashes.
Use the UP ( ) or DOWN ( ) ARROW to adjust the pressure
to the lower number on the prescription. Press and hold
the Start/Stop Button ( ) to save the selection.