
7
F. Hot air outlet
G. Power cord
H. Drying base
I. Elastic hanging cord
WHAT IS A DEHUMIDIFIER?
Your Breville mini dehumidifier is designed
to reduce moisture in small and compact
spaces, such as wardrobes and drawers, to
prevent mould and mildew in its surrounds.
The mini dehumidifier is reusable and perfect
for protecting closets, wardrobes, drawers,
bookcases, handbags, cars, and shoe boxes
where excess moisture may be present.
This device is designed for compact enclosed
spaces. For larger open spaces please review on
breville.com for more suitable models.
HOW DOES A SILICA BEAD
DEHUMIDIFIER WORK?
The silica beads absorb moisture from the
air surrounding the unit and the beads in the
viewing window change colour to indicate
when they are saturated and need drying.
When the beads in the viewing window turn
green, return the mini dehumidifier to the
drying base to dry. Once the silica beads turn
orange again, the mini dehumidifier is ready
for dehumidification once again.
NOTE
The drying base is only for drying the mini
dehumidifier and is not required during
dehumidification. Only the drying base
contains electrical parts.
BEFORE FIRST USE
1. Before using your mini dehumidifier for the
first time, remove all packaging material and
promotional labels.
2. Check for any missing or damaged parts as
per the components list.
3. Clean all parts according to the Care, Cleaning
& Storage section of this book.
4. Check the colour of the silica beads in the
viewing window.
• Orange indicates the mini dehumidifier is
ready to use for dehumidification.
• Green indicates the mini dehumidifier
needs to be dried using the drying base
provided.
DRYING THE MINI DEHUMIDIFIER
If the silica beads in the viewing window are
green, the beads have absorbed moisture to
capacity and it is time to place the unit on the
drying base. Use only the drying base designed to
be used with this mini dehumidifier to dry.
1. Position the base at least 10cm from any
obstructions before use.
2. Connect the power plug of the drying base to
a 230V or 240V outlet and switch on at the
outlet. A white indicator light will flash on the
drying base indicating the base is in standby
mode.
3. Place the mini dehumidifier onto the drying
base. This will engage the detector switch and
activate the hot air outlet to begin drying the
silica beads. The indicator light will illuminate
green while drying and the silica beads will
gradually change colour from green to orange.
4. The drying base will operate for 2 hours, then
automatically stop and return to standby
mode.
5. Once drying is complete, the indicator light
will flash white again as the drying base
Features