Bristan WASTES W BASIN04 BB Mounting instructions

Installation Instructions
and User Guide
Clicker Basin Waste
Models Covered:
Slotted and Unslotted
Clicker Basin Wastes
Please keep this booklet for future
reference.
Installer, when you have read these
instructions please ensure you leave
them with the user.

Thank you for choosing Bristan, the UK’s leading taps and showers expert.
We have designed this product with your enjoyment in mind. To ensure that it works
to its full potential, it needs to be fitted correctly. These fitting instructions have been
created to give you all of the information you need and, if you need any further help,
please do not hesitate to give us a call on 0330 026 6273.
Slotted Wastes -
1. Waste Flange
2. Upper Rubber Washer
3. Lower Rubber Washer
4. Waste Body and Back Nut
Unslotted Wastes -
1. Clicker Mechanism
2. Flange
3. Upper Rubber Washer
4. Lower Rubber Washer
5. Backnut
6. Waste Body
2Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Introduction
Components

Slotted Wastes -
1. Identify all components are present prior to installation.
2. Unscrew the backnut (4) and remove the lower washer (3). Fit the waste above
the basin with the upper washer (2). Locate the bottom waste.
3. Secure waste with backnut (4) and the lower washer (3).
4. In order to fill the basin, the ‘Clicker’ mechanism of the waste needs to be
pressed down. To release water, press the button again.
5. Check all joints and connections for leaks.
6. See below for aftercare instructions.
Unslotted Wastes -
1. Identify all components are present prior to installation.
2. Unscrew the clicker mechanism (1) from the flange (2) and the flange from the
waste body (5).
3. Fit the lower rubber washer (4) onto the waste body (6) and put under the
basin. Fit the upper rubber washer (3) to the flange (2) and screw through the
basin into the waste body.
4. Screw the clicker mechanism (1) back into the flange (DO NOT OVERTIGHTEN)
5. Check all joints and connections for leaks.
6. See Below for aftercare instructions.
3
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Installation
General Cleaning
Bristan products are made from premium materials, with hand polishing and
electroplated finishes.
Your waste should be regularly cleaned with warm water, a mild pH-neutral liquid soap, and
polished with a soft cloth. Any residues from soap, toothpaste, shampoos and shower gels
can cause blemishes if not rinsed o straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage the
surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or any-
thing similar.
Some surfaces such as nickel and pewter may be aected by the dye found in some cloths,
so it is also important to avoid
hanging cloths on surfaces.

At Bristan, we want to make things as easy as possible for our customers. That’s why we oer solid
guarantees on all our products, eective from the date of purchase, to give you peace of mind.
To start your free guarantee simply scan the QR code and register your product.
Alternatively visit www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where our expert team
of advisors will be able to oer you any help and advice.
For full guarantee terms and conditions visit www.bristan.com/service-centre/guarantees.
Bristan Group Ltd.
UK: Bristan Group, B78 1SG.
EU: Masco Europe S.à.r.l.
14 Rue Strachen
6933 Mensdorf
Luxembourg
Customer Service: [phone]
Web: www.bristan.com
Email: [e-mail]
A Masco Company
Part Number: FI Clicker Wastes
Issue: D6