Brodit 841488 User manual

25 May, 2020, www.brodit.com, © 2020 Brodit AB
Product 841488
841488 Holder for Cable Attachment For Motorola cable.
Holder with cable plug attachment. To be used with Motorolas original cable The cable is easy to attach to the
holder, and then the cable connects to the radio automatically when you put your unit in the holder so you do not
have to connect it manually each time. (Cable not included).
EAN: 7320288414881
Item no 841488 fits:
Motorola MTP 850 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all instructions and look at the pictures before attaching the holder.
1. Installation of cable: Place the holder with the backside upwards. Peel off the adhesive tape cover on the
holder. Place the connector into the lower part of the holder. Place the back piece over the connector, make sure
the cable is in the correct position. Screw the back piece into place using the removed screws. The cable is in
place.
2. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the
back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.
3. Place the holder over the attaching part. Screw the holder onto the attaching part.
4. The holder in place, with cable in place.