Brodit 852598 ProClip User manual

2 June, 2020, www.brodit.com, © 2020 Brodit AB
Product 852598
852598 ProClip
Angled mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288525983
Item no 852598 fits:
Opel Astra 98-03 (For Europe)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel
and the dashboard, to widen the gap. Open the glove compartment. Press the curved edge on the left part of the
ProClip into the gap below the gap opener.
2. Flip the ProClip rightward/forward so the left curved edge hooks under the frame surrounding the control panel.
Pull out the gap opener.
3. Press the gap opener into the gap between the glove compartment and the dashboard and hold it in the gap.
Press the right part of the ProClip leftward, toward the center console sidewall. Then press forward/upward so the
grooved edge goes into the gap below the gap opener. Press until you hear/feel it snaps into place. Pull out the
gap opener. Close the glove compartment.
4. The ProClip is in place.