Brodit ProClip 855113 User manual

16 December, 2016, www.brodit.com, © 2016 Brodit AB
Product 855113
855113 ProClip
Center mount
The ProClip is a mounting bracket that you attach onto the vehicle’s dashboard. It provides a mounting platform
for mobile phones and other devices that you want to have within easy sight and reach in the car. Safe, neat and
convenient! The ProClip has a perfect fit, it is custom made for each vehicle to ensure a secure base for
installations.
The ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to
drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed
installation instructions. The mounting plate is equipped with predrilled holes which make the installation of
equipment on the ProClip easier. The holes suit all Brodit holders and other products with standard holes, the
hole pattern constists of one set of AMPS-holes as well as two sets of double-holes placed in different height.
View demo video
EAN: 7320288551135
Item no 855113 fits:
Daf XF 14-17 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap on the top side of the dashboard, to widen the gap. Remove the adhesive tape
cover on the ProClip. Push onto the gap opener to keep it in place while inserting the angled top part of the
ProClip into the gap next to the gap opener. Remove the gap opener.
2. Pull the bottom part of the ProClip downward/backward so the angled edge goes all the way into the gap.
3. Hook the angled lower part of the ProClip around the edge of the dashboard.
4. The ProClip is in place.
2(2)