Brodit ProClip 804455 User manual

26 May, 2020, www.brodit.com, © 2020 Brodit AB
Product 804455
804455 ProClip
Left mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288044552
Item no 804455 fits:
Citroen C3 10-16 (For Europe)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Pull out the rubber sealent on the A-post slightly, to widen the gap. Press the angled edge
on the lower part of the ProClip into the gap and hook it behind the A-post.
2. Press the ProClip upward/forward so the angled upper edge hooks around the A-post by the windshield.
3. Press the upper part of the ProClip toward the A-post so the angled edge hooks into place properly.
4. The ProClip is in place.