Brodit ProClip 854740 User manual

19 April, 2012, www.brodit.com, © 2012 Brodit AB
Product 854740
854740 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288547404
Item no 854740 fits:
BMW 3-series F30 12 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Press the angled edge on the lower part of the ProClip into the gap between the frame
surrounding the air vent and the control panel.
2. Press forward on the ProClip so the angled upper edge hooks into the gap between the frame surrounding the
air vent and the dashboard.
3. Press until you hear/feel that the angled edge snaps into place in the gap. Press downward on top of the
ProClip so the angled egde goes all the way into the gap.
4. The ProClip is in place.
2(2)