Brodit ProClip 855176 User manual

28 May, 2020, www.brodit.com, © 2020 Brodit AB
Product 855176
855176 ProClip
Angled mount
The ProClip is a mounting bracket that you attach onto the vehicle’s dashboard. It provides a perfect mounting
platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and
convenient!
The ProClip has a perfect fit, it is custom made for each vehicle to ensure a secure base for installations. And the
ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill
holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed
instructions.
View demo video
EAN: 7320288551760
Item no 855176 fits:
Toyota HiLux 16-20 (For Europe)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip.
1. Insert the thin end of the enclosed gap opener into the gap of the trim dividing the dash, to widen the gap. Use
the enclosed alcohol pad to clean the area where the ProClip is to be installed. Remove the adhesive tape covers
on the ProClip.
2. Insert the lower edge of the ProClip into the gap next to the gap opener. Remove the gap opener.
3. Insert the angled upper edge of the ProClip into the gap on the lower inside of the air vent. Press until the edge
goes all the way into the gap and the adhesive tape fastens properly.
4. The ProClip is in place.