Brodit Proclip 854796 User manual

19 March, 2015, www.brodit.com, © 2015 Brodit AB
Product 854796
854796 ProClip
Angled mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288547961
Item no 854796 fits:
Ford C-Max 13-15 (For USA)
Ford Escape 13-15 (For USA)
Ford Escape Hybrid 13-15 (For USA)
Ford Kuga 13-15 (For Europe)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the center console panel frame and the console edge, to widen the
gap. Peel off the cover of adhesive tape on the ProClip.
2. Hook the angled edge on the right side of the ProClip around the center console edge.
3. Place your index fingers underneath the ProClip and your thumbs on top of the ProClip. Pull the ProClip
slightly towards you. Hook the angled edge over the console edge and into the gap above the gap opener. Pull
out the gap opener.
4. The ProClip is in place.
2(2)