Brodit 541861 User manual

15 July, 2021, www.brodit.com, © 2021 Brodit AB
Product 541861
541861 Holder for Locking Passive holder with Vesa-holes. With spring stud locking. Fits unit both with and
without Kick-Stand with Hand-Strap.
The holder with locking is to be used when you want to have your tablet extra firmly in place. The holder has a
spring stud locking device, it keeps your device in a firm grip in the holder. You can connect e.g. a charging cable
to the device when it is in the holder.
The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac
without having it easy removable. The holder is made of extra strong plastic. Fits units both with and without
handstrap.
EAN: 7320285418615
Item no 541861 fits:
Getac RX10 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Place the holder onto the desired position. Screw the holder into place with the enclosed screws.
2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part
forwards so it snaps into place in the holder. Push the locking block downward to lock the unit into the holder.
3. To remove the device from the holder: Slide the locking block upwards. Pull the upper part of the device out
from the holder and then lift the device up and out from the holder.
4. The holder is in place.