Brodit ProClip 853796 User manual

17 September, 2013, www.brodit.com, © 2013 Brodit AB
Product 853796
853796 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288537962
Item no 853796 fits:
Renault Clio III 06-12 (For Europe)
Renault Clio Tourer 08-12 (For Europe)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip. It is important to place the
ProClip exactly as shown in the pictures.
1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard, to
widen the gap. Peel off the adhesive tape covers on the ProClip. Press the curved edge on the lower part of the
ProClip into the gap next to the gap opener.
2. Flip the ProClip upwards/forwards so the curved lower edge hooks behind the control panel. Pull out the gap
opener.
3. Press the gap opener into the gap between the air vent frame and the dashboard. Press forwards on the upper
part of the ProClip so the angled edge goes into the gap next to the gap opener. Press downwards on top of the
ProClip so the angled edge goes all the way into the gap. Pull out the gap opener.
4. The ProClip is in place.
2(2)