Broyhill Legacy GB21-803 User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GB21-803
SKU# : 810500149
THORNWOOD AW WICKER TWO SEAT SOFA
WITH CUSHION
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at customers[email protected],customer[email protected]
customerser[email protected]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tighten until the complete piece is
assembled ( This will make the assembly process much easier ).
Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the sofa is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Sofa is for sitting purposes only. Standing on or misuse of sofa may result in damage or injury.
Weight limit is 500 lbs ( 227.3 kg). Not intended for commercial use.
MAINTENANCE
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use
bleach, acid, or other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming
upholstery cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
Well recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your product.
In order to prolong the life and beauty of your product, we recommend that it be stored in a dry and
protected area during off season periods.
GENERAL BEST PRACTICE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

Part No. Part Qty Image Part No. Part Qty Image
1Sofa Back 1 6 Back Cushion 2
2Sofa Seat 1 7 Sofa Foot 4
3Right Arm 1 8 Bolt (M10x110mm) 4
4Light Arm 1 9 Bolt (M6x25mm) 8
5Seat Cushion 2 10 Bolt (M6x45mm) 4
Tools
PARTS LIST:

PART REQUIRED: 2, 3 & 4
Keep the bolts loose.
PART REQUIRED: 1, 3 & 4
Keep the bolts loose.
STEP 1
STEP 2
1
4、3
Screw in half length of the bolt
Slide in the bolt to the die cut
1
4
1
3
9
X4
9
X2
2
3
4

PART REQUIRED: 1, 2, 3 & 4
Keep the bolts loose.
PART REQUIRED: 1, 2, 3 & 4
Keep the bolts loose.
STEP 3
9
X2
STEP 4
10
X4
4
3
2
1
1
2
3
4