Broyhill EASTLAKE GB21-820 User manual

ASSEMBLY INSTRUCTION
ITEM# : GB21-820
SKU# 810499642
EASTLAKE SIDE TABLE
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail], [e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to being
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Helpful hints provided along the way
WARNINGS:
Use the correct screws as indicated. All screws should be hand tighten untill the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all screws with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct screws as indicated. Do not tighten any of the screws until the table is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
The table is not to be used for standing purposes, standing on or misuse of ottoman may result in damage or injury.
Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use.
MAINTENANCE
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on
the frame or fabric parts.
Well recommend the use of furniture covers when not in use.
Inspect and tighten all of the screws and fasteners on a regular basis to ensure the proper performance and safety of your product.
In order to prolong the life and beauty of your product, we recommend that it be stored in a dry and protected area during off season periods.
GENERAL BEST PRACTISE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:
WARNINGS:

PARTS LIST
Part No. Part Qty Image Part No. Part Qty Image
1Table Top 14Table Base 1
2Table Upper Leg 15Screw(φ6x15mm) 8
3Table Bottom Leg 16Washer 8
Tools
STEP 2
PART REQUIRED: 1, 2 & 3
Keep the screws loose.
PARTS LIST:
STEP 1
X4
X4
5
6
5
6

STEP 2
PART REQUIRED: 1, 2, 3 & 4
Keep the screws loose.
Tighten all the screws.
Finished!
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 2
STEP 3
5
6
5
6
X4
X4