Broyhill H21GS155VS User manual

ASSEMBLY INSTRUCTION
ITEM#: H21GS155VS
SKU#: 810544444
Need help? We are here for you! 1 (877) 800 – 6021 • Toll Free
[email protected] • Email Address
SANDPOINTE
5PC SECTIONAL SET

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference.
Wash frame, wicker and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame, wicker or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your
chair, table and ottoman.
When moving the table, lift. Do not drag this table.
In order to prolong the life and beauty of your chair, table and ottoman we recommend that it be stored in a dry and
protected area during off season periods.
Regularly check hardware and tighten if necessary
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Do not sit or stand on this table. Misuse of the table may result in damage or injury.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Sofa is for sitting purposes only. Standing on or misuse of sofa may result in damage or injury. Not intended
for commercial use. Weight limit for one sofa is 750 lbs (340.5 kg).
Do not sit or stand on table. Misuse of table may result in damage or injury. Not intended for commercial use.
Ottomans are for sitting purposes only. Standing on or misuse of ottomans may result in damage or injury.
Not intended for commercial use. Weight limit is 250 lbs (113.5 kg).
PAGE 1 OF 12
To Ensure Alignment & Easy Assembly, Secure All Bolts & Washers In Place Before Fully Tightening

H21GK018VZ
2
1 1
1
1
19
9
8
10
11
12
13
4
3
PART
NO. MATERIAL CODE PART Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
SUPPORT BACK CUSHION
BOLT M6*15
SEAT CUSHION
H21GK018VZ-BG
H21GK018VZ-ZG
H21GK018VZ-ZSB
H21GK018VZ-ZZG LM-M6
H21GK018VZ-BM 3
PARTS LIST
JAM NUT M6*1.0
24
DP-d6.5-D13
9
4
LS-M6-50
PTLS-M8-100
1
4
5
6
7
WASHER d6.5*D13*1.0
BOLT M6*50
BOLT M8*100
H21GK018VZ-JZG
H21GK018VZ-JD H21GK018VZ-ZM 3
6
LS-M6-15
500 10 20 30 40 60 70 80 90
mm 100
LEG
LEG CAP
Ⅰ
Ⅱ
Tools
Ⅰ
Ⅲ
Ⅳ
PAGE 2 OF 12

PAGE 3 OF 12
STEP 1
STEP 2
PARTS REQUIRED: 1, 2, 8, 10, & 11
Keep the bolts loose.
x5
8
x10
10
1
2
8
10
10
11
x5
11
PARTS REQUIRED: 1, 2, 3, 8, 10, & 11
Tighten all bolts by using the supplied Hex key.
x4
8
x8
10
1
3
2
8
8
10
11
11
x4
11
10
10
10
3
1

PAGE 4 OF 12
STEP 3
STEP 4
PARTS REQUIRED: 1, 2, 4, 7, & 10
Tighten all bolts by using the supplied Hex key.
x4 x4
7 10
2
1
10
7
7
4
PARTS REQUIRED: 1, 2, 5, 7, & 10
Tighten all bolts by using the supplied Hex key.
x2 x2
7 10
2
1
5
710
10

PAGE 5 OF 12
STEP 5
PARTS REQUIRED: 1, 2, 3, 6, & 9
Tighten all bolts by using the supplied Hex key.
x4 x4
6 9
STEP 6
6
2
1
3
9
PARTS REQUIRED: 12 & 13
13
13
13
12 12 12

H21GK018VN
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
CHAIR ASSEMBLY
LEG LEFT BACK CUSHION
RIGHT BACK CUSHION
BACK CUSHION
SEAT CUSHION
1
5
6
7
8
9
10
2
3
4
1
1
H21GK018VN-YJ
H21GK018VN-JZG H21GK018VN-ZBM
H21GK018VN-YBM
H21GK018VN-BM
H21GK018VN-ZM
4
H21GK018VN-JD
LS-M6-15
LEG CAP
BOLT M6*15
4
4
PTLS-M8-100
BOLT M8*100
4
1
1
2
3
DP-d6.5-D13
WASHER d6.5*D13*1.0
PARTS LIST
PAGE 6 OF 12
STEP 1
PARTS REQUIRED: 1, 2, 3, 4, 5, & 6
Tighten all bolts by using the supplied Hex key.
x4
3
x4
4
x4
6
x4
5
2
5
3
1
4
4
6
6

PAGE 7 OF 12
STEP 2
PARTS REQUIRED: 7, 8, 9, & 10
9987
10
10
10

H21GT759MD
PARTS LIST
TABLE TOP
LEG A
BOLT M6*15
1 5
6
7
2
4
1
1 8
4
H21GT759MD-ZM
H21GT759MD-JA
LS-M6-15
Q’TYPART
PART
NO. MATERIAL CODE
PTLS-M8-100
BOLT M8*100
4
H21GT759MD-JD
PLASTIC LEG CAP
8
DP-d6.5-D13
WASHER d6.5*D13*1.0LEG B
3 1
H21GT759MD-JB
PARTS REQUIRED: 2, 3, 4, & 6
Tighten all bolts by using the supplied Hex key.
x4
4
x4
6
66
442 3&
STEP 1
PAGE 8 OF 12

STEP 3
PARTS REQUIRED: 1 ,2, 3, 5 & 7
Tighten all bolts by using the supplied Hex key.
x8
5
x8
7
23
5
5
77
1
STEP 2
PAGE 9 OF 12