Broyhill LEGACY SVS30US User manual

THORNWOOD SWIVEL GLIDER
Need help? We are here for you! 1 (877) 539 – 7436 • Toll Free
ASSEMBLY INSTRUCTION
ITEM#: SVS30US
SKU#: 810499292
[email protected] • Email Address

PAGE 1 OF 6
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Do not sit or stand on this table. Misuse of the table may result in damage or injury.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Chairs are for sitting purposes only. Standing on or misuse of chair may result in damage or injury. Not intended
for commercial use. Weight limit is 250 lbs (113 kg).
Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference.
Wash frame, wicker and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame, wicker or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your
chair, table and ottoman.
When moving the table, lift. Do not drag this table.
In order to prolong the life and beauty of your chair, table and ottoman we recommend that it be stored in a dry and
protected area during off season periods.
Regularly check hardware and tighten if necessary
Do not sit or stand on table. Misuse of table may result in damage or injury. Not intended for commercial use.

E-320
RVS9536
PAGE 2 OF 6
500 10 20 30 40 60 70 80 90
mm 100
Ⅰ
Ⅱ
Tools
PARTS LIST
2
1 1
1
1
1
1
6
8
7
9
4
3
PART
NO. MATERIAL CODE PART Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
RIGHT ARM
BOLT M6*15
SEAT CUSHION
BACK CUSHION
RVS9536-CS03-1
RVS9536-CS02-1
RVS9536-CS01-2
RVS9536-CS01-3
61R9536X00001BA
61R9536Y00001BA 1
2
10
17C33A0714001YX
17FA05040301-YX
85
BOLT M6*40
WASHER d6.5*D13*1.0
17C33A0706001YX
STEP 1
PARTS REQUIRED: 1, 2, 6, & 7
Keep the bolts loose.
1
7
2
6
x2
6
x2
7

E-320 PAGE 3 OF 6
STEP 2
PARTS REQUIRED: 2, 3, 4, 5, & 7
Keep the bolts loose.
STEP 3
PARTS REQUIRED: 1, 3, 4, 5, & 7
Tighten all bolts by using the supplied Hex key.
x4
5
x4
7
L
R
Note:
The labels marked “L” and “R” on arms (#3 and #4)
should coincide with Figure 2 to ensure proper assembly.
5
7
2
3
4
7
5
1
3
4
7
5
x4
5
x4
7

E-320
STEP 4
PARTS REQUIRED: 8 & 9
8
9
PAGE 4 OF 6

PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1 1
2
3
4
412
1
TABLE TOP
LEG
SUPPORT
5
12
17C33A0706001YX
17FA05040301-YX
TMS20LQ-CS05-1
TMS20LQ-CS04-1
62TMS20LQY101
WASHER d6.5*D13*1.0
BOLT M6*15
TMS20LQ
STEP 1
PARTS REQUIRED: 1, 2, 4, & 5
Keep the bolts loose.
x8
4
x8
5
1
2
44
5
5
2
2
2
PAGE 5 OF 6

STEP 2
PARTS REQUIRED: 2, 3, 4, & 5
Tighten all bolts by using the supplied Hex key.
x4
4
x4
5
2
2
2
3
2
4
5
STEP 3
Warranty
• One–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer’ s responsibility for freight and packing charges to and from the service center.
PAGE 6 OF 6