Broyhill PEMBROKE SH22SK1224 User manual

ASSEMBLY INSTRUCTION
ITEM#: SH22SK1224
SKU#: 810580414
Need help? We are here for you! 1 (877) 800 – 6021 • Toll Free
[email protected] • Email Address
PEMBROKE
SECTIONAL SOFA SET

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference.
PAGE 1 OF 14
To Ensure Alignment & Easy Assembly, Secure All Bolts & Washers In Place Before Fully Tightening
Regularly check hardware and tighten if necessary
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Do not sit or stand on this table. Misuse of the table may result in damage or injury.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Sofa is for sitting purposes only. Standing on or misuse of sofa may result in damage or injury. Not intended
for commercial use. Weight limit for one sofa is 500 lbs (227 kg).
Do not sit or stand on table. Misuse of table may result in damage or injury. Not intended for commercial use.
Not intended for commercial use. Weight limit is 250 lbs (113.5 kg).
Wash frame, wicker and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame, wicker or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your
chair and table.
When moving the table, lift. Do not drag this table.
In order to prolong the life and beauty of your chair and table we recommend that it be stored in a dry and protected
area during off season periods.

HKVS915X
2
1 1
1
1 5
7
6
8
9
10
11
4
3
PART
NO. MATERIAL CODE PART Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
BACK CUSHION
BOLT M6*35 SEAT CUSHION
HKVS915X-BG
HKVS915X-ZG
HKVS915X-ZSB LM-M6
HKVS915X-BM 2
PARTS LIST
JAM NUT M6*1.0
22
DP-d6.5-D13
8
LS-M6-45
4
5
WASHER d6.5*D13*1.0
BOLT M6*45
HKVS915X-JD
HKVS915X-ZM 2
4
LS-M6-35
500 10 20 30 40 60 70 80 90
mm 100
LEG CAP
Tools
PAGE 2 OF 14
5
LS-M6-50
BOLT M6*50
STEP 1
PARTS REQUIRED: 1, 3, 5, & 8
Keep the bolts loose.
x2
5
x2
8
1
3
5
8

PAGE 3 OF 14
STEP 2
STEP 3
PARTS REQUIRED: 2, 3, 5, & 8
Tighten all bolts by using the supplied Hex key.
8
2
3
5
5
8
8
x2
5
x2
8
PARTS REQUIRED: 1, 2, 7, 8, & 9
Tighten all bolts by using the supplied Hex key.
2
1
9
7
8
8
x5
7
x10
8
x5
9

PAGE 4 OF 14
STEP 4
STEP 5
PARTS REQUIRED: 10 & 11
PARTS REQUIRED: 1, 2, 3, 4, 6, & 8
Tighten all bolts by using the supplied Hex key.
x4 x8
4 6
1
6
6
2
3
4
8
8
x8
8
11
11
10 10

HKVS915Y
PAGE 5 OF 14
PARTS LIST
2
1 1
1
1 5
7
6
8
9
10
11
4
3
PART
NO. MATERIAL CODE PART Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
RIGHT ARM
BACK CUSHION
BOLT M6*35 SEAT CUSHION
HKVS915Y-BG
HKVS915Y-ZG
HKVS915Y-ZSB LM-M6
HKVS915Y-BM 2
JAM NUT M6*1.0
22
DP-d6.5-D13
8
LS-M6-45
4
5
WASHER d6.5*D13*1.0
BOLT M6*45
HKVS915Y-JD
HKVS915Y-ZM 2
4
LS-M6-35
LEG CAP
5
LS-M6-50
BOLT M6*50
STEP 1
PARTS REQUIRED: 1, 3, 5, & 8
Keep the bolts loose.
x2
5
x2
8
1
3
5
8

PAGE 6 OF 14
STEP 2
STEP 3
PARTS REQUIRED: 2, 3, 5, & 8
Tighten all bolts by using the supplied Hex key.
8
2
3
5
5
8
8
x2
5
x2
8
PARTS REQUIRED: 1, 2, 7, 8, & 9
Tighten all bolts by using the supplied Hex key.
2
1
9
7
8
8
x5
7
x10
8
x5
9

STEP 4
PARTS REQUIRED: 1, 2, 3, 4, 6, & 8
Tighten all bolts by using the supplied Hex key.
x4 x8
4 6
1
6
6
2
3
4
8
8
x8
8
STEP 5
PARTS REQUIRED: 10 & 11
11
11
10 10
PAGE 7 OF 14

HKVS915Z
STEP 1
PAGE 8 OF 14
2
1 1
1
1 5
7
6
9
10
11
12
4
3
PART
NO. MATERIAL CODE PART Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
BACK CUSHION A
BOLT M6*35 BACK CUSHION B
HKVS915Z-BG
HKVS915Z-ZG
HKVS915Z-ZSB LM-M6
HKVS915Z-BMA 1
PARTS LIST
JAM NUT M6*1.0
20
DP-d6.5-D13
8
LS-M6-45
4
5
WASHER d6.5*D13*1.0
BOLT M6*45
HKVS915Z-JD
HKVS915Z-BMB 1
2
LS-M6-35
LEG CAP
4
LS-M6-50
BOLT M6*50
PARTS REQUIRED: 1, 3, 5, & 9
Keep the bolts loose.
x2
5
x2
9
1
3
81
LS-M6-65
BOLT M6*65
13
SEAT CUSHION
HKVS915Z-ZM 1
5
9

PAGE 9 OF 14
STEP 2
PARTS REQUIRED: 1, 2, 7, 9, & 10
Tighten all bolts by using the supplied Hex key.
x4
7
x8
9
STEP 3
7
7
9
9
9
9
10
10
12
2
x4
10
x1
8
x2
9
x1
10
PARTS REQUIRED: 2, 3, 8, 9, & 10
Tighten all bolts by using the supplied Hex key.
10
8
9
9
3