Broyhill GBO22-602-1 User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GBO22-602-1
SKU# : 810544469
ASHEVILLE SECTIONAL SET
RIGHT ARM SOFA AND LEFT ARM SOFA
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail],[e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tightened until the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the sofa is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Sofa is for sitting purposes only. Standing on or misuse of sofa may result in damage or injury.
Weight limit is 500 lbs ( 226.79 kg). Not intended for commercial use.
MAINTENANCE
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on
the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
Well recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your sofa.
In order to prolong the life and beauty of your sofa, we recommend that it be stored in a dry and protected area during off season periods.
GENERAL BEST PRACTICE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

PARTS LIST FOR
Part No. Part Qty Image Part No. Part Qty Image
R1 Sofa Back 1 8Short Bolt
(M6x20mm) 8
R2 Sofa Seat Panel 1 9Middle Bolt
(M6x36mm) 9
R3 Armrest 1 10 Long Bolt
(M6x44mm) 2
R4 Back Armrest Foot
( with one threaded hole) 111 Washer 18
R5 Front Armrest Foot
( with two threaded hole) 112 Back Cushion 2
6Back Foot 1 13 Seat Cushion 1
7Front Foot 1 16 U - shape
Connection Lock 1
Tools
Note: There are 1 pc PART 10 long bolt to match PART 16 U - shape connection lock. No
washer is needed for this one.
RIGHT ARM SOFA:
R1
R2
R3
R4
R5

STEP 1
PART REQUIRED: R3, R4 & R5
Keep the bolts loose.
Note: After assembled, keep all the threaded
holes inwards.
STEP 1
X4
X4
PRODUCT FRAME MAP
8
8
11
R4
R5
R3
R1
7
6
R5
R2
R4
R3
11

STEP 2
PART REQUIRED: R1, R2, 6 & 7
Keep the bolts loose.
PART REQUIRED: R1 & R3
Keep the bolts loose.
STEP 2
X6
X10
STEP 3
X1
X1
X4
R1
R3
11
11
6
9
11
R1
8
R2
7
9
8
R
R
11
10
11
10

STEP 3
PART REQUIRED: R2, R4 & R5
Keep the bolts loose.
PART REQUIRED: 12 & 13
Make sure the sofa stand on the ground stable, then tighten all the bolts.
Put the cushions on the seat.
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
R2
R4
R5
STEP 4
X3
X3
STEP 5
11
12
12
13
9
11
9

PARTS LIST FOR
Part No. Part Qty Image
Part
No.
Part Qty Image
L1 Sofa Back 1 8Short Bolt
(M6x20mm) 8
L2 Sofa Seat Panel 1 9Middle Bolt
(M6x36mm) 9
L3 Armrest 1 10 Long Bolt
(M6x44mm) 2
L4 Back Armrest Foot
( with one threaded hole) 111 Washer 18
L5 Front Armrest Foot
( with two threaded hole) 112 Back Cushion 2
6Back Foot 1 13 Seat Cushion 1
7Front Foot 1 16 U - shape
Connection Lock 1
Tools
Note: There are 1 pc PART 10 long bolt to match PART 16 U - shape connection lock. No washer
is needed for this one.
LEFT ARM SOFA:
L1
L2
L3
L4
L5

STEP 1
PART REQUIRED: L3, L4 & L5
Keep the bolts loose.
Note: After assembled, keep all the threaded
holes inwards.
STEP 1
X4
X4
PRODUCT FRAME MAP
8
L2
7
L5
6
8
L4
L1
L4
L3
11
L3
L5
11

STEP 3
PART REQUIRED: L1, L2, 6 & 7
Keep the bolts loose.
STEP 4
PART REQUIRED: L1, & L3
Keep the bolts loose.
L1
L3
STEP 2
9
8
11
11
10
11
STEP 3
X6
X10
X4
X1
X1
L1
L2
6
7
9
11
8
11
10

PART REQUIRED: L2, L4 & L5
Keep the bolts loose.
PART REQUIRED: 12 & 13
Make sure the sofa stand on the ground stable, then tighten all the bolts.
Put the cushions on the seat.
STEP 5
12
12
13
X3
X3
STEP 4
11
9
11
9
L2
L4
L5

REQUIRED: Sectional Set CTN#1 - Right Arm Sofa and Left Arm Sofa and CTN# 2 - Corner Sofa
Two other connection locks is included in the hardware pack for sectional sofa set CTN#2 - Corner Sofa .
PLEASE FIX SOFA SEAT TOGETHER WITH PROVIDED
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
REMINDER
10
16
X2
X2
16
10