Broyhill Legacy THORNWOOD A222011904 User manual

Need help? We are here for you! 1 [phone] 24/7 • Toll Free
THORNWOOD
ASSEMBLY INSTRUCTIONS
ITEM#: A222011904
SKU#: 810493508
THORNWOOD
6PK HIGH DINING CHAIRS

• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Chair is for sitting purpose only. Standing on or misuse of chair may result in damage or injury.
Not intended for commercial use.
• WEIGHT LIMIT 250 LBS(113KG).
• Keep all children and pets away from assembly area.
• Children and pets should be supervised when they are in the area of the Chair construction.
• Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry
line or electrical wires.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Before using, clean the Chair completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area.
• Steel components for this table are treated with rust inhibiting paint that protects it from rusting. However, due to the
nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and
thus not covered by the warranty.
WARRANTY:
WHAT IS COVERED ?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
2/9

EXPLODED DRAWING
3/9

PARTS LIST
4/9
Label Part Number Description Qty Part Image
A P004800006 Chair Back 1
B P007400028 Rotary Plate
Pre-assembled 1
C P005400520 Chair Leg 4
D P000501537 Footrest 1
E P001800173 Seat Cushion 1
F P005300082 Foot pad
Pre-assembled 4
G P005300047 Foot pad
Pre-assembled 4
JP008100019 Plastic plug
Pre-assembled 2
K P005300013 Plastic plug
Pre-assembled 2

Label Part Number Description Qty Add Part Image
H1 H010030030 Bolt M6*15 12 2
H2 H010030023 Bolt M6*35 4 1
H3 H050020017 Spring
Washer M6 16 2
H4 H050010025 Flat washer
M6 16 2
HW H090030002 Wrench M6 1 0
HARDWARE LIST
5/9

HELPFUL HINTS
• Separating parts before starting
How many people needed for the installation
6/9
Provided in hardware pack Provided

STEP 1
Assembled View:
Place the Footrest (D) on the Chair Back (A), then
attached Chair Leg (C) to Chair Back (A) with Bolt
(H1), Spring Washer (H3) and Flat washer (H4),
tighten the Bolt to 80% depth with Wrench(HW).
7/9
1x 4x
1x
12x 12x 12x

STEP 2
Assembled View:
Attached Footrest (D) to Chair Leg (C) with Bolt
(H2), Spring Washer (H3) and Flat washer (H4),
tighten the Bolt to 100% depth with Wrench(HW).
8/9
4x 4x 4x

STEP 3
Assembled View:
Put the Seat Cushion(E) on the Chair
Back(A).
1x
9/9